0

Fuel Injectors

Are your stock injectors no longer enough after you have raised the boost pressure or switched to E85? In this category you will find higher-flow fuel injectors for petrol engines as well as diesel injectors for your project, so the engine can get the amount of fuel your power target requires.

How to choose fuel injectors

The most important criterion is flow, which is stated in cc/min, e.g. 550, 1050 or 1600 cc. The right flow depends on power target, number of cylinders, fuel type and fuel pressure. Injectors that are too small can result in a mixture that is too lean, while very large injectors can make idle and cold starts harder to calibrate. Also check:

  • Physical fitment: length, top diameter (e.g. 11 mm) and O-rings must match your fuel rail and intake. If the dimensions differ, injector adapters can be a solution.
  • Connector: if the injector connector does not match your wiring harness, injector connectors and adapter harnesses are available.
  • Quantity: injectors are sold in sets (e.g. 2 or 4) or individually, so check the quantity against your engine.

Brands in this category include Injector Dynamics, Grams Performance, DeatschWerks and Exergy. For diesel engines we also have a separate category with diesel injectors.

Installation and calibration

Larger injectors typically require the engine management to be calibrated with the correct injector data, otherwise the air-fuel ratio can be wrong. Use new O-rings and seals for every installation – see fuel injector seals – and lubricate them lightly so they are not damaged when the injector is pressed into place. Check for leaks before starting the engine, and make sure the fuel pump can deliver the required amount at the desired pressure.

Frequently asked questions

How much flow do my new fuel injectors need?

It depends on power target, number of cylinders, fuel type and fuel pressure. E85 typically requires significantly more flow than petrol. Calculate your requirement with a margin so the injectors do not have to run at full duty cycle.

Does the engine management need adjusting after an injector swap?

Typically yes. The engine management needs to know the injectors' flow and response data to meter fuel correctly. Without calibration, the mixture can become too rich or too lean, which can cause poor running and in the worst case engine damage.

What are the signs of a faulty or clogged injector?

Typical signs are a rough idle, misfiring on one cylinder, increased fuel consumption or a smell of fuel. The cause can also lie elsewhere, e.g. in the ignition, so have the fault diagnosed before you replace the injectors.

View as Grid List
Sort by
Display per page

Fast Precision-Flow Fuel Injectors

fst30907-1
FAST Precision Flow LS7 Style Fuel Injector (90lb/hr) - Single
782,70 € excl. VAT

Fast Precision-Flow Fuel Injectors

fst30592-1
FAST Precision Flow LS2 Style Fuel Injector (59lb/hr) - Single
757,10 € excl. VAT

Fast Precision-Flow Fuel Injectors

fst30522-1
FAST Precision Flow LS2 Style Fuel Injector (51lb/hr) - Single
757,10 € excl. VAT

Fast Precision-Flow Fuel Injectors

fst30667-1
FAST Precision Flow LS7 Style Fuel Injector (65lb/hr) - Single
757,10 € excl. VAT

Fast Precision-Flow Fuel Injectors

fst30117-1
FAST Precision Flow LS7 Style Fuel Injector (112lb/hr) - Single
1.008,39 € excl. VAT

Fast Precision-Flow Fuel Injectors

fst30902-1
FAST Precision Flow LS2 Style Fuel Injector (90lb/hr) - Single
855,08 € excl. VAT

Fast Precision-Flow Fuel Injectors

fst30517-1
FAST Precision Flow LS7 Style Fuel Injector (50lb/hr) - Single
757,10 € excl. VAT

Fast Precision-Flow Fuel Injectors

fst30177-1
FAST Precision Flow LS7 Style Fuel Injector (177lb/hr) - Single
1.783,00 € excl. VAT

Fast Precision-Flow Fuel Injectors

fst30277-1
FAST Precision Flow LS7 Style Fuel Injector (245lb/hr) - Single
1.806,72 € excl. VAT

Fuel Injector 60 Lb/Hr Short (Single)

ede3696
Edelbrock Fuel Injector Siemens 60 lb/hr - Sold Individually
891,81 € excl. VAT

Fuel Injector Set - M-9593-55VDE

frpM-9593-55VDE
Ford Racing 2021+ F150 5.0L Coyote 55lb Variable Displacement Engine Fuel Injector Set
4.149,23 € excl. VAT

Fuel Injector Set - M-9593-GT3

frpM-9593-GT3
Ford Racing Mustang GT3 Fuel injectors - Set of 8
4.577,79 € excl. VAT