0

Carburetor Spacers

Does your new carburetor have a different flange than your intake manifold, or do you need a little more height between the carburetor and the manifold? Spacers and adapters can solve both. They are for you if you are fitting a different type of carburetor or want to adjust its position on your project.

What do spacers and adapters do?

A spacer sits between the carburetor and the intake manifold and raises the carburetor. Depending on material and design, it can reduce heat transfer from the manifold and change the airflow into it. An adapter lets you mount a carburetor with a different flange than the manifold is made for. You will find, for example, Edelbrock adapters for spread-bore, Thermo-Quad and 4500 flange, as well as from square-bore to Q-Jet. The category also includes parts from Moroso, Granatelli Motor Sports and Spectre.

How to choose the right spacer

  • Flange type: Each side must match the carburetor and the manifold respectively, e.g. square-bore, spread-bore or standard flange.
  • Height: E.g. 0.750" or 2". Check clearance for the hood and air filter.
  • Design: An open version or one with separate holes can affect the engine's characteristics differently.
  • Connections: The new height may require adjustment of the throttle linkage and fuel lines.

Installation and maintenance

Use new gaskets on both sides and bolts or studs that are long enough for the extra height. Tighten evenly in a crisscross pattern so the flange does not warp. Then check for vacuum leaks and assess whether idle and mixture need adjusting – this may require different jets.

Frequently asked questions

What is the difference between a spacer and an adapter?

A spacer raises the carburetor on the same flange type, while an adapter connects two different flange types, e.g. a square-bore carburetor and a Q-Jet manifold. Some adapters also add extra height, so check the dimensions.

Can a spacer change engine performance?

It can, but the effect depends on height, design, manifold and engine. The change can typically be felt as a shift in torque in certain rpm ranges. See it as a fine-tuning rather than a guaranteed power gain.

Does the carburetor need adjusting after installation?

You should often check idle, mixture and throttle linkage, because the carburetor's position and the airflow change. How much needs adjusting depends on the engine and on how big the change is.

View as Grid List
Sort by
Display per page

CARBURETOR ADAPTER

ede1106
Edelbrock Carb Adapter Allows Rochester 4 Jet to Square-Bore Fit
1.286,81 € excl. VAT

CARBURETOR ADAPTER

ede2731
Edelbrock Spread-Bore Carb Plate
236,94 € excl. VAT

CARBURETOR ADAPTER

ede2693
Edelbrock Victor Q-Jet Adapter
745,91 € excl. VAT