0

Engines & Components

Is your engine stripped down on the bench, or do you just need new valve springs for the cylinder head? In this category we bring together engine parts for projects that demand more than the original parts can handle: pistons, connecting rods, crankshafts, camshafts, bearings, oiling systems and cylinder heads. The parts are aimed at you if you are building for higher boost, more revs or track use.

What the parts in the engine do

An engine consists of systems that have to work together. The rotating assembly – crankshaft, connecting rods and pistons – converts combustion pressure into torque, while the camshaft and valvetrain control when air flows in and out. Bearings and the oiling system keep the moving parts separated by an oil film, and the cylinder head has a major influence on how well the engine breathes. If you increase boost or revs, the load on every part rises, and the weakest link sets the limit. So plan the whole project before you buy individual parts, or take a look at a complete engine kit with rotating assembly.

How to choose pistons and connecting rods

The pistons must match the bore, stroke, rod length and the compression ratio you want. For high-boost engines, lower compression is typically chosen, often via a dish in the piston crown. Also look at the ring pack, wrist pin and any coating. The range includes, for example, Wiseco piston kits and ring sets as well as Manley piston kits for the Chrysler 6.4L Hemi, and JE Pistons and Eagle are also among the brands. The connecting rods must be able to withstand the increased load and have a length that suits the piston and crankshaft – especially in stroker projects where the stroke is changed.

Camshaft and valvetrain must match

A camshaft with more lift and longer duration can move the power band upwards, but the valve springs, retainers and valve locks must be able to keep up. Too little spring pressure can cause valve float at high revs, while unnecessarily high pressure can increase wear on the cam and lifters. So choose based on lift, spring pressure, piston-to-valve clearance and how the engine is used. COMP Cams, for example, offers a beehive spring kit with steel retainers for the Dodge 5.7L Hemi model years 03-08, designed for 0.600 inch lift.

Installation, tolerances and break-in

High-performance engine parts require precise installation. Bearing clearance, piston clearance and ring gap must be measured and adjusted according to the manufacturer's instructions, and the ring gap depends on factors such as bore and application. Check that the parts fit your specific engine and build, including bore, compression height and bearing dimensions. An upgraded oiling system can be relevant at high revs or for track use, where oil pressure can drop in hard corners. After assembly, the engine is typically broken in according to the manufacturer's instructions, and the first oil change is done early to remove wear particles.

Frequently asked questions

Do I need to change pistons if I increase boost?

It depends on the engine, the original pistons and how much the boost is increased. For bigger changes, lower-compression pistons are typically chosen, but the choice should be assessed together with connecting rods, fuel and engine management.

Should the camshaft and valve springs be replaced at the same time?

Often, yes. A camshaft with more lift or a more aggressive profile may require different springs, retainers and valve locks. Check the cam manufacturer's recommended spring pressure and the piston-to-valve clearance before you assemble the engine.

Can I assemble the engine myself with the new parts?

It requires experience, precise measuring tools and the manufacturer's specifications. Bearing clearance, ring gap and torque specs must be checked carefully. If you don't have the equipment, the safest option is to let an engine shop handle the assembly.

Engines & Components
View as Grid List
Sort by
Display per page

Valve-FD MOD R/M 36mm

man11637-1
Manley Ford Racing Cylinder Head 4.6L & 5.4L SOHC 36.0mm Race Master Exhaust Valve (Single)
$43.95 excl. VAT

Valve-FD MOD R/M 37mm

man11616B-8
Manley Ford 4.6L/5.4L DOHC 4V 37mm Dia 5.339in Length Bead Loc Race Master Intake Valves (Set of 8)
$287.78 excl. VAT

Valve-FD MOD R/M 37mm

man11616-1
Manley Ford 4.6L DOHC (4 Valve) Triple Groove 37mm Race Master Intake Valves - Single
$47.13 excl. VAT

Valve-FD MOD R/M 37mm

man11639-1
Manley 99-12 Ford 4.6L/281 5.4L/330 V8 37mm Race Series Stainless Steel Intake Valve - Single
$58.00 excl. VAT

Valve-FD MOD R/M 37mm

man11639-8
Manley 99-12 Ford 4.6L/281 5.4L/330 V8 37mm Race Series Stainless Steel Intake Valves (Set of 8)
$287.78 excl. VAT

