0

UTV Mirrors

How much can you actually see behind you when you're sitting in a UTV wearing a helmet and strapped into your harness? Here you'll find rear view mirrors and side mirrors that clamp onto the roll cage tubes, giving you an overview of traffic, your trailer and the rest of the group without turning your whole body.

Centre rear view mirror or side mirrors

The mirrors here fall into two groups. A car-style rear view mirror, e.g. Seizmik Rearview Auto Style with steel clamp, is typically mounted centrally on a cross tube and shows what is happening behind the vehicle. Side mirrors such as Halo R and Halo-RA are mounted on the tubes at the sides and give you a view along the vehicle. They are available individually or in pairs, and some variants, e.g. Halo LED and Halo-RA LED, have built-in lights. The types can be combined if the roll cage has room. The mirrors in this category come from Seizmik.

How to choose a mirror for your UTV

Fitment is determined by more than just the size of the mirror:

  • Tube diameter: the clamps come in 1.625, 1.75 and 2 inches (approx. 41, 44 and 51 mm). Measure the tube where the mirror will sit – the wrong clamp can cause vibration or make the mirror rotate.
  • Make and model year: the product names specify e.g. Polaris, Can Am, Honda, Kawasaki, Kubota, Yamaha and CF Moto with model years, and the Pro-fit clamps are designed for specific roll cages.
  • Construction: the clamp material, mirror housing and mounting can affect how steady the image stays on rough terrain.
  • Placement: check that the mirror clears doors, roof and nets, and that it can be adjusted so you can see past passengers and cargo.

Installation, maintenance and approval

The clamps are typically tightened around the tube with bolts. Tighten evenly and re-tighten after the first few rides, as vibrations can loosen them. Rinse off dust and mud with water before wiping the glass with a soft cloth so the surface doesn't get scratched. Whether a mirror may be used on the road depends on the product and vehicle, so check the E-mark for the specific part number. You'll find more parts for the cab under interior and accessories, and for loose items in the cab, take a look at holders and storage.

Frequently asked questions

How do I measure the right clamp size?

Measure the outside diameter of the tube with a caliper where the mirror will sit. Compare with the clamp sizes of 1.625, 1.75 and 2 inches, and also check whether the product name mentions your vehicle make and model year.

Can the mirrors be used on public roads?

That depends on the product and the vehicle. Check the E-mark and the requirements that apply to your vehicle for the specific part number. Pay particular attention with LED variants, as lights may also be subject to regulations.

Why does the image in the mirror shake while driving?

Vibration can be caused by a clamp that doesn't match the tube diameter, loose bolts or an unfortunate placement. Check the size, re-tighten evenly and, if possible, choose a mounting point where the roll cage itself vibrates less.

View as Grid List
Sort by
Display per page