Lug Bolts
Is your wheel held on with bolts that screw directly into the hub? Then lug bolts are what you need. We have bolts in several thread sizes, lengths and seat types for you if you are changing wheels, fitting spacers or replacing worn bolts.
How to choose the right lug bolts
Three measurements must match: thread, seat type and length. The thread must fit the hub, and in this category we have, for example, M12 x 1.5, M14 x 1.5 and M14 x 1.25. The seat – the surface where the bolt meets the wheel – must match the wheel's bolt holes. Typically it is either a 60-degree conical seat or a ball (radius) seat. With the wrong seat, the contact area becomes smaller and the bolt can come loose. Also check the wrench size, e.g. 17 mm, and that the bolt head fits down into the wheel's holes. Bolts from Eibach are available with both conical and ball seats, for example, and Wheel Mate offers a set of 20 bolts with a 60-degree conical seat.
Length and spacers
If you fit spacers, the bolts need to be longer so there is sufficient thread engagement in the hub. That is why we have spacer bolts in, for example, 43, 48 and 64 mm. The right length depends on the spacer thickness, the wheel's material thickness and the hub. A bolt that is too long can hit parts behind the hub, and a bolt that is too short does not engage enough thread. Whether a combination of wheels, spacers and bolts is road legal depends on the product and the car, so check it for the specific part number. In addition to Eibach and Wheel Mate, we have bolts from H&R, Project Kics and McGard, among others.
Fitting, lug nuts and locks
Tighten the bolts in a crosswise pattern with a torque wrench to the car manufacturer's tightening torque, and check them again after the first few kilometres. If your car has fixed studs in the hub, you should use lug nuts on wheel studs instead. If you want to protect your wheels against theft, you can replace one bolt per wheel with wheel locks.
Frequently asked questions
Can I use lug bolts with a conical seat on wheels with a ball seat?
No, the bolt's seat must match the wheel's bolt holes. With the wrong seat, the contact area becomes small, so the bolt can come loose and damage the wheel. Check the wheel manufacturer's information before choosing bolts.
How long should lug bolts be when using spacers?
Typically, the bolt needs to be longer by the thickness of the spacer, but it depends on the wheel and hub. Measure the current bolt, add the spacer thickness, and check that the bolt engages enough thread without hitting anything behind the hub.
Do lug bolts need re-torquing after fitting?
It is typically recommended to check the tightening torque after the first few kilometres of driving, especially after changing wheels or fitting spacers. Use the car manufacturer's torque, and only lubricate the thread if the manufacturer specifies it.