Valve-FD MOD R/M 37mm

man11639B-8
Manley Ford 4.6L/5.4L SOHC (2 Valve) 1999+ Bead Loc Groove 37mm Race Master Exhaust Valve - Set of 8
$287.78 excl. VAT

Valve-FD MOD R/M 38mm

man11618B-1
Manley VALVE-FD 4V R/M 38mm Bead Valve Lock (Single)
$44.70 excl. VAT

Valve-FD MOD R/M 38mm

man11618-8
Manley Ford 4.6L DOHC (4 Valve) Triple Groove 38mm Race Master Intake Valves
$282.41 excl. VAT

Valve-FD MOD R/M 38mm

man11618-1
Manley Ford 4.6L Modular V8 Race Series Intake Valve 5.339in Length 38mm Dia. (Single)
$43.95 excl. VAT

Valve-FD MOD R/M 38mm

man11618B-8
Manley VALVE-FD 4V R/M 38mm Bead Lock
$286.86 excl. VAT

Valve-FD MOD R/M 44.5mm

man11636-1
Manley Ford 4.6L & 5.4L SOHC 44.5mm Race Master Intake Valve (Single)
$43.95 excl. VAT

Valve-FD MOD R/M 44.5mm

man11634B-8
Manley Ford 4.6L Modular V8 intake Valve Kit - 44.50mm Head Dia. 4.630in O/A Length, 0.2750in Stem
$287.78 excl. VAT

Valve-FD MOD R/M 44.5mm

man11636-8
Manley Ford 4.6L & 5.4L SOHC 44.5mm Race Master Intake Valves *Set of 8*
$287.78 excl. VAT

Valve-FD MOD R/M 44.5mm

man11634-8
Manley Ford 4.6L Modular V8 intake Valve Kit - 44.50mm Head Dia. 4.630in O/A Length, 0.2750in Stem
$287.78 excl. VAT

Valve-FD MOD R/M 45.5mm

man11640B-8
Manley Ford 4.6L & 5.4L SOHC 45.5mm Race Master Intake Valves *Set of 8*
$287.78 excl. VAT

Valve-FD MOD R/M 45.5mm

man11640-8
Manley 99-12 Ford V8 4.6L/281 5.4/330 45.5mm Race Series Stainless Steel Intake Valves (Set of 8)
$287.78 excl. VAT

Valve-FD MOD R/M 46.83mm

man11638-8
Manley Ford 4.6L Modular V8 intake Valve Kit - 46.83mm Head Dia. 4.630in O/A Length, 0.2750in Stem
$287.78 excl. VAT

Valve-FD MOD R/M 46.83mm

man11638B-8
Manley Ford 4.6L Modular V8 intake Valve Kit - 46.83mm Head Dia. 4.630in O/A Length, 0.2750in Stem
$287.78 excl. VAT

Valve-FD SVO 1.880

man11591-8
Manley Big Block Ford 429-460 1.880in Diameter 5.655in Length Race Master Exhaust Valves (Set of 8)
$269.10 excl. VAT

Valve-FD SVO 2.250

man11586-8
Manley Ford 429intake Valve Kit - 2.250in Head Dia. 5.725in O/A Length, 0.3415in Stem
$434.55 excl. VAT

Valve-FD SVO 2.300

man11588-8
Manley Ford 429intake Valve Kit - 2.300in Head Dia. 5.725in O/A Length, 0.3415in Stem
$434.55 excl. VAT

Valve-FD/BB 1.760,+.100

man11801-8
Manley Ford 429 Exhaust Valve Kit - 1.760in Head Dia. 5.167in O/A Length, 0.3415in Stem
$420.53 excl. VAT

Valve-HEMI 5.7 R/F 2.000

man11664-8
Manley Chrysler/Dodge 5.7L .6.1L Hemi Race Master Intake Valves (Set of 8)
$282.27 excl. VAT

Valve-HEMI 5.7 R/F 2.000 B/L

man11664B-8
Manley thru 08 Chevy Hemi 5.7L w/ Bead Loc Groove 2.000in Race Master Exhaust Valves (Set of 8)
$282.27 excl. VAT