0

Engines & Components

Is your engine stripped down on the bench, or do you just need new valve springs for the cylinder head? In this category we bring together engine parts for projects that demand more than the original parts can handle: pistons, connecting rods, crankshafts, camshafts, bearings, oiling systems and cylinder heads. The parts are aimed at you if you are building for higher boost, more revs or track use.

What the parts in the engine do

An engine consists of systems that have to work together. The rotating assembly – crankshaft, connecting rods and pistons – converts combustion pressure into torque, while the camshaft and valvetrain control when air flows in and out. Bearings and the oiling system keep the moving parts separated by an oil film, and the cylinder head has a major influence on how well the engine breathes. If you increase boost or revs, the load on every part rises, and the weakest link sets the limit. So plan the whole project before you buy individual parts, or take a look at a complete engine kit with rotating assembly.

How to choose pistons and connecting rods

The pistons must match the bore, stroke, rod length and the compression ratio you want. For high-boost engines, lower compression is typically chosen, often via a dish in the piston crown. Also look at the ring pack, wrist pin and any coating. The range includes, for example, Wiseco piston kits and ring sets as well as Manley piston kits for the Chrysler 6.4L Hemi, and JE Pistons and Eagle are also among the brands. The connecting rods must be able to withstand the increased load and have a length that suits the piston and crankshaft – especially in stroker projects where the stroke is changed.

Camshaft and valvetrain must match

A camshaft with more lift and longer duration can move the power band upwards, but the valve springs, retainers and valve locks must be able to keep up. Too little spring pressure can cause valve float at high revs, while unnecessarily high pressure can increase wear on the cam and lifters. So choose based on lift, spring pressure, piston-to-valve clearance and how the engine is used. COMP Cams, for example, offers a beehive spring kit with steel retainers for the Dodge 5.7L Hemi model years 03-08, designed for 0.600 inch lift.

Installation, tolerances and break-in

High-performance engine parts require precise installation. Bearing clearance, piston clearance and ring gap must be measured and adjusted according to the manufacturer's instructions, and the ring gap depends on factors such as bore and application. Check that the parts fit your specific engine and build, including bore, compression height and bearing dimensions. An upgraded oiling system can be relevant at high revs or for track use, where oil pressure can drop in hard corners. After assembly, the engine is typically broken in according to the manufacturer's instructions, and the first oil change is done early to remove wear particles.

Frequently asked questions

Do I need to change pistons if I increase boost?

It depends on the engine, the original pistons and how much the boost is increased. For bigger changes, lower-compression pistons are typically chosen, but the choice should be assessed together with connecting rods, fuel and engine management.

Should the camshaft and valve springs be replaced at the same time?

Often, yes. A camshaft with more lift or a more aggressive profile may require different springs, retainers and valve locks. Check the cam manufacturer's recommended spring pressure and the piston-to-valve clearance before you assemble the engine.

Can I assemble the engine myself with the new parts?

It requires experience, precise measuring tools and the manufacturer's specifications. Bearing clearance, ring gap and torque specs must be checked carefully. If you don't have the equipment, the safest option is to let an engine shop handle the assembly.

Engines & Components
View as Grid List
Sort by
Display per page

Valve-R/F 2.100,+.200

man11584-8
Manley Chevrolet Small Block Intake Valve Kit - 2.100in Head Dia. 5.140in O/A Length, 0.3415in Stem
$269.10 excl. VAT

Valve-R/F 2.100,+.300

man11594-8
Manley Chevrolet Small Block Intake Valve Kit - 2.100in Head Dia. 5.240in O/A Length, 0.3415in Stem
$269.10 excl. VAT

Valve-R/F 2.125,+.100

man11774-8
Manley Chevrolet Small Block Intake Valve Kit - 2.125in Head Dia. 5.040in O/A Length, 0.3415in Stem
$269.10 excl. VAT

Valve-R/F 2.125,+.200

man11776-8
Manley Chevrolet Small Block Intake Valve Kit - 2.125in Head Dia. 5.140in O/A Length, 0.3415in Stem
$269.10 excl. VAT

Valve-R/F 2.125,+.300

man11778-8
Manley Chevrolet Small Block Intake Valve Kit - 2.125in Head Dia. 5.240in O/A Length, 0.3415in Stem
$269.10 excl. VAT

