0

Fuel Injectors

Are your stock injectors no longer enough after you have raised the boost pressure or switched to E85? In this category you will find higher-flow fuel injectors for petrol engines as well as diesel injectors for your project, so the engine can get the amount of fuel your power target requires.

How to choose fuel injectors

The most important criterion is flow, which is stated in cc/min, e.g. 550, 1050 or 1600 cc. The right flow depends on power target, number of cylinders, fuel type and fuel pressure. Injectors that are too small can result in a mixture that is too lean, while very large injectors can make idle and cold starts harder to calibrate. Also check:

  • Physical fitment: length, top diameter (e.g. 11 mm) and O-rings must match your fuel rail and intake. If the dimensions differ, injector adapters can be a solution.
  • Connector: if the injector connector does not match your wiring harness, injector connectors and adapter harnesses are available.
  • Quantity: injectors are sold in sets (e.g. 2 or 4) or individually, so check the quantity against your engine.

Brands in this category include Injector Dynamics, Grams Performance, DeatschWerks and Exergy. For diesel engines we also have a separate category with diesel injectors.

Installation and calibration

Larger injectors typically require the engine management to be calibrated with the correct injector data, otherwise the air-fuel ratio can be wrong. Use new O-rings and seals for every installation – see fuel injector seals – and lubricate them lightly so they are not damaged when the injector is pressed into place. Check for leaks before starting the engine, and make sure the fuel pump can deliver the required amount at the desired pressure.

Frequently asked questions

How much flow do my new fuel injectors need?

It depends on power target, number of cylinders, fuel type and fuel pressure. E85 typically requires significantly more flow than petrol. Calculate your requirement with a margin so the injectors do not have to run at full duty cycle.

Does the engine management need adjusting after an injector swap?

Typically yes. The engine management needs to know the injectors' flow and response data to meter fuel correctly. Without calibration, the mixture can become too rich or too lean, which can cause poor running and in the worst case engine damage.

What are the signs of a faulty or clogged injector?

Typical signs are a rough idle, misfiring on one cylinder, increased fuel consumption or a smell of fuel. The cause can also lie elsewhere, e.g. in the ignition, so have the fault diagnosed before you replace the injectors.

View as Grid List
Sort by
Display per page

INJECTOR STOCK DODGE 6.7L 2007.5-2010

bdd1715571
BD Diesel 2007.5-2010 Dodge/RAM 6.7L Cummins Injector Reman (0986435519)
3.016,23 € excl. VAT

INJECTOR STOCK DODGE 6.7L 2007.5-2012

bdd1715518
BD Diesel Injector - Dodge 6.7L Cummins 2007.5-2012 Stock Replacement (Each)
2.959,37 € excl. VAT

INJECTOR STOCK DODGE 6.7L 2010.5-2012

bdd1715588
BD Diesel 2010.5-2016 Dodge/RAM 6.7L Cummins Injector Reman (0986435574)
3.016,23 € excl. VAT

INJECTOR STOCK DODGE 6.7L 2013-2018

bdd1715589
BD Diesel 13-18 RAM 6.7L Cummins Injector Reman (0986435573)
2.961,00 € excl. VAT

INJECTORS BOSCH S3 GOLF R

aprMS100041
APR 09-13 Audi A3 Quattro OEM High Flow Injectors - Set of 4
9.982,70 € excl. VAT

Injectors + Install Chevy/GM 6.6L 01-04

bdd1050180
BD Diesel 01-04 Chevy/GM Duramax 6.6L LB7 Injectors & Install Kit
19.395,24 € excl. VAT

Injectors + Install Dodge/Ram 6.7L 13-18

bdd1050188
BD Diesel 13-18 Dodge/Ram Cummins 6.7L Cab & Chassis Injectors & Install Kit
22.093,95 € excl. VAT

Injectors/Install Dodge/Ram 5.9L 04.5-05

bdd1050182
BD Diesel 2004.5-2005 Dodge/Ram Cummins 5.9L Injectors & Install Kit
17.250,08 € excl. VAT

Injectors/Install Dodge/Ram 6.7L 07.5-10

bdd1050186
BD Diesel 2007.5-2010 Dodge/Ram Cummins 6.7L Cab & Chassis w/o SCR Injectors & Install Kit
22.093,95 € excl. VAT

Injectors/Install Dodge/Ram 6.7L 07.5-12

bdd1050184
BD Diesel 2007.5-2012 Dodge/Ram Cummins 6.7L Injectors & Install Kit
22.312,58 € excl. VAT

Injectors/Install Dodge/Ram 6.7L 10.5/12

bdd1050187
BD Diesel 2010.5-2012 Dodge/Ram Cummins 6.7L w/ SCR Injectors & Install Kit
21.670,42 € excl. VAT

LS1 36 Lb/Hr Injector

fst303600
FAST Injector FAST Single 36-Lb/hr
552,81 € excl. VAT

LS1 36 Lb/Hr Injector 6 Pack

fst303606
FAST Injector FAST 6-Pack 36-Lb/hr
2.819,73 € excl. VAT

LS1 36 Lb/Hr Injector 8 Pack

fst303608
FAST Injector FAST 8-Pack 36-Lb/hr
4.162,97 € excl. VAT

LS1 60 Lb/Hr Injector

fst306000
FAST Injector Single 60Lb/hr High
937,42 € excl. VAT

LS1 60 Lb/Hr Injector 4 Pack

fst306004
FAST Injector 4-Pack 60Lb/hr High
3.118,39 € excl. VAT

LS1 60 Lb/Hr Injector 6 Pack

fst306006
FAST Injector 6-Pack 60Lb/hr High
4.682,04 € excl. VAT

LS2 33 Lb/Hr Injector

fst30332-1
FAST Injector FAST Single 33Lb/hr
553,79 € excl. VAT

LS2 33 Lb/Hr Injector Pack 4

fst30332-4
FAST Injector FAST 4Pack 33Lb/hr
1.780,45 € excl. VAT

LS2 33 Lb/Hr Injector Pack 6

fst30332-6
FAST Injector FAST 6-Pack 33Lb/hr
2.705,77 € excl. VAT