Fuel System Plumbing Kits
Have the fuel lines from your tank become too small for your project, or does a new in-tank pump need to be connected safely? In this category, hoses, fittings and lines are combined into complete kits, so the supply from tank to engine fits together. The kits are for you if you don't want to piece the parts together yourself.
What a fuel kit consists of
A complete kit brings together the parts that carry fuel from pump to engine: hose, fittings and in some cases lines or a filter. The advantage is that sizes and connections are typically matched in advance. In this category you'll find, for example, hose kits from Russell, fuel hanger kits from Radium Engineering that connect the pump hanger in the tank to the car's fuel lines, and connecting lines from Industrial Injection for Dodge 5.9L and 6.7L. Fragola is also one of the brands in the category.
How to choose the right kit
- Fuel: The materials must be compatible with the fuel you use – especially with ethanol blends.
- Pressure and flow: Fuel injection typically runs at higher pressure than a carburettor, and the size must match the pump and your power target.
- Connections: Check fitting type and thread against the pump, filter and fuel rail.
- Filter: Several fuel hanger kits are available with a microglass or stainless steel filter; the choice depends on whether you want to replace or clean the element.
- Fitment: Model-specific kits, e.g. for Chevrolet Corvette and Cadillac CTS-V, only fit the listed model years.
If you're missing individual parts, you can add loose hose and tubing or extra fittings and plugs.
Installation and inspection
Relieve the pressure in the system before disassembly, work in a ventilated area, and tighten fittings according to the manufacturer's instructions. Route the hose away from sharp edges, moving parts and hot components such as the exhaust manifold. Check for leaks with the engine running and again after the first drives, and inspect hoses and filter regularly – a clogged filter can cause pressure loss.
Frequently asked questions
What is a fuel hanger plumbing kit?
It is a kit that connects the fuel pump hanger in the tank to the car's fuel lines. The Radium Engineering kits in this category are available with either a microglass or stainless steel filter, depending on the part number.
Can I use the kit with E85?
That depends on the hose and seals in the specific kit. Check the product description to see whether the materials are designed for ethanol blends before choosing a kit for an E85 project.
Do fuel hoses need approval for vehicle inspection?
That depends on the product and the car. At inspection, the main concern is whether the installation is leak-free, secured and routed safely away from heat. Check the requirements for your specific part number and your car before installing.
How often should the fuel filter be replaced or cleaned?
That depends on filter type, fuel cleanliness and driving pattern. A stainless steel filter element can typically be cleaned, while a microglass element is typically replaced. Follow the manufacturer's interval, and check the filter if the pressure drops.