0

Engines & Components

Is your engine stripped down on the bench, or do you just need new valve springs for the cylinder head? In this category we bring together engine parts for projects that demand more than the original parts can handle: pistons, connecting rods, crankshafts, camshafts, bearings, oiling systems and cylinder heads. The parts are aimed at you if you are building for higher boost, more revs or track use.

What the parts in the engine do

An engine consists of systems that have to work together. The rotating assembly – crankshaft, connecting rods and pistons – converts combustion pressure into torque, while the camshaft and valvetrain control when air flows in and out. Bearings and the oiling system keep the moving parts separated by an oil film, and the cylinder head has a major influence on how well the engine breathes. If you increase boost or revs, the load on every part rises, and the weakest link sets the limit. So plan the whole project before you buy individual parts, or take a look at a complete engine kit with rotating assembly.

How to choose pistons and connecting rods

The pistons must match the bore, stroke, rod length and the compression ratio you want. For high-boost engines, lower compression is typically chosen, often via a dish in the piston crown. Also look at the ring pack, wrist pin and any coating. The range includes, for example, Wiseco piston kits and ring sets as well as Manley piston kits for the Chrysler 6.4L Hemi, and JE Pistons and Eagle are also among the brands. The connecting rods must be able to withstand the increased load and have a length that suits the piston and crankshaft – especially in stroker projects where the stroke is changed.

Camshaft and valvetrain must match

A camshaft with more lift and longer duration can move the power band upwards, but the valve springs, retainers and valve locks must be able to keep up. Too little spring pressure can cause valve float at high revs, while unnecessarily high pressure can increase wear on the cam and lifters. So choose based on lift, spring pressure, piston-to-valve clearance and how the engine is used. COMP Cams, for example, offers a beehive spring kit with steel retainers for the Dodge 5.7L Hemi model years 03-08, designed for 0.600 inch lift.

Installation, tolerances and break-in

High-performance engine parts require precise installation. Bearing clearance, piston clearance and ring gap must be measured and adjusted according to the manufacturer's instructions, and the ring gap depends on factors such as bore and application. Check that the parts fit your specific engine and build, including bore, compression height and bearing dimensions. An upgraded oiling system can be relevant at high revs or for track use, where oil pressure can drop in hard corners. After assembly, the engine is typically broken in according to the manufacturer's instructions, and the first oil change is done early to remove wear particles.

Frequently asked questions

Do I need to change pistons if I increase boost?

It depends on the engine, the original pistons and how much the boost is increased. For bigger changes, lower-compression pistons are typically chosen, but the choice should be assessed together with connecting rods, fuel and engine management.

Should the camshaft and valve springs be replaced at the same time?

Often, yes. A camshaft with more lift or a more aggressive profile may require different springs, retainers and valve locks. Check the cam manufacturer's recommended spring pressure and the piston-to-valve clearance before you assemble the engine.

Can I assemble the engine myself with the new parts?

It requires experience, precise measuring tools and the manufacturer's specifications. Bearing clearance, ring gap and torque specs must be checked carefully. If you don't have the equipment, the safest option is to let an engine shop handle the assembly.

Engines & Components
View as Grid List
Sort by
Display per page

ESP 4340 Rod

eagCRS5945D3D
Eagle Dodge 03-05 2.4L Neon SRT4 Connecting Rods (Set of 4)
$501.36 excl. VAT

ESP 4340 Rod

eagCRS6300B3D
Eagle Chevrolet 6.300in Length 2.100in Journal Diameter H-Beam Connecting Rods (Set of 8)
$902.90 excl. VAT

ESP 4340 Rod

eagCRS6125O3D
Eagle Chevrolet LS H-Beam Connecting Rod (Set of 8)
$868.83 excl. VAT

ESP 4340 Rod

eagCRS5137S3D-1
Eagle Subaru EJ20 / EJ25 Connecting Rod (Single Rod)
$171.00 excl. VAT

