Inner Tubes
Is your tyre losing air overnight, or do you need to replace a punctured tube? This category brings together inner tubes in many sizes – from 27.5 x 2.0-2.4 to e.g. 140/90-16 – as well as rim tape and a mini compressor. It is aimed at you if you maintain tube-type wheels yourself.
Tube and rim tape work together
An inner tube holds the air in tyres that are not tubeless, and it must match both the tyre size and the valve hole in the rim. The rim tape sits at the bottom of the rim and protects the tube from sharp edges and, for example, spoke nipples. If the tape is worn or has shifted, it can cause repeated punctures, so it is a good idea to check it when you replace the tube. If you need to replace the tyre itself, you will find it among our tyres.
How to choose the right tube
- Size: Read the tyre sidewall and choose a tube whose range covers the tyre, e.g. 27.5 x 2.8-3.0 or 16X8X7. The designation depends on the tyre type.
- Valve: The code in the product name, e.g. TR6, TR13, Pv78 or Rv48, indicates the valve type. It must fit the hole in the rim and the space around it.
- Wall thickness: Some tubes state a thickness, e.g. 1.00 mm. It can affect weight and puncture resistance, but this depends on the product.
- Rim tape: Choose according to the rim diameter and width, e.g. 16in x 1-1/2in or 21in x 1in.
The category includes products from BikeMaster and Kenda.
Fitting and maintenance
Inflate the tube slightly before placing it in the tyre so it does not fold or get pinched between tyre and rim. Check the inside of the tyre for foreign objects, otherwise the puncture may happen again. Keep the tyre pressure as specified by the manufacturer – too low a pressure can increase the risk of pinch damage. You will find equipment for fitting and storage under tyre and wheel accessories, and the whole range is gathered under wheels and tyres.
Frequently asked questions
How do I find the right tube size?
The size is printed on the tyre sidewall, e.g. 140/90-16 or 16X6.5X8. Choose a tube with the same size, or one where the tyre size falls within the tube's stated range.
Can one tube fit several tyre widths?
Yes, many tubes state a range, e.g. 27.5 x 2.0-2.4. If the tyre falls outside the range, the tube can become too tight or fold, which increases the risk of a puncture.
Why does the new tube puncture again?
It is typically caused by a thorn or foreign object in the tyre, worn rim tape, a sharp edge in the rim or a tube that got pinched during fitting. Check the tyre and rim thoroughly.
What does the valve code in the product name mean?
Codes such as TR6, TR13, Pv78 and Rv48 indicate the valve type. Compare with your current tube and check that the valve fits the rim's valve hole and the space around it.