0

Engines & Components

Is your engine stripped down on the bench, or do you just need new valve springs for the cylinder head? In this category we bring together engine parts for projects that demand more than the original parts can handle: pistons, connecting rods, crankshafts, camshafts, bearings, oiling systems and cylinder heads. The parts are aimed at you if you are building for higher boost, more revs or track use.

What the parts in the engine do

An engine consists of systems that have to work together. The rotating assembly – crankshaft, connecting rods and pistons – converts combustion pressure into torque, while the camshaft and valvetrain control when air flows in and out. Bearings and the oiling system keep the moving parts separated by an oil film, and the cylinder head has a major influence on how well the engine breathes. If you increase boost or revs, the load on every part rises, and the weakest link sets the limit. So plan the whole project before you buy individual parts, or take a look at a complete engine kit with rotating assembly.

How to choose pistons and connecting rods

The pistons must match the bore, stroke, rod length and the compression ratio you want. For high-boost engines, lower compression is typically chosen, often via a dish in the piston crown. Also look at the ring pack, wrist pin and any coating. The range includes, for example, Wiseco piston kits and ring sets as well as Manley piston kits for the Chrysler 6.4L Hemi, and JE Pistons and Eagle are also among the brands. The connecting rods must be able to withstand the increased load and have a length that suits the piston and crankshaft – especially in stroker projects where the stroke is changed.

Camshaft and valvetrain must match

A camshaft with more lift and longer duration can move the power band upwards, but the valve springs, retainers and valve locks must be able to keep up. Too little spring pressure can cause valve float at high revs, while unnecessarily high pressure can increase wear on the cam and lifters. So choose based on lift, spring pressure, piston-to-valve clearance and how the engine is used. COMP Cams, for example, offers a beehive spring kit with steel retainers for the Dodge 5.7L Hemi model years 03-08, designed for 0.600 inch lift.

Installation, tolerances and break-in

High-performance engine parts require precise installation. Bearing clearance, piston clearance and ring gap must be measured and adjusted according to the manufacturer's instructions, and the ring gap depends on factors such as bore and application. Check that the parts fit your specific engine and build, including bore, compression height and bearing dimensions. An upgraded oiling system can be relevant at high revs or for track use, where oil pressure can drop in hard corners. After assembly, the engine is typically broken in according to the manufacturer's instructions, and the first oil change is done early to remove wear particles.

Frequently asked questions

Do I need to change pistons if I increase boost?

It depends on the engine, the original pistons and how much the boost is increased. For bigger changes, lower-compression pistons are typically chosen, but the choice should be assessed together with connecting rods, fuel and engine management.

Should the camshaft and valve springs be replaced at the same time?

Often, yes. A camshaft with more lift or a more aggressive profile may require different springs, retainers and valve locks. Check the cam manufacturer's recommended spring pressure and the piston-to-valve clearance before you assemble the engine.

Can I assemble the engine myself with the new parts?

It requires experience, precise measuring tools and the manufacturer's specifications. Bearing clearance, ring gap and torque specs must be checked carefully. If you don't have the equipment, the safest option is to let an engine shop handle the assembly.

Engines & Components
View as Grid List
Sort by
Display per page

Mishimoto MMOFC-LSX-HOONRD

misMMOFC-LSX-HOONRD
Mishimoto LS Engine Hoonigan Oil Filler Cap - Red
$98.48 excl. VAT

Mishimoto MMOFC-MAZ-BK

misMMOFC-MAZ-BK
Mishimoto Mazda Oil Filler Cap - Black
$78.35 excl. VAT

Mishimoto MMOFC-MITS-BK

misMMOFC-MITS-BK
Mishimoto Mitsubishi Oil Filler Cap - Black
$78.37 excl. VAT

Mishimoto MMOFC-MITS-RD

misMMOFC-MITS-RD
Mishimoto Mitsubishi Oil Filler Cap - Red
$78.41 excl. VAT

Mishimoto MMOFC-MUS1-BK

misMMOFC-MUS1-BK
Mishimoto 87-01 Ford Mustang Oil Filler Cap - Black
$79.23 excl. VAT

Mishimoto MMOFC-SUB-BK

misMMOFC-SUB-BK
Mishimoto Subaru Oil FIller Cap - Black
$78.38 excl. VAT

Mishimoto MMOFC-SUB-HOONRD

misMMOFC-SUB-HOONRD
Mishimoto Subaru Hoonigan Oil Filler Cap - Red
$94.56 excl. VAT

