0

Transmission Mounts

Does the gear lever jerk when you release the clutch, or does shifting feel imprecise? A worn or soft transmission mount may be the cause. Here we gather mounts, pendulum mounts and reinforcements for you who want to keep the drivetrain more stable in your street car or your project.

What the transmission mount does

The transmission mount holds the gearbox in place relative to the body or subframe and absorbs vibrations and torsion from the drivetrain. If the mount is worn or soft, the gearbox can move under load. This is typically felt as a jolt when pulling away or slack in the gear shift. The mount works together with the engine mounts and any differential mounts, so it can be an advantage to look at them together.

How to choose a transmission mount

Stiffness is only one of several factors:

  • Stiffness and comfort: A stiff mount, e.g. in billet aluminium from Torque Solution, can give a more direct gear shift. On the other hand, it typically transmits more vibration and more noise into the cabin.
  • Type: Some cars use a pendulum mount – a rod that limits the drivetrain's rocking back and forth – instead of or together with a conventional mount.
  • Gearbox: Certain mounts only fit manual gearboxes, e.g. PERRIN's mount for the Subaru WRX/STI.
  • Complete mount or reinforcement: A bolt-on collar such as Cusco's for the rear mount on the Subaru BRZ, among others, can limit movement without you replacing the entire mount.

Fitment and installation

Fitment depends on car model, model year and gearbox, so always check the specific part number against your car. In this category you will also find brands such as APR, Fabtech, OMIX and Innovative Mounts. During installation the gearbox must be supported, and the bolts must be tightened to the specified torque. Also inspect the other bushings and mounts, as wear elsewhere can cause similar symptoms.

Frequently asked questions

How can I tell that the transmission mount is worn?

Typical signs are knocking or jolts when pulling away and when getting on or off the throttle, movement in the gear lever and increased vibration. Cracks or detached rubber in the mount can also indicate wear. However, noises can have several causes, so it is a good idea to have them checked.

Does a stiff transmission mount cause more noise in the cabin?

It can. The less the mount dampens, the more vibration is typically transmitted to the body, especially at idle. How much you notice depends on the material, design and car. It also depends on whether the engine mounts are stiffer.

Should I replace the engine mounts at the same time?

It is not necessarily a requirement. It can make sense if the engine mounts are also worn, because the engine and gearbox move as one unit. Consider the balance between the mounts, as a stiff transmission mount combined with soft engine mounts can distribute the load differently.

View as Grid List
Sort by
Display per page