0

Gauge Accessories

Where should your new boost gauge go so you can read it without taking your eyes off the road? In this category we bring together pods, mounts and bezel accessories that give extra gauges a proper home in the A-pillar, on the steering column or elsewhere in the cabin. This category is for you if you are expanding your build with more gauges.

Pods, mounts and bezels – what do they do?

A gauge pod is a moulded housing that can replace or cover an original panel, e.g. in the A-pillar or around the steering column, and has room for one, two or three gauges. Gauge mounts are often more universal, e.g. a 52 mm gauge cup in black or carbon fibre that can be placed wherever there is space. Gauge bezel accessories change the visible rim around the gauge.

How to choose the right solution

  • Diameter: The opening must fit the gauge. In this category you will mainly find 2-1/16" (52 mm) and 2-5/8" (approx. 67 mm).
  • Car model and year: Vehicle-specific pods are shaped to a particular interior, e.g. Honda Accord 98-02 or Nissan 300ZX 90-96. Read any exceptions in the product name, e.g. parts for Dodge Ram 94-02 that do not fit the 2002 1500.
  • Number and side: Choose a single, dual or triple pod, and check whether the part is for the right or left side.
  • Readability: Place the gauges you need to react to quickly, e.g. boost pressure, closest to your line of sight.

Vehicle-specific solutions are available from brands such as AutoMeter and BLOX Racing, and the category also includes parts from Banks Power, Turbosmart and Alta.

Installation and compatibility

Make sure the gauges you choose from our individual gauges have the correct diameter and mounting depth, so there is room for connectors, hoses and wiring behind the pod. Vehicle-specific pods can typically be installed with minimal modification, while universal mounts may require drilling or adjustment. Route wiring and hoses clear of the pedals and steering column, and be aware of curtain airbags in the A-pillar. Whether the modification matters at a vehicle inspection depends on the car and the placement.

Frequently asked questions

What is the difference between a gauge pod and a gauge mount?

A pod is typically shaped to fit a specific location in a specific car, e.g. the A-pillar or the steering column. A mount or gauge cup is more universal and can be placed more freely, but often requires more adjustment to look neat.

Does a 52 mm gauge fit a 2-1/16" pod?

Normally yes, as 2-1/16 inches equals approx. 52 mm. Still check the gauge's mounting depth and the bezel design, as these can vary, and there must be room for connectors and hoses behind it.

Can an A-pillar pod affect the airbag?

It can if the car has a curtain airbag behind the pillar trim. Check the car's construction and the product's installation instructions, and never install anything that could block the airbag from deploying. If in doubt, have a workshop assess it.

View as Grid List
Sort by
Display per page

PANEL MALIBU/EL CAMINO/ MONTE CARLO

atm2143
Autometer Mounting Solutions Gauge Mount Direct Fit (5in x 2 / 2-5/8in x 4) 82-87 Chevrolet Malibu
3.897,99 € excl. VAT

PANEL PLYMOUTH "A" BODY 70-76 3-3/8 &

atm2141
Autometer 70-76 Dodge Duster/Demon/Dart Gauge Mount (Fits Two 3-3/8in / Four 2-1/16in Gauges)
2.440,12 € excl. VAT

PANEL PONTIAC FIREBIRD 70-81 3-3/8" &

atm2138
Autometer Mounting Solutions Gauge Mount Direct Fit (3-3/8in x 2 / 2-1/16 x 4)70-81 Pontiac Firebird
2.226,89 € excl. VAT

ROLL POD 2-1/16" GAUGE MNT FOR 2" ROLL

atm48012
Autometer 2-1/16in inch Black Roll Pod Gauge Mount for 2 inch Roll Cage
476,00 € excl. VAT

ROLL POD 2-5/8" GAUGE MNT FOR 1-1/2"

atm48001
AutoMeter Gauge Mount Roll Pod For 1.5in. Roll Cage Fits 2-5/8in. Gauge Black
534,82 € excl. VAT

ROLL POD 2-5/8" GAUGE MNT FOR 1-3/4"

atm48007
AutoMeter Gauge Mount Roll Pod For 1.75in. Roll Cage Fits 2-5/8in. Gauge Black
535,00 € excl. VAT

ROLL POD 2-5/8" GAUGE MNT FOR 1-5/8"

atm48004
Autometer 2 5/8 inch Black Roll Pod for 1 5/8 inch Roll Cage
541,44 € excl. VAT

ROLL POD, PEDESTAL MNT FOR TACH

atm48011
Autometer Black 5in Gauge Pedestal Mount for Tachometers
512,31 € excl. VAT

ROLL POD, SUCTION MOUNT

atm5231
Autometer D-PIC Mobile Suction Mount w/ 12v Accy Plug
476,49 € excl. VAT

ROLL POD, TACH MNT FOR 1-1/2" ROLL CAGE

atm48002
Autometer 5in Pedestal Tach Black Roll Pod for 1 1/2 inch Roll Cage
533,36 € excl. VAT

ROLL POD, TACH MNT FOR 1-3/4" ROLL CAGE

atm48008
AutoMeter Gauge Mount Roll Pod For 1.75in. Roll Cage Fits 5in. Pedestal Tach Black
532,75 € excl. VAT

ROLL POD, TACH MNT FOR 1-5/8" ROLL CAGE

atm48005
AutoMeter Gauge Mount Roll Pod For 1.625in. Roll Cage Fits 5in. Pedestal Tach Black
534,03 € excl. VAT

TACH MOUNTING BRACKET

atm5265
Autometer 3 3/4in. & 5in. Pedestal Tachometer Mounting Base - Extended Length
229,21 € excl. VAT

UNIVERSAL TRIPLE 2-1/16" DASH POD

atm5288
Autometer Triple 52mm Universal Fit Dash Top Pod
1.085,14 € excl. VAT