Driveshaft Loops
What happens to the driveshaft if a U-joint breaks under full acceleration? Without a safety loop, the loose shaft can hammer the floor pan, hit fuel and brake lines or dig into the tarmac. The loops here are for you if you go drag racing or do track days, or have a project with significantly more power.
What a driveshaft safety loop does
A safety loop is a ring or hoop that is fitted around the driveshaft and attached to the underbody or a crossmember. During normal driving, the loop does not touch the shaft. It only catches the shaft if a U-joint, a flange or the tube itself fails. This can prevent the shaft from punching a hole in the floor, destroying lines and wiring or making the car unstable. The load on the shaft typically increases with power, grip and hard launches. That is why the loop naturally belongs with the rest of the safety equipment in the car.
How to choose the right loop
The loops are typically made for a specific car, and fitment depends on several factors:
- Car model and year: BMR Suspension, for example, offers loops for the Dodge Challenger, S197 Mustang and 6th generation Camaro.
- Transmission: some versions only fit cars with an automatic transmission, e.g. certain Challenger Hellcat/Demon models.
- Position: a front loop covers the front section of the shaft. Check whether your project or rulebook requires more than one loop.
- Finish: e.g. red or black hammertone. The colour does not affect function.
The category also includes brands such as UMI Performance and Moroso. Perrin Performance offers a Driveshaft Lockdown Kit for the Subaru WRX and STI. Check the product description for what the kit does and how it is installed.
Installation and inspection
The loop is typically bolted into existing holes or into new holes you drill yourself. This depends on the car and the product. Measure the clearance between the loop and the shaft with the car on its wheels, so the shaft can move freely as the suspension works. Re-torque bolts and brackets after the first few drives and at every inspection. Check the U-joints for play at the same time. If you drive on track, you should also look at harnesses and roll cages.
Frequently asked questions
Do the rules require a driveshaft safety loop?
It depends on the club, the racing class and the car's times or power. Read the current rulebook for your class before you race. Also check that the loop meets the requirements for position and mounting.
Does a safety loop affect the vehicle inspection?
It depends on the product and the car. Holes you drill in the underbody can matter. Check the requirements for the specific part number and your car before you fit the loop.
Can I install the loop myself?
Often yes, if you have a lift or safe axle stands and ordinary tools. Some loops require you to drill into the underbody. Follow the installation instructions and torque specifications for the specific product, and check the clearance afterwards.
Why does the loop rattle or touch the shaft?
This is typically caused by too little clearance, loose bolts or the loop having been measured while the car was lifted. Check the clearance with the car on its wheels, and re-torque the brackets. Also check the engine and transmission mounts for wear.
BMR Suspension - DSL017H
BMR Suspension - DSL017R
BMR Suspension - DSL019H
BMR Suspension - DSL019R
BMR Suspension - DSL110H
PERRIN 08-26 Subaru WRX / 08-21 STI Driveshaft Lockdown Kit
BMR 15-18 Dodge Challenger (Auto Trans) Hellcat/Demon Driveshaft Safety Loop - Black Hammertone
BMR Suspension - DSL009H
BMR Suspension - DSL010H
BMR Suspension - DSL015R
BMR Suspension - DSL018H
BMR Suspension - DSL018R
BMR Suspension - DSL110R
UMI- Driveshaft Loop
BMR 82-02 3rd Gen F-Body Weld-On Driveshaft Safety Loop (For XTA001/TPU001) - Bare
BMR 83-87 GM G-Body Driveshaft Safety Loop Front - Black Hammertone
BMR 83-87 GM G-Body Driveshaft Safety Loop Front - Red
BMR Suspension - DSL001H
BMR Suspension - DSL001R
BMR Suspension - DSL002H
BMR Suspension - DSL007H
- 1
- 2