Exhaust Hangers
A rattle from the underbody or an exhaust hanging crooked can be caused by worn hangers. Here we gather rubber hangers, isolators and brackets that keep the exhaust in place and dampen vibrations. They are for you if you are repairing an original system or fitting a new one.
What does an exhaust hanger do?
The hangers carry the exhaust system under the car and let it move slightly with the engine. The rubber dampens vibrations so they are not transferred as directly to the body, and it can relieve stress on joints and pipes. If the rubber becomes hard, cracked or stretched, the system can hang lower, knock against the underbody or put more strain on the joints. This category belongs under exhaust hangers and brackets.
How to choose the right hanger
- Pin diameter: the holes must match the pins on the car and the system – for example, Kartboy hangers are available in both 12 and 15 mm.
- Length: a long hanger changes how high the system hangs and how much it can move.
- Thickness and stiffness: a heavier-duty hanger can hold the system more steadily, but can also transfer more vibrations into the cabin.
- Vehicle-specific or universal: vehicle-specific hangers are made for particular models, while universal ones, for example from OMIX, require you to check dimensions and placement yourself.
The category also includes parts from Magnaflow, Ticon and Stainless Bros. Always check dimensions and fitment for the specific part number.
Installation and maintenance
After installation, check that the pipes do not touch the underbody, tank or heat shield, and that the system can move freely with the engine. Look for cracks and dried-out rubber whenever the car is lifted anyway. If the system sits in rubber blocks rather than on pins, see our exhaust rubber mounts.
Frequently asked questions
How can I tell that an exhaust hanger is worn?
Typical signs are rattling or knocking from the underbody, an exhaust that hangs lower than before, or rubber with cracks and dried-out surfaces. Also check whether the system has left marks on the underbody.
What do 12 mm and 15 mm mean on a hanger?
The measurement typically indicates the diameter of the holes for the pins. It must match the pins on both the car and the system, otherwise the hanger can sit loosely or be difficult to fit.
Do exhaust hangers matter at the vehicle inspection?
The exhaust must be securely fastened and must not hang loose. Whether a modification to the exhaust is legal depends on the product and the car, so check the requirements and any approval for the specific part number.