0

Carburetors

How many CFM does your engine really need? This category brings together complete 4-barrel carburetors from 500 to 950 CFM, e.g. from Edelbrock, for you who want to replace a worn carburetor or match the fuel delivery to a new project.

How to choose the right CFM size

CFM indicates how much air the carburetor can flow. The requirement depends on the engine's displacement, the rpm it needs to perform at and how efficiently it fills the cylinders. A carburetor that is too large can cause sluggish response and an imprecise mixture at low rpm, while one that is too small can limit power at high rpm. The models range, for example, from the Edelbrock AVS2 500 CFM through the Performer 600 CFM and Thunder AVS 650 CFM to the VRS-4150 at 950 CFM.

Choke, version and application

  • Choke: An electric choke requires a power supply, while a manual choke is typically operated via a cable.
  • EGR: Models marked Non-EGR have no connection for exhaust gas recirculation, so check whether your engine uses EGR.
  • Marine: Marine versions are typically intended for boat engines, so don't choose based on CFM alone.
  • Remanufactured: A remanufactured carburetor, e.g. the Reman Edelbrock Performer 800 CFM, is an alternative to a new one.

Installation and tuning

Check the flange pattern and space under the hood before you order. With carburetor spacers you can change the height and airflow toward the intake, and the throttle linkage must match your throttle cable setup. The mixture is typically fine-tuned with jets, and in case of wear a rebuild kit can restore function. Whether the replacement requires an inspection or approval depends on the car and the product, so check this for the specific part number.

Frequently asked questions

What is the difference between an electric and a manual choke?

An electric choke opens gradually by itself as it warms up and requires an ignition-switched power supply. You operate a manual choke yourself via a cable, which gives direct control, but you have to remember to turn it off.

Why does the engine run rough after changing the carburetor?

It can be caused by incorrect idle and mixture adjustment, leaks at the flange or a carburetor size that doesn't suit the engine. Typically the idle, accelerator pump and jets need to be adjusted before the engine runs smoothly.

Does a new carburetor need to be approved for road use?

That depends on the car, its registration and the specific carburetor. Check for the individual part number whether an inspection or other approval is required before you fit it to a registered car.

View as Grid List
Sort by
Display per page

VRS-4150 Carb 650 CFM #1306

ede1306
Edelbrock VRS-4150 Carburetor 650 CFM 4-Circuit STD Booster - STD Finish
7.403,06 € excl. VAT

VRS-4150 Carb 750 CFM #1307

ede1307
Edelbrock VRS-4150 Carburetor 750 CFM 4-Circuit Annular Booster - STD Finish
7.838,69 € excl. VAT

VRS-4150 Carb 850 CFM #1308

ede1308
Edelbrock VRS-4150 Carburetor 850 CFM 4-Circuit Annular Booster - STD Finish
8.559,36 € excl. VAT