0

Suspension Tools

Missing camber or toe adjustment after lowering your car, or do you simply want to set up your suspension precisely in the garage? In this category we bring together tools for adjusting and disassembling the suspension – for you who work on your own project, and for workshops that carry out wheel alignment.

What the tools are used for

The category covers tools that make it easier to adjust and take apart suspension components. This can be, for example, a universal camber/caster tool such as SPC 8286 or SPC 45940 for adjusting camber and caster, and tie rod tools such as SPC 71999 for working on tie rods. Slot punches in 12 x 8 mm and 14 x 16 mm can typically be used to create elongated holes, giving room for adjustment where the original holes don't allow enough. For measuring the wheel angles themselves, see the subcategory wheel alignment tools.

How to choose suspension tools

Start with the job and the car. Some tools are universal, while others are made for specific car brands, e.g. SPC Performance BMW Rear Toe Adjustment Tool and MINI Rear Toe Adjustment Tool for adjusting rear toe. Also consider:

  • Whether the tool needs to adjust, measure or disassemble parts.
  • Whether the size fits, e.g. the hole size of the slot punch.
  • Whether you need both a left-hand and right-hand version – from SPC Performance, for example, there is both a RIGHT HAND TOOL and a LEFT HAND TOOL.
  • Whether you have the other equipment needed to work safely under the car.

Checking and maintenance

Once camber, caster or toe has been changed, the wheel angles should be checked afterwards, as one adjustment can affect the others. Whether modifications such as elongated holes are permitted depends on the car and parts, so check this before modifying original brackets. Keep the tools clean and dry, and check the punch's cutting edge for wear, as a dull edge can leave uneven edges. For the rest of the job, you'll find ramps and wheel chocks and hand tools in the adjacent categories.

Frequently asked questions

What is the difference between camber, caster and toe?

Camber is the inward or outward tilt of the wheel viewed from the front. Caster is the tilt of the steering axis viewed from the side. Toe indicates whether the wheels point slightly towards or away from each other viewed from above.

Can I adjust the suspension myself with these tools?

It depends on the job and your experience. The tools make adjustment easier, but we recommend having the wheel angles measured and checked after the work, so tyre wear and handling are not negatively affected.

When do you use a slot punch?

Typically when the original bolt holes don't allow enough adjustment, e.g. after lowering. The punch permanently modifies an original bracket, so first check whether the modification is permitted on your car.

Does the rear toe tool fit all cars?

No. The car-specific tools are made for particular brands, e.g. BMW and MINI. Check the product description for the specific part number before ordering.

View as Grid List
Sort by
Display per page

SPC 74920 14 x 16mm SLOT PUNCH

spc74920
SPC Performance 14x16mm Slot Punch Tool
$2,246.51 excl. VAT

SPC 74940 12 X 8mm SLOT PUNCH

spc74940
SPC Performance 12x8mm Slot Punch Tool
$2,009.77 excl. VAT

SPC 38620 CV JOINT TOOL

spc38620
SPC Performance CV JOINT TOOL
$276.45 excl. VAT

SPC 71959 TIE ROD TOOL

spc71959
SPC Performance TIE ROD TOOL
$267.07 excl. VAT

SPC 71969 TIE ROD TOOL

spc71969
SPC Performance TIE ROD TOOL
$267.07 excl. VAT

SPC 71979 TIE ROD TOOL

spc71979
SPC Performance TIE ROD TOOL
$268.28 excl. VAT

SPC 71989 TIE ROD TOOL

spc71989
SPC Performance TIE ROD TOOL
$289.23 excl. VAT

SPC 71999 TIE ROD TOOL

spc71999
SPC Performance TIE ROD TOOL
$278.79 excl. VAT

SPC 74930 12 X 14mm SLOT PUNCH

spc74930
SPC Performance 12x14mm Slot Punch Tool
$2,086.09 excl. VAT

SPC 77350 TIE ROD TOOL

spc77350
SPC Performance HEAVY DUTY TIE ROD TOOL
$816.35 excl. VAT