0

Valve Stem Seals

Does your engine smoke blue right after start-up, or is the oil disappearing faster than before? Worn valve stem seals can be the cause. We stock seals for intake and exhaust valves, both for rebuilding original cylinder heads and for projects with new valve guides and valves.

What valve stem seals do

The seal sits on top of the valve guide and controls how much oil runs down along the valve stem. A little oil is needed to lubricate the stem, but too much can burn off in the combustion chamber and cause oil consumption, smoke and deposits. The exhaust side is typically exposed to higher temperatures, which is why separate versions exist, e.g. Ferrea seals in Viton Hi-Temp for exhaust valves. The seals work closely with valve guides and engine valves, so it is a good idea to check those at the same time.

How to choose valve stem seals

Fitment depends on several dimensions and details:

  • Stem diameter, e.g. 5.5 mm, 6 mm or 11/32 inch, which must match the valves.
  • Valve guide outer diameter, so the seal stays firmly in place. Brian Crower, for example, offers seals for both stock guides and its own guides.
  • Intake or exhaust, and whether the material can handle the engine's temperatures.
  • Spring seat: some seals have an integrated spring seat, which affects the setup with valve springs.

During installation, a protective sleeve is typically fitted over the valve's keeper grooves so the sealing lip is not damaged. Brands in this category include Fel-Pro, Supertech, COMP Cams, Ferrea and Cometic Gasket. You will find the other cylinder head parts under camshafts and valvetrain.

Frequently asked questions

How can I tell if my valve stem seals are worn?

A typical sign is blue smoke shortly after start-up or after a long period of idling, often together with increased oil consumption. It can also have other causes, such as piston rings, so a compression or leak-down test can help pinpoint the fault.

Do intake and exhaust seals need to be different?

It depends on the engine and the kit. Some kits use the same seal on both sides, while others have separate exhaust seals that typically need to withstand more heat. Check the description for the specific part number, and do not mix the types.

Can I replace valve stem seals without removing the cylinder head?

On many engines it is possible if the valve is held up, e.g. with compressed air in the cylinder, while the spring is compressed. Whether it is practical depends on the engine, and the job requires care so the valve does not drop.

View as Grid List
Sort by
Display per page