0

Fuel Injectors

Are your stock injectors no longer enough after you have raised the boost pressure or switched to E85? In this category you will find higher-flow fuel injectors for petrol engines as well as diesel injectors for your project, so the engine can get the amount of fuel your power target requires.

How to choose fuel injectors

The most important criterion is flow, which is stated in cc/min, e.g. 550, 1050 or 1600 cc. The right flow depends on power target, number of cylinders, fuel type and fuel pressure. Injectors that are too small can result in a mixture that is too lean, while very large injectors can make idle and cold starts harder to calibrate. Also check:

  • Physical fitment: length, top diameter (e.g. 11 mm) and O-rings must match your fuel rail and intake. If the dimensions differ, injector adapters can be a solution.
  • Connector: if the injector connector does not match your wiring harness, injector connectors and adapter harnesses are available.
  • Quantity: injectors are sold in sets (e.g. 2 or 4) or individually, so check the quantity against your engine.

Brands in this category include Injector Dynamics, Grams Performance, DeatschWerks and Exergy. For diesel engines we also have a separate category with diesel injectors.

Installation and calibration

Larger injectors typically require the engine management to be calibrated with the correct injector data, otherwise the air-fuel ratio can be wrong. Use new O-rings and seals for every installation – see fuel injector seals – and lubricate them lightly so they are not damaged when the injector is pressed into place. Check for leaks before starting the engine, and make sure the fuel pump can deliver the required amount at the desired pressure.

Frequently asked questions

How much flow do my new fuel injectors need?

It depends on power target, number of cylinders, fuel type and fuel pressure. E85 typically requires significantly more flow than petrol. Calculate your requirement with a margin so the injectors do not have to run at full duty cycle.

Does the engine management need adjusting after an injector swap?

Typically yes. The engine management needs to know the injectors' flow and response data to meter fuel correctly. Without calibration, the mixture can become too rich or too lean, which can cause poor running and in the worst case engine damage.

What are the signs of a faulty or clogged injector?

Typical signs are a rough idle, misfiring on one cylinder, increased fuel consumption or a smell of fuel. The cause can also lie elsewhere, e.g. in the ignition, so have the fault diagnosed before you replace the injectors.

View as Grid List
Sort by
Display per page

DeatschWerks Fuel Injectors

dwk17MX-00-0850-4
DeatschWerks 12-16 Dodge Dart 1.4L Turbo 800cc Top Feed Injectors
3.134,57 € excl. VAT

DeatschWerks Fuel Injectors

dwk17U-00-0060-8
DeatschWerks LS2 / 5.7L & 6.1L HEMI 60lb Injectors - Set of 8
5.327,78 € excl. VAT

DeatschWerks Fuel Injectors

dwk18U-11-0650-4
DeatschWerks 05+ Elise 1.8L / 00-05 Celica / 99-07 MR2 / 04-10 tC / 04-10 xA/xB 650CC Injectors
2.756,30 € excl. VAT

DeatschWerks Fuel Injectors

dwk17U-01-0750-4
DeatschWerks 01-06 Audi A4/TT / VW Golf GTI 750cc Injectors
3.058,73 € excl. VAT

DeatschWerks Fuel Injectors

dwk18U-00-0060-8
DeatschWerks 99-10 Mustang / 10-13 SVT Raptor 60lb Top Feed Injectors
4.118,03 € excl. VAT

DeatschWerks Fuel Injectors

dwk18U-01-0060-8
DeatschWerks LS1/LS6 Series / 85-04 4.6L & 5.0L V8 Mustang 60lb Injectors
4.119,06 € excl. VAT

DeatschWerks Fuel Injectors

dwk02J-00-0850-4
DeatschWerks 04-06 STi / 04-06 Legacy GT EJ25 850cc Side Feed Injectors *DOES NOT FIT OTHER YEARS*
5.100,88 € excl. VAT

DeatschWerks Fuel Injectors

dwk18U-02-0550-6
DeatschWerks Nissan Skyline RB20 550cc Top Feed Injectors
3.362,21 € excl. VAT

DeatschWerks Fuel Injectors

dwk18U-02-0550-4
DeatschWerks 240sx SOHC 550CC Top Feed Injectors
3.057,76 € excl. VAT

DeatschWerks Fuel Injectors

dwk17U-01-0550-6
DeatschWerks 01-06 BMW M3 / 02-04 Mercedes-Benz C32 AMG V6 550cc Fuel Injectors (Set of 6)
3.740,97 € excl. VAT

DeatschWerks Fuel Injectors

dwk35U-01-0060-8
DeatschWerks 00-06 Chevrolet Silverado/Sierra 60lb Injectors - Set of 8
3.742,00 € excl. VAT

DeatschWerks Fuel Injectors

dwk17MX-00-0600-6
DeatschWerks 98-00 BMW E46 M52 600cc Top Feed Injectors (Set of 6)
4.735,25 € excl. VAT

DeatschWerks Fuel Injectors

dwk18U-02-0900-4
DeatschWerks 89-90 Nissan 240sx SOHC KA24E 900cc Injectors - Set of 4
3.060,74 € excl. VAT

DeatschWerks Fuel Injectors

dwk17MX-10-1100-4
DeatschWerks 07-15 Mitsubishi Evo X 1100cc XT Nozzle Injectors
3.813,71 € excl. VAT

DeatschWerks Fuel Injectors

dwk17U-06-0650-6
DeatschWerks 03-15 350z/370z G35/G37 04-05 GTI R32 / NEO RB25DET 98-02 650cc Top Feed Injectors
4.722,84 € excl. VAT

DeatschWerks Fuel Injectors

dwk16MX-22-1200-8
DeatschWerks 06-13 Chevy Corvette Z06 LS7 1200cc Injectors (Set of 8)
7.975,64 € excl. VAT

DeatschWerks Fuel Injectors

dwk16M-12-1500-6
DeatschWerks 01-05 Lexus IS300 2JZ-GE Bosch EV14 1500cc Injectors (Set of 6)
8.297,06 € excl. VAT

DeatschWerks Fuel Injectors

dwk01J-00-0270-6
DeatschWerks 96-99 Nissan I30 VQ30 / Maxima VQ30de / 300zx 270cc Side Feed Injectors
4.196,48 € excl. VAT

Fast Precision-Flow Fuel Injectors

fst30302-8
FAST Precision Flow LS2 Style Fuel Injector (30lb/hr) - Set of 8
5.099,84 € excl. VAT

Fast Precision-Flow Fuel Injectors

fst30117-8
FAST Precision Flow LS7 Style Fuel Injector (112lb/hr) - Set of 8
6.862,60 € excl. VAT

Fast Precision-Flow Fuel Injectors

fst30277-8
FAST Precision Flow LS7 Style Fuel Injector (245lb/hr) - Set of 8
11.744,17 € excl. VAT