0

Engines & Components

Is your engine stripped down on the bench, or do you just need new valve springs for the cylinder head? In this category we bring together engine parts for projects that demand more than the original parts can handle: pistons, connecting rods, crankshafts, camshafts, bearings, oiling systems and cylinder heads. The parts are aimed at you if you are building for higher boost, more revs or track use.

What the parts in the engine do

An engine consists of systems that have to work together. The rotating assembly – crankshaft, connecting rods and pistons – converts combustion pressure into torque, while the camshaft and valvetrain control when air flows in and out. Bearings and the oiling system keep the moving parts separated by an oil film, and the cylinder head has a major influence on how well the engine breathes. If you increase boost or revs, the load on every part rises, and the weakest link sets the limit. So plan the whole project before you buy individual parts, or take a look at a complete engine kit with rotating assembly.

How to choose pistons and connecting rods

The pistons must match the bore, stroke, rod length and the compression ratio you want. For high-boost engines, lower compression is typically chosen, often via a dish in the piston crown. Also look at the ring pack, wrist pin and any coating. The range includes, for example, Wiseco piston kits and ring sets as well as Manley piston kits for the Chrysler 6.4L Hemi, and JE Pistons and Eagle are also among the brands. The connecting rods must be able to withstand the increased load and have a length that suits the piston and crankshaft – especially in stroker projects where the stroke is changed.

Camshaft and valvetrain must match

A camshaft with more lift and longer duration can move the power band upwards, but the valve springs, retainers and valve locks must be able to keep up. Too little spring pressure can cause valve float at high revs, while unnecessarily high pressure can increase wear on the cam and lifters. So choose based on lift, spring pressure, piston-to-valve clearance and how the engine is used. COMP Cams, for example, offers a beehive spring kit with steel retainers for the Dodge 5.7L Hemi model years 03-08, designed for 0.600 inch lift.

Installation, tolerances and break-in

High-performance engine parts require precise installation. Bearing clearance, piston clearance and ring gap must be measured and adjusted according to the manufacturer's instructions, and the ring gap depends on factors such as bore and application. Check that the parts fit your specific engine and build, including bore, compression height and bearing dimensions. An upgraded oiling system can be relevant at high revs or for track use, where oil pressure can drop in hard corners. After assembly, the engine is typically broken in according to the manufacturer's instructions, and the first oil change is done early to remove wear particles.

Frequently asked questions

Do I need to change pistons if I increase boost?

It depends on the engine, the original pistons and how much the boost is increased. For bigger changes, lower-compression pistons are typically chosen, but the choice should be assessed together with connecting rods, fuel and engine management.

Should the camshaft and valve springs be replaced at the same time?

Often, yes. A camshaft with more lift or a more aggressive profile may require different springs, retainers and valve locks. Check the cam manufacturer's recommended spring pressure and the piston-to-valve clearance before you assemble the engine.

Can I assemble the engine myself with the new parts?

It requires experience, precise measuring tools and the manufacturer's specifications. Bearing clearance, ring gap and torque specs must be checked carefully. If you don't have the equipment, the safest option is to let an engine shop handle the assembly.

Engines & Components
View as Grid List
Sort by
Display per page

Valve-SBC S/M 1.560

man10747-8
Manley Chevrolet Small Block Exhaust Valve Kit - 1.560in Head Dia. 4.911in O/A Length, 0.3415in Stem
$202.12 excl. VAT

Valve-SBC S/M 1.600

man10749-8
Manley Chevrolet Small Block Exhaust Valve Kit - 1.600in Head Dia. 4.911in O/A Length, 0.3415in Stem
$202.12 excl. VAT

Valve-SBC S/M 1.940

man10776-8
Manley Chevrolet Small Block Intake Valve Kit - 1.940in Head Dia. 4.911in O/A Length, 0.3415in Stem
$202.12 excl. VAT

Valve-SBC S/M 2.020

man10750-8
Manley Small Block Chevrolet Street Master Intake Valves
$202.12 excl. VAT

