0

H-Pipes

Do you have two pipe runs under your car, one from each cylinder bank? H-pipes connect the two runs with a crossover tube and can affect both the sound and the pressure conditions in the exhaust. This category is for you if you have a V engine and want to replace the mid-pipe, for example when fitting new headers.

What does an H-pipe do?

An H-pipe is the mid-pipe between the exhaust manifold or headers and the rear section of the system. The crossover tube between the two runs lets the pressure pulses balance out, which typically gives a deeper and more rounded sound than two separate runs. How performance is affected depends on the engine, pipe diameter and the rest of the exhaust. If you are considering a different solution, you can compare with Y-pipes, which merge two pipes into one, or browse the full category of H-, X- and merge pipes.

How to choose an H-pipe

  • Catalytic converter: There are versions with and without catalytic converters, e.g. short H-pipes with catalytic converters from BBK. Approval must always be checked for the specific part number.
  • Headers: Some pipes require specific headers, e.g. long tube headers or a specific header series. The requirement is typically stated in the product name.
  • Pipe diameter: e.g. 2-1/2" or 3" x 2-3/4". A larger diameter does not automatically mean more power; it has to match the engine, power goals and the rest of the system.
  • Sound: Choose with or without a resonator, e.g. a resonated H-pipe from AWE Tuning or a resonator delete kit from Kooks Headers. Without a resonator, the sound typically gets louder and can cause drone.

Installation and fitment

The pipes are built for specific models and model years, e.g. Ford Mustang and Ford Raptor, so compare the model year, engine and requirements in the product name with your car. Check gaskets and hangers during installation, and re-tighten the joints after the first few drives, as they can settle. In this category you will also find mid-pipes from JBA.

Frequently asked questions

What is the difference between an H-pipe and an X-pipe?

Both connect two pipe runs. An H-pipe has a straight crossover tube, while an X-pipe brings the runs together in a cross. The difference is typically most noticeable in the sound, but depends on the rest of the system.

Will my car pass inspection with a new H-pipe?

That depends on the product and the car. An H-pipe without a catalytic converter is typically not legal for road use, and versions with a catalytic converter must also be checked for the specific part number, e.g. for E-mark approval, before inspection.

Do I need to replace the headers at the same time as the H-pipe?

That depends on the pipe. Some H-pipes are built for specific headers, e.g. long tube headers or a specific header series, and do not fit the stock manifold. The requirement is typically stated in the product name or description.

View as Grid List
Sort by
Display per page

3in. x 2-3/4in. Catted H-Pipe

ksh11413500
Kooks 11-14 Ford Mustang GT 5.0L 4V 3in x 2 3/4in OEM Cat H Pipe Kooks HDR Req
$11,452.96 excl. VAT

BBK Exhaust Pipes

bbk1465
BBK 2015-16 Mustang V6 Short Mid H Pipe With Converters (To Be Used With 1642 Series Headers)
$5,990.47 excl. VAT

BBK Exhaust Pipes

bbk1538
BBK 96-04 Mustang 4.6 GT / Cobra Short Mid H Pipe w Catalytic Converters 2-1/2 For Long Tube Headers
$6,378.86 excl. VAT

Mustang 5.0L OEM Resonator Delete H-Pipe

ksh11513500
Kooks Headers 15-26 Ford Mustang 5.0L OEM Resonator Delete H-Pipe Kit
$4,888.57 excl. VAT