0

Fuel Rails

Can your factory fuel rail no longer distribute enough fuel to larger injectors? In this category you will find rails, complete rail kits, adapters and crossover lines for you who are increasing power and need an even fuel supply to all cylinders.

What does a fuel rail do?

The fuel rail carries fuel from the feed line to each fuel injector and also acts as a small pressure reservoir. A rail with a larger internal cross-section can typically maintain more stable pressure between cylinders when consumption rises at higher power or boost. On V engines, a crossover line often connects the two sides, e.g. in DeatschWerks' rails for Ford Mustang / F-150 Coyote 5.0 V8 with crossover.

How to choose a fuel rail

  • Fitment: many rails are made for one specific engine, e.g. Radium Engineering Toyota 1JZ-GTE VVT-I Fuel Rail. Check the engine code and intake manifold.
  • Injectors: injector mounting dimensions and injector type must match the rail. Otherwise, fuel injector adapters may be the solution.
  • Connections: check the fitting type and thread for the feed line and any return line.
  • Regulator: some kits come with a pressure regulator, others assume you already have one.
  • Fuel: if you run ethanol, the rail and seals must be able to handle it – this depends on the product.

Installation and maintenance

Use new injector seals and O-rings, and pressure-test the system for leaks before starting the engine. Check the connections again after the first few drives. Brands in this category include Aeromotive, FAST, Edelbrock, Radium Engineering and DeatschWerks. If more of the system needs upgrading, you will find the other parts under fuel injection.

Frequently asked questions

Do I need to replace the fuel rail when I fit larger injectors?

Not always. It depends on your power target, the injector dimensions and whether the stock rail can maintain stable pressure to all cylinders. For bigger builds, a rail with a larger cross-section and better connections can provide more even distribution.

Can I reuse the old O-rings during installation?

We do not recommend it. Old O-rings may be hardened or deformed and cause leaks, resulting in a fire risk. Use new seals that fit the injectors and rail and that are compatible with the fuel type you run.

Does a new fuel rail need to be approved for inspection?

It depends on the product, the car and the overall project. Changes to the fuel system can matter at inspection, so check the requirements for the specific part number and your car before installing the part.

View as Grid List
Sort by
Display per page

AEM Hi Vol Fuel Rail 25-100BK – sort – til Acura B18

aem25-100BK
AEM High Volume Fuel Rail 25-100BK er en sort anodiseret billet aluminium brændstofskinne designet til Acura B18B1, B18C1 og B18C5 motorer. Den har et 13 mm bore, der effektivt dæmper tilbagetrykspulser fra større injektorer og understøtter op til 1.000 hk.
1.370,73 € excl. VAT

AEM Hi Vol Fuel Rail 25-109BK – Honda D16Y7/D16Y8 – sort

aem25-109BK
AEM High Volume Fuel Rail 25-109BK til Honda D16Y7 og D16Y8 motorer er CNC-fræset af billet aluminium og sort anodiseret for høj korrosionsmodstand. Den har et 13 mm bore, der effektivt dæmper tilbage-trykspulser fra større injektorer og understøtter et brændstofflow, der kan klare op til 1.000 hk.
1.487,81 € excl. VAT