0

Chassis & Suspension

Does your car feel soft in corners, is there knocking from the front wheels over bumps, or does the steering wheel pull to one side after a modification? In this category we bring together parts for suspension, bushings and mounts, steering and chassis. They are for you if you want to restore worn handling, raise or lower your car, or build a project for the track or off-road.

What suspension, steering and chassis parts do

The running gear determines how the tyres keep contact with the road and how calmly the car reacts to bumps, braking and cornering. Among the suspension parts you will find, for example, ICON shock absorbers for Toyota Tundra, GM HD and Ford F-250/F-350, as well as coilover kits where spring and damper are combined in one unit. Bilstein and KYB are also among the brands in the category. Other parts affect geometry and stiffness, such as ICON's adjustable track bar, camber bolts for wheel alignment or the QA1 Transmission X-Brace, a cross brace at the transmission. See also steering and chassis parts.

How to choose suspension

Start with the car and how you use it. For a pickup or off-road vehicle, the lift is crucial: the ICON shocks, for example, are divided by lift such as 0-1.5 or 4.5 inches, and the wrong length can limit travel or put strain on the shock. For street cars and the track, it is more about damping, spring rate and adjustment. Weigh up several factors:

  • Use: daily driving, towing, off-road and track place different demands on comfort and control.
  • Ride height: a changed height may require a new wheel alignment, caster correction, e.g. with the Old Man Emu Caster Kit, or an adjustable track bar.
  • Adjustment: adjustable shocks allow fine-tuning, but it takes time to find the right setting.
  • The whole picture: new springs rarely give the desired result if the shocks or bushings are worn.

Bushings and mounts – material and fit

Bushings and mounts absorb movement between arms, axles and body. They are typically available in rubber or polyurethane. Polyurethane can give more precise steering, but can also transmit more vibration and noise. The category includes, for example, the Old Man Emu Bushing Kit and Rugged Ridge bushings for the track bar on the 1987-95 Jeep Wrangler YJ, and Superpro and Moog are also among the brands. Check model year, drivetrain and front or rear position, as many parts are specific. The ICON parts for F-250/F-350, for example, are divided by 4WD and lift.

Installation, wheel alignment and inspection

Suspension and steering parts directly affect safety, so installation requires the correct tools and the right tightening torques. Rubber bushings are often only fully tightened once the car is standing on its wheels at normal ride height. Have a wheel alignment carried out after the work. Whether the modification requires an inspection or approval depends on the product and the car. Therefore, check the documentation for the specific part number before you install.

Frequently asked questions

Should shock absorbers be replaced in pairs?

Shock absorbers are typically replaced in pairs on the same axle so that damping is equal on both sides. Uneven damping can cause the car to behave unevenly under braking and in corners.

When do polyurethane bushings make sense instead of rubber?

Polyurethane can be relevant if you prioritise precision and less movement in the arms, e.g. for the track or heavy loads. For pure comfort, rubber may be better, as polyurethane typically transmits more vibration and noise.

Does raising or lowering the car require an inspection?

It depends on the extent of the modification, the product and the car. Check the documentation for the specific part number and the applicable rules before you install. A changed ride height can also affect headlight alignment and wheel alignment.

What does a caster kit do?

A caster kit corrects the wheel's caster angle, which can change when the car is raised. Too little caster can result in unstable and light steering at higher speeds. The need depends on the car and how much it has been raised.

Chassis & Suspension
View as Grid List
Sort by
Display per page

UMI- 12 Bolt Rear Swap Control Arm Kit

umi301519-B
UMI Performance 78-88 GM G-Body 12-Bolt Swap Upper and Lower Control Arm Kit
4.840,15 € excl. VAT

UMI- 1-3/8” Tubular Rear Drag Sway Bar

umi4045-300-B
UMI Performance 64-72 GM A-Body 1-3/8in Tubular Rear Drag Sway Bar-Bolt-on
4.958,95 € excl. VAT

UMI- 1982-2002 F-Body Lower Control Arms

umi2015-R
UMI Performance 82-02 GM F-Body Tubular Non-Adjustable Lower Control Arms - Red
1.568,47 € excl. VAT

UMI- 2” Lowering Spring

umi4051R
UMI Performance 64-72 GM A-Body 78-88 G-Body 2in Lowering Spring Rear
2.074,26 € excl. VAT

UMI- 2015+ F-150 Front C/O Bracket Kit

umi656061
UMI Performance 15-24 Ford F-150 Coilover Bracket Kit - Front
2.468,41 € excl. VAT

UMI- 22mm Rear Sway Bar

umi1013-B
UMI Performance 05-14 Ford Mustang Rear Sway Bar- 22mm Solid CrMo
3.586,91 € excl. VAT

UMI- 22mm Rear Sway Bar

umi1013-R
UMI Performance 05-14 Ford Mustang Rear Sway Bar- 22mm Solid CrMo
3.586,91 € excl. VAT

UMI- 3 Position Adjustable Sway Bar

umi2534-R
UMI Performance 16-24 Chevrolet Camaro Suspension Stabilizer Bar - Red
3.173,73 € excl. VAT

UMI- 3 Position Adjustable Sway Bar

umi2534-B
UMI Performance 16-24 Chevrolet Camaro Suspension Stabilizer Bar - Black
3.173,73 € excl. VAT

UMI- 73‑88 A/G Rear Upper Arms Adj

umi3037-B
UMI Performance 73-77 GM A-Body 78-88 G-Body Rear Upper Control Arms Adjustable
2.667,64 € excl. VAT

UMI- 73‑88 A/G Rear Upper Arms Adj

umi3037-R
UMI Performance 73-77 GM A-Body 78-88 G-Body Rear Upper Control Arms Adjustable
2.667,64 € excl. VAT

UMI- 78-88 SBC Poly Mts

umi90071
UMI Performance 78-88 GM G-Body SBC Poly Engine Mount Kit
1.100,19 € excl. VAT

UMI 78-96 GM B-Body Front Sway Bar 1-1/8

umi3668-R
UMI Performance 65-70 Chevy B-Body Front Sway Bar Solid - 1-1/8 - Red
3.799,89 € excl. VAT

UMI 78-96 GM B-Body Front Sway Bar 1-1/8

umi3668-B
UMI Performance 65-70 Chevy B-Body Front Sway Bar Solid - 1-1/8 - Black
3.799,89 € excl. VAT

UMI- A-Arm Kit

umi643546-R
UMI Performance 73-87 GM C10 CornerMax A-Arm Kit - Red
14.631,48 € excl. VAT

UMI- A-Arm Kit

umi643546-B
UMI Performance 73-87 GM C10 CornerMax A-Arm Kit - Black
14.631,48 € excl. VAT

UMI- A-Arm Kit

umi643233-B
UMI Performance 73-87 GM C10 Street Performance A-Arm Kit - Black
11.243,44 € excl. VAT

UMI- A-Arm Kit

umi403133-R
UMI Performance 64-72 GM A-Body Tubular Upper & Lower Front A-Arm Kit
11.037,90 € excl. VAT

UMI- A-Arm Kit

umi643233-R
UMI Performance 73-87 GM C10 Street Performance A-Arm Kit - Red
11.243,44 € excl. VAT

UMI- A-Arm Kit

umi403133-B
UMI Performance 64-72 GM A-Body Tubular Upper & Lower Front A-Arm Kit - Black
11.376,72 € excl. VAT