Valve-R/F FORD 2.3L EcoBoost 32.5mm

man11196-8
Manley Ford 2.3L EcoBoost Intake 32.5mm Stainless Race Flo Valves
$279.30 excl. VAT

Valve-R/F FORD 2.3L EcoBoost 33.0mm

man11198-8
Manley Ford 2.3L EcoBoost Exhaust 33mm Stainless Race Master Valves
$279.30 excl. VAT

Valve-R/F L83 5.3L 1.930, .3133 STEM

man12356-8
Manley 94-97 Chevy 5.3L LS/L83 1.930 Head Diameter Pro Flo Intake Valves (Set of 8)
$261.23 excl. VAT

Valve-R/F NISSAN PATROL 38.5mm

man11142-12
Manley Nissan 4.8L VTC intake Valve Kit - 38.50mm Head Dia. 100.21mm O/A Length, 0.2740in Stem
$648.16 excl. VAT

Valve-R/F NISSAN PATROL 39.7mm

man11144-12
Manley Nissan 4.8L VTC intake Valve Kit - 39.70mm Head Dia. 100.21mm O/A Length, 0.2740in Stem
$648.16 excl. VAT

Valve-R/F NISSAN PATROL 40.5mm

man11180-12
Manley Nissan 4.8L VTC intake Valve Kit - 40.50mm Head Dia. 100.21mm O/A Length, 0.2740in Stem
$629.87 excl. VAT

Valve-R/F NISSAN PATROL 40.5mm

man11178-12
Manley Nissan Patrol 40.5mm Race Master Intake Valves (Set of 12)
$631.01 excl. VAT

Valve-R/F NISSAN PATROL 40mm

man11174-12
Manley Nissan Patrol 40mm Race Master Intake Valves (Set of 12)
$620.30 excl. VAT

Valve-R/F NISSAN PATROL 40mm

man11176-12
Manley Nissan 4.8L VTC intake Valve Kit - 40.00mm Head Dia. 100.21mm O/A Length, 0.2740in Stem
$629.87 excl. VAT

Valve-R/F TOYOTA 1FZ-FE 38.0mm

man11166-12
Manley Toyota Land Cruiser 4.5L (1FZ-FE) 38MM Race Flo Intake Valves
$571.16 excl. VAT

Valve-R/F TOYOTA 1FZ-FE 39.2mm

man11168-12
Manley Toyota 4.5L 1FZ-FE intake Valve Kit - 39.20mm Head Dia. 100.00mm O/A Length, 0.2740in Stem
$570.13 excl. VAT

Valve-R/F TOYOTA 1FZ-FE 39.5mm

man11188-12
Manley 93-98 Toyota Land Cruiser 4.5L (1FZ-FE) 39.5mm Race Flo Intake Valves - Set of 12
$570.13 excl. VAT

Valve-R/F TOYOTA 1FZ-FE 39.5mm

man11186-12
Manley Toyota Land Cruiser 4.5L (1FZ-FE) DOHC 24 Valve 39.5mm Race Flo Intake Valves (Set of 24)
$570.13 excl. VAT

Valve-R/F TOYOTA 1FZ-FE 40.0mm

man11170-12
Manley Toyota 4.5L 1FZ-FE intake Valve Kit - 40.00mm Head Dia. 100.00mm O/A Length, 0.2740in Stem
$570.13 excl. VAT

Valve-R/F TOYOTA 1FZ-FE 40.0mm

man11172-12
Manley Toyota 4.5L 1FZ-FE intake Valve Kit - 40.00mm Head Dia. 100.00mm O/A Length, 0.2740in Stem
$570.13 excl. VAT

Valve-R/F TOYOTA SCION 34mm

man11156-8
Manley Toyota Scion tC 2.4L (2AZFE) DOHC 16 Intake 34mm Stainless Race Master Valves
$281.58 excl. VAT

Valve-R/F TOYOTA SCION 35mm

man11158-8
Manley Toyota Scion tC 2.4L (2AZFE) DOHC 16 Intake 35mm Stainless Race Master Valves
$281.58 excl. VAT

Valve-R/F W-2 1.600

man11703-8
Manley Severe Duty Stainless Steel Exhaust Valves Chrysler V8 1.600 - Set of 8
$269.10 excl. VAT

Valve-R/M 1.500,+.100

man11301-8
Manley Chevrolet Small Block Exhaust Valve Kit - 1.500in Head Dia. 5.065in O/A Length, 0.3415in Stem
$269.10 excl. VAT