0

Fuel Injectors

Are your stock injectors no longer enough after you have raised the boost pressure or switched to E85? In this category you will find higher-flow fuel injectors for petrol engines as well as diesel injectors for your project, so the engine can get the amount of fuel your power target requires.

How to choose fuel injectors

The most important criterion is flow, which is stated in cc/min, e.g. 550, 1050 or 1600 cc. The right flow depends on power target, number of cylinders, fuel type and fuel pressure. Injectors that are too small can result in a mixture that is too lean, while very large injectors can make idle and cold starts harder to calibrate. Also check:

  • Physical fitment: length, top diameter (e.g. 11 mm) and O-rings must match your fuel rail and intake. If the dimensions differ, injector adapters can be a solution.
  • Connector: if the injector connector does not match your wiring harness, injector connectors and adapter harnesses are available.
  • Quantity: injectors are sold in sets (e.g. 2 or 4) or individually, so check the quantity against your engine.

Brands in this category include Injector Dynamics, Grams Performance, DeatschWerks and Exergy. For diesel engines we also have a separate category with diesel injectors.

Installation and calibration

Larger injectors typically require the engine management to be calibrated with the correct injector data, otherwise the air-fuel ratio can be wrong. Use new O-rings and seals for every installation – see fuel injector seals – and lubricate them lightly so they are not damaged when the injector is pressed into place. Check for leaks before starting the engine, and make sure the fuel pump can deliver the required amount at the desired pressure.

Frequently asked questions

How much flow do my new fuel injectors need?

It depends on power target, number of cylinders, fuel type and fuel pressure. E85 typically requires significantly more flow than petrol. Calculate your requirement with a margin so the injectors do not have to run at full duty cycle.

Does the engine management need adjusting after an injector swap?

Typically yes. The engine management needs to know the injectors' flow and response data to meter fuel correctly. Without calibration, the mixture can become too rich or too lean, which can cause poor running and in the worst case engine damage.

What are the signs of a faulty or clogged injector?

Typical signs are a rough idle, misfiring on one cylinder, increased fuel consumption or a smell of fuel. The cause can also lie elsewhere, e.g. in the ignition, so have the fault diagnosed before you replace the injectors.

View as Grid List
Sort by
Display per page

DeatschWerks Fuel Injectors

dwk16S-06-2200-8
DeatschWerks 00-03 BMW M5 E39 S62 2200cc Injectors - Set of 8
10.328,19 € excl. VAT

DeatschWerks Fuel Injectors

dwk22TX-00-0440-4
DeatschWerks 11+ Scion tc 440cc Injectors
2.693,72 € excl. VAT

DeatschWerks Fuel Injectors

dwk16S-03-2400-4
DeatschWerks Set of 4 2400cc High Impedance Injectors for Mitsubishi Eclipse (DSM) 4G63T 95-99
7.521,10 € excl. VAT

DeatschWerks Fuel Injectors

dwk16M-07-1500-4
DeatschWerks 02-14 Subaru WRX / 07-14 Legacy GT / 07-14 STI Bosch EV14 1500cc Injectors (Set of 4)
6.535,34 € excl. VAT

DeatschWerks Fuel Injectors

dwk18U-00-0050-6
DeatschWerks 99-10 V6 Mustang 50lb Top Feed Injectors
2.983,14 € excl. VAT

DeatschWerks Fuel Injectors

dwk17MX-00-0600-10
DeatschWerks 05-10 BMW E60/E63/E64 S85 600cc Injectors - Set of 10
7.834,79 € excl. VAT

Deatschwerks Fuel Injectors

dwk16M-LS-1500-8
DeatschWerks LS 1500cc Injector Kit - Set of 8
11.109,01 € excl. VAT

DeatschWerks Fuel Injectors

dwk42M-11-0350-6
DeatschWerks Universal 350cc Low Impedance 11mm Upper Injector - Set of 6
3.089,57 € excl. VAT

DeatschWerks Fuel Injectors

dwk16M-05-1500-6
DeatschWerks 89-94 Nissan Skyline RB20DET / 89-02 RB26DETT Bosch EV14 1500cc Injectors (Set of 6)
8.297,06 € excl. VAT

DeatschWerks Fuel Injectors

dwk17U-01-0440-8
DeatschWerks 03-06 Mercedes-Benz CL55 AMG(SC)/E55 AMG(SC) 440cc/min Injectors - Set of 8
4.810,84 € excl. VAT

DeatschWerks Fuel Injectors

dwk16MX-22-1200-10
DeatschWerks 03-10/12-17 Dodge Viper / 92-02 Dodge Viper (for Top Feed) 1200cc Injectors (Set of 10)
8.755,73 € excl. VAT

DeatschWerks Fuel Injectors

dwk16S-11-2400-8
DeatschWerks Bosch EV14 Universal 60mm/11mm Matched Set of 8 Injectors 2400cc/min
12.422,57 € excl. VAT

DeatschWerks Fuel Injectors

dwk16MX-21-1200-6
DeatschWerks 05-10 Ford Mustang 4.0L V6 Bosch EV14 1200cc Injectors (Set of 6)
6.247,20 € excl. VAT

DeatschWerks Fuel Injectors

dwk16S-IMP-2400-4
DeatschWerks Universal 4 Cylinder Import Injector Kit - Set of Four 2440cc Injectors
7.915,62 € excl. VAT

DeatschWerks Fuel Injectors

dwk16u-18-0450-6
DeatschWerks 00-06 BMW M3 450cc Injector Set - 6 Cyl
3.145,10 € excl. VAT

DeatschWerks Fuel Injectors

dwk17MX-03-1100-4
DeatschWerks 12-16 Dodge Dart 1.4L Turbo Set of 4 - 1100cc Injectors
3.213,21 € excl. VAT

DeatschWerks Fuel Injectors

dwk16MX-00-0750-6
DeatschWerks Bosch EV14 Universal 40mm Compact Matched Set of 6 Injectors 750cc (Extended Nozzle)
6.247,20 € excl. VAT

DeatschWerks Fuel Injectors

dwk16S-IMP-2400-6
DeatschWerks Universal 6 Cylinder Import Injector Kit - Set of Six 2400cc Injectors
10.071,79 € excl. VAT

DeatschWerks Fuel Injectors

dwk16S-12-2400-4
DeatschWerks Bosch EV14 Universal 48mm/14mm Matched Set of 4 Injectors 2400cc/min
7.521,10 € excl. VAT

DeatschWerks Fuel Injectors

dwk16U-IMP-1500-6
DeatschWerks Universal 6 Cylinder Import Injector Kit - Set of Six 1500cc Injectors
8.694,74 € excl. VAT

DeatschWerks Fuel Injectors

dwk16MX-20-1200-6
DeatschWerks 99-10 Ford Mustang V6 3.8 / 4.0L Bosch EV14 1200cc Injectors (Set of 6)
6.247,20 € excl. VAT

DeatschWerks Fuel Injectors

dwk21S-06-0550-8
DeatschWerks 01-09 Audi S4/RS6/S6 4.2L V8 550cc Injectors - Set of 8
5.491,20 € excl. VAT

DeatschWerks Fuel Injectors

dwk16MX-03-1250-6
DeatschWerks Set of 6 Bosch EV14 1250cc Injectors for Honda Accord V6 03-07
6.237,16 € excl. VAT

DeatschWerks Fuel Injectors

dwk16S-07-2200-6
DeatschWerks 93-98 Toyota Supra TT 2200cc Injectors for Top Feed Conversion 11mm O-Ring (set of 6)
8.109,20 € excl. VAT