0

Switch Panels

Do you need a permanent place for the switches for auxiliary lights, pumps or other equipment you have added to your car? A switch panel gathers the switches in one place within reach, so wires and switches are not left hanging loose. This category is for you if you want a clear overview of the controls in your project.

What the switch panels do

A switch panel gives the switches a fixed position, so you can operate your accessories without searching for loose switches. The category contains three types. From Nitrous Express there are panels that fit gauge pods for 2-1/16" (approx. 52 mm) gauges, as well as a vehicle-specific panel for the Chevrolet Corvette C6, model years 05-13. From Rugged Ridge there are switch pods with room for four switches on the A-pillar of left-hand drive Jeep Wrangler JK models, in black or etched finish and either as a pod or as a kit.

How to choose a switch panel

The right panel depends on several factors:

  • Location: Should the switches sit in an existing gauge pod, on the A-pillar or in a vehicle-specific panel? If something needs to go directly on the dashboard, dash panels and dashboard mounts may also be relevant.
  • Number of switches: Count the equipment you want to control now, and consider whether your project is likely to grow.
  • Fitment: Check the model year and driving side. Rugged Ridge pods, for example, come in separate versions for 07-10 and 11-18.
  • Switches and wiring: The switches must fit the panel's holes, and high-draw loads are typically connected via a relay and fuse – what is required depends on the switch and the load.

You can find more parts for the cabin under dashboard accessories.

Frequently asked questions

Does an A-pillar pod fit all model years of the Jeep Wrangler JK?

No, not necessarily. Rugged Ridge pods come in separate versions for model years 07-10 and 11-18, and they are for left-hand drive vehicles. Check the model year and driving side for the specific part number before you order.

Do the switches in the panel need to be connected via a relay?

It depends on the switch and the power draw. For high-draw loads such as auxiliary lights or pumps, a relay is typically used so the switch only controls a small current, and each circuit should have a suitable fuse.

Can a switch panel cause problems at the vehicle inspection?

It depends on the product, the car and the installation. Make sure the panel does not obstruct visibility or interfere with airbags, and check the requirements for the specific part number and your car before installing.

View as Grid List
Sort by
Display per page

Switch Panel - 15792

nex15792
Nitrous Express Gauge Pod Switch Panel (For 2-1/16in Gauge Pods)
$1,376.33 excl. VAT

Switch Panel - 15777

nex15777
Nitrous Express 05-13 Chevrolet Corvette C6 Custom Switch Panel
$717.66 excl. VAT