ESP 4340 Rod

eagCRS4850TA3D
Eagle Toyota (2TC/3TC) H-Beam Connecting Rods (Set of 4)
$500.74 excl. VAT

ESP 4340 Rod

eagCRS6125O3DL19
Eagle Chevrolet LS H Beam Stroker Connecting Rods 6.125in Length (Set of 8)
$1,009.35 excl. VAT

ESP Bal Str & Strip Assy

eagB16002MA040
Eagle Ford 302 3.000in Crank 5.090in I-Beam Rods 4.040in Pistons 164 Tooth FP Balanced Assembly
$2,543.24 excl. VAT

ESP Bal Street Perf Assy

eagB15405E030
Eagle Chevy 350 Street & Strip Rotating Assembly 3.750in. Stroke 4.030in. Bore
$2,291.33 excl. VAT

ESP Cast Crank

eag104554250
Eagle Pontiac 455 4.250in Stroke Cast Crankshaft
$1,061.47 excl. VAT

ESP Connecting Rods

eagFSI6125O
Eagle Chevrolet LS 4340 I-Beam Connecting Rod 6.125in (Set of 8)
$666.71 excl. VAT

ESP Connecting Rods

eagSIR6135B
Eagle Chevrolet Big Block 5140 I-Beam Connecting Rod 6.135in w/ 7/16in ARP 8740 (Set of 8)
$590.16 excl. VAT

ESP Extreme Duty Single

eagCRS5984KXD-1
Eagle Honda K24 Extreme Duty Connecting Rod (Single)
$305.91 excl. VAT

ESP Extreme Duty Single

eagCRS5313B6XD-1
Eagle BMW M52/54 & S50/52 Extreme Duty (Single)
$305.91 excl. VAT

ESP Extreme Duty Single

eagCRS5430AXD-1
Eagle Honda B18C Extreme Duty Connecting Rod (Single)
$305.91 excl. VAT

ESP H-Beam Rod

eagCRS5669A3D
Eagle Audi 1.8L Connecting Rods (Set of 4)
$501.21 excl. VAT

ESP H-Beam Rod

eagCRS5680N3D-1
Eagle Nissan VQ35DE Engine H-Beam Connecting Rod (Single Rod)
$171.67 excl. VAT

ESP H-Beam Rod

eagCRS5751T3D
Eagle Toyota/Lexus UZFE V8 5.751 Inch H-Beam Connecting Rods (Set of 8)
$959.07 excl. VAT

ESP H-Beam Rod

eagCRS5630H3D-1
Eagle Honda H22 Engine H-Beam Connecting Rod (SINGLE ROD)
$171.15 excl. VAT

ESP H-Beam Rod

eagCRS5765C3D
Eagle Chevy 2.2L Ecotec Connecting Rods (Set of 4)
$500.97 excl. VAT

ESP H-Beam Rod

eagCRS5232S3D
Eagle Subaru EJ18/EJ20 4340 H-Beam Connecting Rods (Set of 4) (Rods Longer Than Stock)
$499.66 excl. VAT

ESP H-Beam Rod

eagCRS5571H3D
Eagle Honda/Acura H23/F22 Standard Forged 4340 H-Beam Connecting Rods (Set of 4)
$500.68 excl. VAT

ESP H-Beam Rod

eagCRS5630H3D
Eagle Honda H22 Engine Connecting Rods (Set of 4)
$500.63 excl. VAT

ESP H-Beam Rod

eagCRS6243H3D
Eagle Dodge 5.7/6.1L Hemi 6.243 Length 4340 Forged Steel Connecting Rods (Set of 8)
$909.97 excl. VAT

ESP H-Beam Rod

eagCRS6125SO3D
Eagle Dodge Stroker Hemi 6.125 Length 4340 Forged Steel Connecting Rods (Set of 8)
$909.58 excl. VAT