Mishimoto MMOFC-TOY-RD

misMMOFC-TOY-RD
Mishimoto Toyota Oil Filler Cap - Red
$79.23 excl. VAT

Mit 4B11 EVO X 2008+, 86mm Bore, -8cc,

wisK698M86
Wiseco Mitsubishi EVO X 4B11 Turbo -8cc 86mm Bore 8.8 CR HD Forged Piston Kit
$1,007.03 excl. VAT

Mit 4G93/94, 82mm Bore, -2.5cc, 1.190CH

wisK683M82AP
Wiseco 97-02 Mitsubishi Lancer 4G93/4G94 1.8L 82.0mm Bore .040 Size -2.5cc FT 1.190CH 8.9 Piston Kit
$996.51 excl. VAT

MITS 3000 TURBO -14cc 1.250 X 91.5

wisK570M915
Wiseco Mits 3000 Turbo -14cc 1.250 X 91.5 Piston Shelf Stock Kit
$1,188.10 excl. VAT

MITS 3000 TURBO -14cc 1.250 X 92MM

wisK570M92
Wiseco Mits 3000 Turbo -14cc 1.250 X 92MM Piston Shelf Stock Kit
$1,188.20 excl. VAT

MITS TURBO DISH -10cc 1.378 X 85.5

wisK560M855
Wiseco Mits Turbo DISH -10cc 1.378 X 85.5 Piston Shelf Stock Kit
$881.05 excl. VAT

MITS TURBO DISH -10cc 1.378 X 86.0

wisK597M86
Wiseco Mits Turbo DISH -10cc 1.378 X 86.0 Piston Shelf Stock Kit
$898.30 excl. VAT

Mitsu 4G64 w/4G63 Heads 10.5:1 E85

wisK656M85AP
Wiseco Mitsu 4G64 w/4G63 Heads 10.5:1 E85 Piston Kit
$1,148.42 excl. VAT

Mitsu 4G64 w/4G63 Heads 10.5:1 E85

wisK656M855AP
Wiseco Mitsu 4G64 w/4G63 Heads 10.5:1 E85 Piston Kit
$1,148.62 excl. VAT

Mitsu 4G64 w/4G63 Heads 10.5:1 E85

wisK656M86AP
Wiseco Mitsu 4G64 w/4G63 Heads 10.5:1 E85 Piston Kit
$1,148.37 excl. VAT

MITSU 85.5mm/1.130 CD/DISH

man607005C-4
Manley 90-94 Eclipse (6 Bolt 4G63T) 85.5mm +.5mm Oversized Bore 8.5:1 Dish Pistons w/ Rings
$959.95 excl. VAT

MITSU 85mm/1.248 CD/DISH E/D

man618200CE-4
Manley 93.5-99 Eclipse GST/GSX 4G63T 85mm Bore 10.0/10.5:1 Dish Piston Set with Rings
$1,126.69 excl. VAT

MITSU 85mm/1.375 CD/DISH

man606000C-4
Manley 03-06 Evo 8/9 (7 Bolt 4G63T) 85mm STD Bore 8.5:1 Dish Pistons w/ Rings
$956.46 excl. VAT

MITSU 86.5mm/1.155 CD/DISH T/T E/D

man624205CE-4
Manley 08+ Mitsubishi 4B11T 86.5mm (+.5mm) -11cc Dome 9.0:1 CR Turbo Tuff Series Piston Set w/ Rings
$1,354.72 excl. VAT

MITSU 86.5mm/1.313 CD/DISH

man614005C-4
Manley 08+ Mitsubishi Evo X (4B11T) 86.5mm +.5mm Oversize Bore 9.0:1 Dish Piston Set with Rings
$957.92 excl. VAT

MITSU 86.5mm/1.313 CD/DOME T/T E/D

man614305CE-4
Manley Mitsubishi 4B11 86.5mm Bore 10.0:1 CR +2cc Dome Turbo Tuff Piston Set w/ Rings
$1,354.72 excl. VAT

MITSU 86mm/1.375 CD/DISH

man605010C-4
Manley 90-94 Eclipse (6 Bolt 4G63T) 86mm +1mm Over Bore 8.5:1 Dish Piston Set w/ Rings
$959.95 excl. VAT