0

Engines & Components

Is your engine stripped down on the bench, or do you just need new valve springs for the cylinder head? In this category we bring together engine parts for projects that demand more than the original parts can handle: pistons, connecting rods, crankshafts, camshafts, bearings, oiling systems and cylinder heads. The parts are aimed at you if you are building for higher boost, more revs or track use.

What the parts in the engine do

An engine consists of systems that have to work together. The rotating assembly – crankshaft, connecting rods and pistons – converts combustion pressure into torque, while the camshaft and valvetrain control when air flows in and out. Bearings and the oiling system keep the moving parts separated by an oil film, and the cylinder head has a major influence on how well the engine breathes. If you increase boost or revs, the load on every part rises, and the weakest link sets the limit. So plan the whole project before you buy individual parts, or take a look at a complete engine kit with rotating assembly.

How to choose pistons and connecting rods

The pistons must match the bore, stroke, rod length and the compression ratio you want. For high-boost engines, lower compression is typically chosen, often via a dish in the piston crown. Also look at the ring pack, wrist pin and any coating. The range includes, for example, Wiseco piston kits and ring sets as well as Manley piston kits for the Chrysler 6.4L Hemi, and JE Pistons and Eagle are also among the brands. The connecting rods must be able to withstand the increased load and have a length that suits the piston and crankshaft – especially in stroker projects where the stroke is changed.

Camshaft and valvetrain must match

A camshaft with more lift and longer duration can move the power band upwards, but the valve springs, retainers and valve locks must be able to keep up. Too little spring pressure can cause valve float at high revs, while unnecessarily high pressure can increase wear on the cam and lifters. So choose based on lift, spring pressure, piston-to-valve clearance and how the engine is used. COMP Cams, for example, offers a beehive spring kit with steel retainers for the Dodge 5.7L Hemi model years 03-08, designed for 0.600 inch lift.

Installation, tolerances and break-in

High-performance engine parts require precise installation. Bearing clearance, piston clearance and ring gap must be measured and adjusted according to the manufacturer's instructions, and the ring gap depends on factors such as bore and application. Check that the parts fit your specific engine and build, including bore, compression height and bearing dimensions. An upgraded oiling system can be relevant at high revs or for track use, where oil pressure can drop in hard corners. After assembly, the engine is typically broken in according to the manufacturer's instructions, and the first oil change is done early to remove wear particles.

Frequently asked questions

Do I need to change pistons if I increase boost?

It depends on the engine, the original pistons and how much the boost is increased. For bigger changes, lower-compression pistons are typically chosen, but the choice should be assessed together with connecting rods, fuel and engine management.

Should the camshaft and valve springs be replaced at the same time?

Often, yes. A camshaft with more lift or a more aggressive profile may require different springs, retainers and valve locks. Check the cam manufacturer's recommended spring pressure and the piston-to-valve clearance before you assemble the engine.

Can I assemble the engine myself with the new parts?

It requires experience, precise measuring tools and the manufacturer's specifications. Bearing clearance, ring gap and torque specs must be checked carefully. If you don't have the equipment, the safest option is to let an engine shop handle the assembly.

Engines & Components
View as Grid List
Sort by
Display per page

Valve-L-92 S/D 1.600

man12355-8
Manley Chevy Small Block LS3/L99 (L92 Head) 1.6in Head Dia. Severe Duty Exhaust Valves (Set of 8)
$418.25 excl. VAT

Valve-LS1 E/D 1.575

man11681-8
Manley Chevy LS-1/LS-2 4.923in Pro Flo/Extreme Duty Exhaust Valves (Set of 8)
$707.53 excl. VAT

Valve-LS1 E/D 1.600

man11683-8
Manley Chevy LS-1/LS-2 w LS-6 Head Small Block 1.600 Severe Duty/Pro Flo Intake Valves (Set of 8)
$707.53 excl. VAT

Valve-LS1 P/F 2.055

man11680-8
Manley Chevy LS-1 Small Block 2.055 Pro Flo Severe Duty Exhaust Valves (Set of 8)
$420.53 excl. VAT

Valve-LS1 P/F 2.055 HOLLOW

man11680H-8
Manley Chevrolet LS1intake Valve Kit - 2.055in Head Dia. 4.874in O/A Length, 0.3133in Stem
$950.21 excl. VAT

