0

Fuel Pressure Regulators

Is your fuel pressure fluctuating, or does your project need a different pressure than stock? A fuel pressure regulator keeps the pressure to the injectors or carburettor stable. We stock regulators for both EFI and carburettors, with fixed or adjustable pressure.

What does a fuel pressure regulator do?

The regulator controls the pressure in the fuel system so the injectors or carburettor get an even supply. On many turbocharged or supercharged EFI systems, fuel pressure follows boost pressure via a reference line, so the difference between fuel pressure and intake pressure is typically kept constant. Bypass regulators send excess fuel back to the tank and therefore require a return line – see our return-style regulators.

How to choose a regulator

The right choice depends on the entire fuel system, not just the regulator:

  • System type: EFI typically requires higher pressure than a carburettor, and Aeromotive, for example, offers separate bypass regulators for each.
  • Pressure range: Adjustable models cover e.g. 35-75 or 30-120 PSI. Choose a range that suits your injectors.
  • Ports and fittings: The number and size of ports, e.g. AN-08, AN-10 or 3/8in NPT, must match your lines.
  • Flow: Valve size and pump capacity affect how much fuel the regulator can handle.

The regulator must match your fuel pump. A pump with much higher flow than the regulator can handle can cause excessive base pressure.

Installation and maintenance

Install the regulator according to the manufacturer's instructions and use a pressure gauge to set the pressure. Regularly check the reference line and seals, as a leaking line can cause incorrect pressure. A clogged filter can also affect pressure, so remember the pump strainers. We carry regulators from e.g. Fuelab, DeatschWerks and Edelbrock, plus more parts under pumps and regulators.

Frequently asked questions

Should I choose a regulator with or without return?

It depends on the system. A bypass regulator sends excess fuel back to the tank and requires a return line, while a returnless system controls pressure in a different way. A return setup can provide more stable pressure at higher power levels.

What fuel pressure should I set?

It depends on your injectors or carburettor and the engine's calibration. Carburettors typically run at significantly lower pressure than EFI. Set it according to the manufacturer's recommendation, measure with a pressure gauge, and check the mixture after making changes.

Why does the pressure fluctuate after installation?

Typical causes are a leaking or incorrectly connected reference line, a pump that doesn't match the regulator, or clogged filters. Also check that the return line is large enough so the fuel doesn't back up.

View as Grid List
Sort by
Display per page

FUELAB Fuel Pressure Reg

flb51505-1-L-L
Fuelab 515 Carb Adjustable FPR Large Seat 1-3 PSI (2) -10AN In (1) -6AN Return - Black
1.678,95 € excl. VAT

FUELAB Fuel Pressure Reg

flb51506-5-L-E
Fuelab 515 EFI Adjustable FPR Large Seat 25-90 PSI (2) -6AN In (1) -6AN Return - Gold
1.729,18 € excl. VAT

FUELAB Fuel Pressure Reg

flb51506-5-S-G
Fuelab 515 EFI Adjustable FPR 90-125 PSI (2) -6AN In (1) -6AN Return - Gold
1.729,18 € excl. VAT

FUELAB Fuel Pressure Reg

flb51506-1-S-T
Fuelab 515 TBI Adjustable FPR 10-25 PSI (2) -6AN In (1) -6AN Return - Black
1.678,95 € excl. VAT

FUELAB Fuel Pressure Reg

flb54502-5-T
Fuelab 545 TBI Adjustable Mini FPR In-Line 10-25 PSI (1) -6AN In (1) -6AN Return - Gold
1.517,91 € excl. VAT

FUELAB Fuel Pressure Reg

flb51504-6
Fuelab 515 Carb Adjustable FPR 4-12 PSI (2) -6AN In (1) -6AN Return - Green
1.729,18 € excl. VAT