Brake Rotor Hats
Do you want your rotors to brake effectively and look sharp behind the wheel? The hat is the centre section of the brake rotor that mounts against the hub. Here we have drilled and slotted DBA rotors with a gold or black hat for the front and rear axle on, for example, pickups and sports cars.
What the hat means for the brake rotor
The hat is the part of the rotor that sits against the hub and carries the friction ring the pads work against. On these rotors the hat has a striking colour – gold on DBA Street Series and black on several rotors in the 4000 Series – so it stands out behind open-spoke wheels. Braking performance, however, depends on the friction ring, the pads and the brake system as a whole, not on the colour. If you are looking for rotors without a coloured hat, take a look at brake rotors or the entire disc brakes category.
How to choose the right rotor
- Car and axle: Each rotor is designed for the front or rear axle of a specific model, e.g. Chevrolet Silverado 1500 or Ford F-150. Check the model year, engine and variant, e.g. Z51 on the Corvette.
- Surface: Drilled and slotted rotors can help channel gas and heat away from the pad, while the 4000 Series is also available slotted only. What suits you depends on your driving and your pads.
- Pads: Choose brake pads that match the rotor type and use, or see rotor and pad kits.
- Approval: Whether the rotor is road legal depends on the product and the car. Check e.g. R90 for the specific part number.
New rotors and pads typically need to be bedded in before they brake optimally. Replace rotors in pairs on the same axle, and check thickness and any cracks at every pad change.
Frequently asked questions
Does a rotor with a gold hat brake better than a standard rotor?
Not because of the colour, which is primarily visual. Braking performance depends on the design of the friction ring, the pads, the brake fluid and how the brakes are used and maintained.
Are the brake rotors approved for inspection?
It depends on the product and the car. Check whether the specific part number has the relevant approval, e.g. R90, and that the rotor is designed for your exact car and axle before fitting it.
Can drilled brake rotors crack?
Over time, drilled rotors can develop small cracks around the holes, especially with repeated heavy heating. Check them at every pad change, and replace the rotor if the cracks join up or reach the edge.