0

Chassis & Suspension

Does your car feel soft in corners, is there knocking from the front wheels over bumps, or does the steering wheel pull to one side after a modification? In this category we bring together parts for suspension, bushings and mounts, steering and chassis. They are for you if you want to restore worn handling, raise or lower your car, or build a project for the track or off-road.

What suspension, steering and chassis parts do

The running gear determines how the tyres keep contact with the road and how calmly the car reacts to bumps, braking and cornering. Among the suspension parts you will find, for example, ICON shock absorbers for Toyota Tundra, GM HD and Ford F-250/F-350, as well as coilover kits where spring and damper are combined in one unit. Bilstein and KYB are also among the brands in the category. Other parts affect geometry and stiffness, such as ICON's adjustable track bar, camber bolts for wheel alignment or the QA1 Transmission X-Brace, a cross brace at the transmission. See also steering and chassis parts.

How to choose suspension

Start with the car and how you use it. For a pickup or off-road vehicle, the lift is crucial: the ICON shocks, for example, are divided by lift such as 0-1.5 or 4.5 inches, and the wrong length can limit travel or put strain on the shock. For street cars and the track, it is more about damping, spring rate and adjustment. Weigh up several factors:

  • Use: daily driving, towing, off-road and track place different demands on comfort and control.
  • Ride height: a changed height may require a new wheel alignment, caster correction, e.g. with the Old Man Emu Caster Kit, or an adjustable track bar.
  • Adjustment: adjustable shocks allow fine-tuning, but it takes time to find the right setting.
  • The whole picture: new springs rarely give the desired result if the shocks or bushings are worn.

Bushings and mounts – material and fit

Bushings and mounts absorb movement between arms, axles and body. They are typically available in rubber or polyurethane. Polyurethane can give more precise steering, but can also transmit more vibration and noise. The category includes, for example, the Old Man Emu Bushing Kit and Rugged Ridge bushings for the track bar on the 1987-95 Jeep Wrangler YJ, and Superpro and Moog are also among the brands. Check model year, drivetrain and front or rear position, as many parts are specific. The ICON parts for F-250/F-350, for example, are divided by 4WD and lift.

Installation, wheel alignment and inspection

Suspension and steering parts directly affect safety, so installation requires the correct tools and the right tightening torques. Rubber bushings are often only fully tightened once the car is standing on its wheels at normal ride height. Have a wheel alignment carried out after the work. Whether the modification requires an inspection or approval depends on the product and the car. Therefore, check the documentation for the specific part number before you install.

Frequently asked questions

Should shock absorbers be replaced in pairs?

Shock absorbers are typically replaced in pairs on the same axle so that damping is equal on both sides. Uneven damping can cause the car to behave unevenly under braking and in corners.

When do polyurethane bushings make sense instead of rubber?

Polyurethane can be relevant if you prioritise precision and less movement in the arms, e.g. for the track or heavy loads. For pure comfort, rubber may be better, as polyurethane typically transmits more vibration and noise.

Does raising or lowering the car require an inspection?

It depends on the extent of the modification, the product and the car. Check the documentation for the specific part number and the applicable rules before you install. A changed ride height can also affect headlight alignment and wheel alignment.

What does a caster kit do?

A caster kit corrects the wheel's caster angle, which can change when the car is raised. Too little caster can result in unstable and light steering at higher speeds. The need depends on the car and how much it has been raised.

Chassis & Suspension
View as Grid List
Sort by
Display per page

Ford Mustang Convertible

hrs51658-77
H&R 94-04 Ford Mustang Convertible V8 Super Sport Spring
$4,482.31 excl. VAT

Ford Mustang SN95 Sport; '94-04; R; B6

bil24-064187
Bilstein 5100 Series 94-04 Ford Mustang All (Exc 99-04 Cobra) Rear 46mm Monotube Shock Absorber
$1,315.47 excl. VAT

Ford Mustang SN95;F;B6

bil35-041382
Bilstein B6 87-04 Ford Mustang V8 Front 36mm Monotube Strut Assembly
$2,482.45 excl. VAT