Valve-SBC S/M 2.055

man10754-8
Manley Chevy Small Block 2.055in Dia .3415 Stem Dia Street Master Intake Valves (Set of 8)
$202.12 excl. VAT

Valve-SBC S/M 2.055,+.100

man10746-8
Manley Chevrolet Small Block Intake Valve Kit - 2.055in Head Dia. 5.040in O/A Length, 0.3415in Stem
$202.12 excl. VAT

Valve-SBF R/F 1.465

man11523-8
Manley Ford 289 Exhaust Valve Kit - 1.465in Head Dia. 5.080in O/A Length, 0.3415in Stem
$269.10 excl. VAT

Valve-SBF R/F 1.550

man11575-8
Manley Ford 289/302/351W 1.550 Race Flo Exhaust Valves
$269.28 excl. VAT

Valve-SBF R/F 1.600

man11889-8
Manley Ford 289 - 302 - 351W 1.600 Head Dia 5.080 OA L 5 Deg Dish Race Flo Exhaust Valves (Set of 8)
$269.10 excl. VAT

Valve-SBF R/F 1.600

man11531-8
Manley Ford 289 Exhaust Valve Kit - 1.600in Head Dia. 4.911in O/A Length, 0.3415in Stem
$269.10 excl. VAT

Valve-SBF R/F 1.785

man11572-8
Manley Chevrolet Small Block Intake Valve Kit - 1.785in Head Dia. 5.075in O/A Length, 0.3420in Stem
$269.10 excl. VAT

Valve-SBF R/F 1.850

man11578-8
Manley Ford 289intake Valve Kit - 1.850in Head Dia. 5.075in O/A Length, 0.3420in Stem
$269.10 excl. VAT

Valve-SBF R/F 1.940

man11532-8
Manley Ford 289intake Valve Kit - 1.940in Head Dia. 4.911in O/A Length, 0.3415in Stem
$269.10 excl. VAT

Valve-SBF S/F 1.465

man10723-8
Manley Ford 289-302-35IW Budget Performance Street Flo Exhaust Valves (For use w/ Rail Type Rockers)
$202.12 excl. VAT

Valve-SBF S/F 1.850

man10778-8
Manley Ford 289/302/351W Street Flo Exhaust Valves 1.850 in Dia for use with Rail Type Rockers
$264.54 excl. VAT

Valve-TI 1.600

man11405T-8
Manley Titanium Exhaust Valve Kit - Small Block GM, Ford, Chrysler
$1,630.72 excl. VAT

Valve-TI 1.600

man11471HTB-8
Manley Titanium Exhaust Valve Kit - Small Block GM, Ford, Chrysler
$1,696.12 excl. VAT

Valve-TI 1.600

man11451TB-8
Manley Titanium Exhaust Valve Kit - Small Block GM, Ford, Chrysler
$1,630.72 excl. VAT

Valve-TI 1.600

man11427HTB-8
Manley Titanium Exhaust Valve Kit - Small Block GM, Ford, Chrysler
$1,696.12 excl. VAT

Valve-TI 1.600

man11407T-8
Manley Titanium Exhaust Valve Kit - Small Block GM, Ford, Chrysler
$1,630.72 excl. VAT

Valve-TI 1.600

man11401TB-8
Manley Titanium Exhaust Valve Kit - Small Block GM, Ford, Chrysler
$1,630.72 excl. VAT

Valve-TI 1.600

man11403T-8
Manley Titanium Exhaust Valve Kit - Small Block GM, Ford, Chrysler
$1,630.72 excl. VAT

Valve-TI 1.600

man11487TB-8
Manley Titanium Exhaust Valve Kit - Small Block GM, Ford, Chrysler
$1,628.49 excl. VAT

Valve-TI 1.600

man11467HT-8
Manley Titanium Exhaust Valve Kit - Small Block GM, Ford, Chrysler
$1,696.12 excl. VAT