Steering Bearing Kits
Does the steering notch in the centre position, or is there play when you rock the handlebars with the front wheels lifted? Then the steering stem bearings are typically worn. Our steering bearing kits replace them on e.g. Honda, Kawasaki and Yamaha and are for you who want precise and light steering again.
What the steering stem bearings do
The steering stem carries the front end and turns every time you steer. The bearings have to absorb shocks from the terrain while letting the steering turn freely. When they are worn, you can feel it as notching in the centre position, heavy steering or play. However, play can also be caused by worn tie rods or ball joints, so it is a good idea to check them at the same time.
How to choose a steering bearing kit
Fitment depends on model and year, so the kits are listed precisely, e.g. from Pivot Works for Honda TRX300 Fourtrax 93-00 or Yamaha YFM350 Raptor 04-09. In this category you will also find kits from TwinPower. Pay attention to:
- Model and year: the same model name can cover several years where the bearings are not necessarily the same.
- Complete kit or lower bearing: QuadBoss, for example, offers kits for the lower bearing only, if that is the end that is worn.
- Several models in one kit: some kits fit several models, e.g. Kawasaki KFX400 and several Suzuki models – check the part number against your specific vehicle.
Installation and maintenance
Replacement typically requires removing the steering stem, and the bearing races can be a tight fit. Grease the bearings according to the manufacturer's instructions, and check the torque after the first rides if the manual specifies it. If you ride a lot in water and mud, grease and seals can break down faster. Other steering parts can be found under steering components.
Frequently asked questions
How can I tell that the steering bearings are worn?
Typical signs are notching or uneven resistance when the steering is turned with the front wheels lifted, as well as play in the front end. Since worn tie rods and ball joints can cause similar symptoms, they should be checked at the same time.
Should I replace both the upper and lower bearing?
It depends on the wear. The bearings are exposed to the same load, so many replace both at once. However, a kit for the lower bearing only may be enough if the upper bearing is still in good condition.
Does installing steering bearings require special tools?
It depends on the model. The bearing races are typically pressed in and may require a puller or a drift to remove and install them without damage. Follow the vehicle's service manual for torque settings.