Ford Mustang VI;F;B6

bil35-253600
Bilstein B6 15-17 Ford Mustang GT V6 Front Monotube Strut Assembly
$3,188.12 excl. VAT

Ford Mustang VI;R;B6

bil24-253611
Bilstein B6 Performance 15-17 Ford Mustang GT V8 Rear Monotube Shock
$1,678.69 excl. VAT

Ford Mustang;R;B6

bil24-122245
Bilstein B6 05-12 Ford Mustang All Rear 46mm Monotube Shock Absorber
$1,314.67 excl. VAT

Ford Ranger '19+; R; B8 5160; 0-2" lift

bil25-316940
Bilstein 5160 Series 19-22 Ford Ranger Rear Shock Absorber (0-2in Lift Height)
$2,554.76 excl. VAT

FORD RANGER 4WD Rear

bil24-188258
Bilstein 4600 Series 98-11 Ford Ranger Rear 46mm Monotube Shock Absorber
$1,083.02 excl. VAT

Ford Ranger 4WD/2WD; '19+; R; B8 5100

bil24-294225
Bilstein 5100 Series 19-20 Ford Ranger Rear 46mm Monotube Shock Absorber (for 0-1in Rear Lift)
$1,091.05 excl. VAT

Ford Ranger 4WD; '83-97; F; B8 5100; 4"

bil24-185493
Bilstein 5100 Series 1984 Ford Bronco II Base Front 46mm Monotube Shock Absorber
$1,085.16 excl. VAT

Ford Ranger 4WD; '83-97; F; B8 5100; 6"

bil24-185684
Bilstein 5100 Series 1983 Ford Ranger Base Standard Cab Pickup Front 46mm Monotube Shock Absorber
$1,084.62 excl. VAT

Ford Ranger 4WD; '83-97; R; B8 5100; 4"

bil24-185509
Bilstein 5100 Series 1984 Ford Bronco II Base Rear 46mm Monotube Shock Absorber
$1,099.02 excl. VAT

Ford Ranger 4WD; '83-97; R; B8 5100; 6"

bil24-065276
Bilstein 5100 Series 1983 Ford F-150 Base 4WD Rear 46mm Monotube Shock Absorber
$1,104.37 excl. VAT

FORD RANGER 4WD; '98-11; F; B6 4600

bil24-188241
Bilstein B6 2009 Ford Ranger FX4 Front 46mm Monotube Shock Absorber
$1,063.13 excl. VAT

Ford Ranger; '98+; R; B6 4600

bil24-196277
Bilstein 4600 Series 90-11 Ford Ranger Rear 46mm Monotube Shock Absorber
$952.73 excl. VAT

Ford Ranger; '98-11; F; B8 5100; 6” lift

bil24-187107
Bilstein 5100 Series 1998 Ford Ranger Splash RWD Front 46mm Monotube Shock Absorber
$1,067.28 excl. VAT

Ford Taurus

hrs51626-2
H&R 10-19 Ford Taurus Limited/Taurus SE/Taurus SEL (2WD) V6 Sport Spring
$4,234.79 excl. VAT

Ford Taurus SHO

hrs51626
H&R 10-19 Ford Taurus SHO (AWD) V6 Turbo Sport Spring
$4,104.50 excl. VAT

Ford Tourneo Connect HA

bil19-242958
Bilstein B4 OE Replacement 14 Ford Transit Connect Rear Strut Assembly
$817.75 excl. VAT

Ford Transit 2013-;F; B6

bil22-249357
Bilstein B6 15-17 Ford Transit-150 / 250 / 350 / 350HD Front Twintube Strut Assembly
$1,542.31 excl. VAT

Ford Transit 2014 HA; B4

bil19-255576
Bilstein B4 OE Replacement 15-17 Ford Transit-250/Transit-350 Rear Twintube Shock Absorber
$781.67 excl. VAT

Ford Transit 2014 VA; B4

bil22-249333
Bilstein B4 OE Replacement 15-17 Ford Transit Front Twintube Strut Assembly
$1,279.99 excl. VAT

Ford Transit 4600 Serie;R;B6

bil24-265331
Bilstein B6 15-17 Ford Transit Rear Monotube Shock Absorber
$1,257.43 excl. VAT