0

Harmonic Balancers

Do you feel vibrations at high revs, or does the crankshaft need protecting in a build with more power? In this category we bring together crankshaft harmonic balancers, elastomer kits and mounting hardware for you who want to keep torsional vibrations down in a tuned or rebuilt engine.

What does a crankshaft harmonic balancer do?

The crankshaft twists slightly with every combustion event, and at certain rpm these torsional vibrations can amplify each other. A damper on the front end of the crank absorbs some of that energy, so the load on the crankshaft and bearings typically drops. More power, higher revs or lighter rotating parts can change the vibrations, so the original damper is not necessarily right for your project. Under harmonic balancers you will find the dampers themselves, while bolts and other parts are found under harmonic balancer hardware. The brands in this category are ATI and Fluidampr.

How to choose the right damper

  • Engine: The damper must fit the specific engine – for example, ATI dampers are available for Honda K20, Nissan VQ35HR and Subaru EJ20, EJ22 and EJ25.
  • Diameter and belt grooves: The number of grooves, e.g. 4, 6 or 7, and the diameter must match the drive belt and the rest of the belt system.
  • Drive ratio: Some versions make the accessories run slower or faster than stock, e.g. 4 percent underdrive or 7 percent overdrive. This affects the alternator, water pump and power steering pump.
  • Use: Power, rev range and whether the car is driven on the street or the track determine which design makes sense.

Installation and maintenance

The damper is installed using the tools and tightening torque specified by the manufacturer, and the bolt may need to be replaced. Check the belt and pulleys at the same time. For ATI dampers, elastomer kits with 2 or 3 rings are available in various combinations, so the rings can be renewed after wear. Inspect elastomer dampers for cracks and displacement between hub and ring, especially after hard use. If you switch to a different crankshaft, the damper should be part of the assessment.

Frequently asked questions

When should the harmonic balancer be replaced?

Cracks, dried-out or protruding rubber, misaligned marks between hub and ring or a belt that runs out of line can be signs of wear. If you increase power or revs significantly, it is also worth assessing the damper.

What does the percentage in the product name mean?

It indicates how much the damper's pulley makes the accessories run slower (underdrive) or faster (overdrive) than stock. A lower drive ratio can affect charging and cooling at idle, so choose based on how the car is used.

Can I reuse the old crank bolt?

It depends on the engine and manufacturer. Some crank bolts are designed for single use and must be replaced during installation. Check the manufacturer's instructions and tightening torque for your specific engine.

What is an elastomer kit?

A set of replacement rings for ATI dampers, available with 2 or 3 rings in various combinations. The kit must match the specific damper, so check the designation on your damper before ordering.

View as Grid List
Sort by
Display per page

Fluidampr Performance Damper

fdr610931
Fluidampr 94-99 Nissan Skyline R33 RB25DET (Non NEO) Steel Internally Balanced Damper
3.900,25 € excl. VAT

Fluidampr Performance Damper

fdr630931
Fluidampr 95-98 Nissan 200SX 2.0L SR20DE/SR20DET Steel Internally Balanced Damper
3.857,01 € excl. VAT

Fluidampr Performance Damper

fdr750201
Fluidampr Ford Godzilla 7.3L Steel Internally Balanced Damper
5.358,31 € excl. VAT

Fluidampr Performance Damper

fdr760151
Fluidampr 19-22 GM/Chevy Duramax L8T Steel Externally Balanced Damper
4.397,18 € excl. VAT

Fluidampr Performance Damper

fdr840302
Fluidampr 15-21 Dodge Hellcat Charger/Challenger 6.2L Supercharged Steel Internally Balanced Damper
4.706,36 € excl. VAT

Fluidampr Performance Damper

fdr720321
Fluidampr Chrysler 331 354 392 CID V-8 Early Hemi Steel Internally Balanced Damper
3.920,87 € excl. VAT

Fluidampr Performance Damper

fdr720301
Fluidampr Chrysler A/LA 318 340 / 360 CID V-8 Steel Internally Balanced Damper
4.507,19 € excl. VAT

Fluidampr Performance Damper

fdr630701
Fluidampr Mitsubishi 4G63/T DSM I-4 Steel Internally Balanced Damper
3.404,96 € excl. VAT

Fluidampr Performance Damper

fdr650211
Fluidampr Ford 289, 302, 351 / 400 CID V8 External balance (w/ 28oz CW) Steel Balanced Damper
4.215,76 € excl. VAT

Fluidampr Performance Damper

fdr610911
Fluidampr Nissan RB26DET Phase-2 BCNR33 GT-R / BNR-34 GT-R Steel Internally Balanced Damper
3.901,53 € excl. VAT

Fluidampr Performance Damper

fdr720311
Fluidampr Chrysler B/RB 383 426 440 CID 426 Hemi Steel Internally Balanced Damper
4.312,09 € excl. VAT

Fluidampr Performance Damper

fdr843301
Fluidampr 96-06 BMW M52/M54 I6 Steel Internally Balanced Damper
5.045,48 € excl. VAT

Fluidampr Performance Damper

fdr843311
Fluidampr 91-95 BMW M50 I6 Steel Internally Balanced Damper
5.619,88 € excl. VAT

Fluidampr Performance Damper

fdr610921
Fluidampr Nissan RB20DET/RB25DET NEO Phase-1 BNR32 GT-R Steel Internally Balanced Damper
3.903,54 € excl. VAT