Valve-LS1 P/F 2.080

man11682-8
Manley Chevrolet LS1intake Valve Kit - 2.080in Head Dia. 4.874in O/A Length, 0.3133in Stem
$420.53 excl. VAT

Valve-LS1 P/F 2.080 HOLLOW

man11682H-8
Manley Chevy LS-1/LS-2 (LS-6) Head Small Block Severe Duty/Pro Flo Hollow Intake Valves (Set of 8)
$950.21 excl. VAT

Valve-LS1 P/F 2.100

man11684-8
Manley Chevy LS-1/L-2 Small Block 2.100 Severe Duty/Pro Flo Intake Valves (Set of 8)
$420.53 excl. VAT

Valve-LS1 P/F 2.100 HOLLOW

man11684H-8
Manley Chevrolet LS1intake Valve Kit - 2.100in Head Dia. 4.874in O/A Length, 0.3133in Stem
$950.21 excl. VAT

Valve-LS1 R/M 1.575

man11363-8
Manley Small Block Chevy LS-1 / LS-2 (LS-6 Head) 1.575 Head Diameter Race Flo Exhaust Valves
$269.10 excl. VAT

Valve-LS1 R/M 1.600

man11365-8
Manley Small Block Chevy LS-1 / LS-2 (LS-6 Head) 1.600 Head Diameter Race Flo Exhaust Valves
$269.10 excl. VAT

Valve-LS1 R/M 2.000 HOLLOW

man11360H-8
Manley Chevrolet LS1intake Valve Kit - 2.000in Head Dia. 4.874in O/A Length, 0.3133in Stem
$775.19 excl. VAT

Valve-LS1 R/M 2.020

man11362-8
Manley Small Block Chevy LS-1 / LS-2 (LS-6 Head) 2.020 Head Diameter Race Master Intake Valves
$269.10 excl. VAT

Valve-LS1 R/M 2.020 HOLLOW

man11362H-8
Manley Chevrolet LS1intake Valve Kit - 2.020in Head Dia. 4.874in O/A Length, 0.3133in Stem
$775.19 excl. VAT

Valve-LS1 R/M 2.055

man11390-8
Manley Small Block Chevy LS-1/LS-2 (LS-6 Head) Race Flo Intake Valves (Set of 8)
$269.10 excl. VAT

Valve-LS1 R/M 2.055 HOLLOW

man11390H-8
Manley Chevrolet LS1intake Valve Kit - 2.055in Head Dia. 4.874in O/A Length, 0.3133in Stem
$775.19 excl. VAT

Valve-LS1 R/M 2.080

man11398-8
Manley LS-1 / LS-2 (LS-6 Head) SBC Race Master SS Valves (Set of 8) Intake 2.08 Head Diameter
$265.50 excl. VAT

Valve-LS1 R/M 2.080 HOLLOW

man11398H-8
Manley Chevrolet LS1intake Valve Kit - 2.080in Head Dia. 4.874in O/A Length, 0.3133in Stem
$775.19 excl. VAT

Valve-LS1 R/M 2.100

man11350-8
Manley Small Block Chevy LS-1 / LS-2 (LS-6 Head) 2.100 Head Diameter Race Flo Intake Valves
$269.10 excl. VAT

Valve-LS1 R/M 2.100 HOLLOW

man11350H-8
Manley Chevrolet LS1intake Valve Kit - 2.100in Head Dia. 4.874in O/A Length, 0.3133in Stem
$775.19 excl. VAT

Valve-LS1 S/D 1.550

man11673-8
Manley Chevy LS-1, LS-2 Small Block 1.550 Pro Flo Severe Duty Exhaust Valves (Set of 8)
$420.53 excl. VAT

Valve-LS1 S/D 1.600

man11677-8
Manley Chevy LS-6 Head Small Block Severe Duty/Pro Flo Exhaust Valves (Set of 8)
$420.53 excl. VAT

Valve-LS7 E/D 1.615

man11687-8
Manley Chevy LS-7 Small Block 1.610in Dia Extreme Duty Exhaust Valves (Set of 8)
$707.53 excl. VAT

Valve-LS7 P/F 2.205

man11688-1
Manley LS7 2.205 Severe Duty Pro Flo Intake Valve
$62.87 excl. VAT