0

Exhaust Manifolds

A ticking noise on cold start or an exhaust smell in the cabin can be caused by a cracked exhaust manifold or a leaking gasket. Here we bring together manifolds and manifold kits for e.g. Jeep, Willys, Dodge Ram and Ford F-150 – for you who need to replace a faulty part or renew the exhaust on your project.

What an exhaust manifold does

The exhaust manifold collects the exhaust gas from the cylinders and routes it on to the rest of the exhaust system. It works under large temperature swings, and over time this can lead to cracks, warped flanges or leaking joints. Under cast exhaust manifolds you will find e.g. cast manifolds from BD Diesel, while OMIX offers both individual manifolds and complete manifold kits. You can find more types under manifolds.

How to choose the right manifold

Fitment depends on several factors, so check the part number against your vehicle on these points:

  • Engine and model year: e.g. 5.7L Hemi in Dodge Ram, 3.5L Ecoboost in Ford F-150 or 6.6L Duramax in Chevrolet/GMC 2500HD/3500HD.
  • Side: V engines typically have one manifold on each side, and several products are sold separately for the driver or passenger side.
  • Kit or single part: a kit can contain more than the manifold itself – check the product description to see what is included.
  • Flange and connection: the flange must match both the cylinder head and the downstream pipe.

Installation and maintenance

Old bolts and studs are often seized after many heat cycles and can snap during removal, so plan for that. Use new gaskets, clean the mating surfaces and tighten the bolts evenly to the vehicle's specification. If a flange needs to be repaired or adapted, you will find parts under manifold flanges. You can also see all products from BD Diesel and OMIX.

Frequently asked questions

How can I tell if the exhaust manifold is cracked?

Typical signs are a ticking noise that is often most noticeable on cold start, soot around the flange or an exhaust smell. A crack can be hard to see, so it may be necessary to remove and inspect the manifold.

Do I need to replace both sides on a V engine?

It is not always necessary, and several manifolds are sold for one side. However, if both sides are the same age and equally worn, it can be worth inspecting the other side while the exhaust is apart anyway.

Does a new exhaust manifold need to be approved for inspection?

It depends on the product and the vehicle. A manifold equivalent to the original typically does not change the vehicle's approval, but always check the specific part number and any requirements for emission-related parts before installing.

View as Grid List
Sort by
Display per page

EXHAUST MANIFOLD DS CHEVY/GMC V8

bdd1041402
BD Diesel Driver Side Exhaust Manifold - 02-13 Chevy Silverado 1500 & GMC Sierra 1500 V8
2.816,14 € excl. VAT

EXHAUST MANIFOLD DS FORD 7.3L 99-03

bdd1041471
BD Diesel 99-03 73.L Ford F150/F250/F350 Powerstroke 6.2L Driver Side Exhaust Manifold
3.582,31 € excl. VAT

EXHAUST MANIFOLD DS FORD BOSS 6.2L 10-22

bdd1043057
BD Diesel 10-22 Ford F150/F250/F350 BOSS 6.2L Driver Side Exhaust Manifold
2.837,43 € excl. VAT

EXHAUST MANIFOLD DS RAM 6.4L HEMI 14-24

bdd1041456
BD Diesel 14-24 RAM 2500-5500 6.4L Hemi Driver Side Exhaust Manifold
4.066,34 € excl. VAT

EXHAUST MANIFOLD PASSENGER SIDE RAM 1500

bdd1041469
BD Diesel 19-24 Dodge/Ram 1500 DT 5.7L Hemi Passenger Side Exhaust Manifold
2.888,64 € excl. VAT

EXHAUST MANIFOLD PS CHEVY/GMC V8

bdd1041401
BD Diesel Passenger Side Exhaust Manifold - 02-13 Chevy Silverado 1500 & GMC Sierra 1500 V8
2.815,10 € excl. VAT