0

Intake Manifolds

How evenly does the air reach each cylinder, and how freely does the throttle let it through? In this category we bring together intake manifolds, plenums, throttle bodies and spacers for you who want to change the airflow in your project or replace an original part with a different design.

What do the intake parts do?

The intake manifold distributes the air from the throttle body to the cylinders. Runner length, runner diameter and plenum volume typically affect the rev range in which the engine pulls best. From Skunk2 Racing, for example, you will find manifolds and plenums with centre or side feed, and the position of the inlet can affect the distribution between the cylinders. The throttle body regulates the amount of air, and aFe, for example, offers throttle bodies from 76 to 90 mm. Throttle or manifold spacers can affect the airflow and, depending on the material, reduce heat transfer from the engine. Other brands in the category include Edelbrock, Wehrli and S&S Cycle.

How to choose a manifold and throttle body

Consider several factors together – size alone does not determine performance:

  • Rev range: longer runners can typically strengthen pull lower down, while shorter runners and a larger plenum often move performance higher up the rev range.
  • Throttle diameter: it must match the manifold, hoses and the engine's air demand; an oversized throttle can give less precise throttle response.
  • Engine management: a changed air volume may require adjustment of the engine management and possibly of the fuel injection.
  • Boost pressure: on engines with a turbo or supercharger, the manifold and gaskets must be able to withstand the pressure.
  • Space: check the clearance to the bonnet, hoses and wiring.

Installation and maintenance

Fitment depends on engine code, model year and other modifications, so always compare the product description with your engine. Use new gaskets, tighten to the specified torque and check for vacuum leaks after installation, as leaks can cause a rough idle. Clean deposits from the throttle at regular intervals. For a complete intake setup, you can combine with air intakes and airboxes.

Frequently asked questions

Does a larger throttle body require engine management tuning?

It depends on the car and the engine management. Some engines adapt by themselves within certain limits, while others may get a rough idle or fault codes without tuning. Check the product description and plan for any calibration.

What is the difference between a centre-feed and a side-feed plenum?

The difference is where the air enters the plenum. The position can affect how evenly the air is distributed between the cylinders and how the part fits in the engine bay. The choice depends on the engine, the space available and the rest of the intake.

Can I drive on the road with a modified intake manifold or a different throttle body?

It depends on the product and the car. Changes to the intake can affect emissions and may need to be approved at inspection. Check the approval for the specific part number before fitting the part to a registered car.

Why does the engine run unevenly after installation?

This is often caused by a vacuum leak from a leaking gasket or hose, or by the engine management not being adapted to the new air volume. Check seals and tightening, and read out any fault codes.

View as Grid List
Sort by
Display per page

INTK CARB KT

ede2037
Edelbrock Manifold And Carb Kit Performer RPM Ford FE Natural Finish
10.988,47 € excl. VAT

INTK CARB KT

ede2033
Edelbrock Manifold And Carb Kit Performer RPM Air-Gap Small Block Ford 289-302 Natural Finish
8.603,02 € excl. VAT

INTK CARB KT

ede2028
Edelbrock Manifold And Carb Kit Performer RPM Small Block Chevrolet Vortec Natural Finish
8.406,77 € excl. VAT

INTK CARB KT

ede2064
Edelbrock Manifold And Carb Kit Performer RPM Air-Gap Big Block Chevrolet Rectangle Port
9.053,18 € excl. VAT

INTK CARB KT

ede2029
Edelbrock Manifold And Carb Kit Performer RPM Air Gap Small Block Chevrolet Vortec Natural Finish
8.707,08 € excl. VAT

INTK CARB KT

ede2075
Edelbrock Manifold And Carb Kit Performer RPM Air-Gap Small Block Chrysler Natural Finish
8.491,61 € excl. VAT

INTK CARB KT

ede2062
Edelbrock Manifold And Carb Kit Performer RPM Big Block Chevrolet Oval Port Natural Finish
8.504,14 € excl. VAT

INTK CARB KT

ede2023
Edelbrock Manifold And Carb Kit Performer RPM Small Block Chevrolet 1957-1986 Natural Finish
8.681,36 € excl. VAT

INTK CARB KT

ede2007
Edelbrock Manifold and Carb Kit Performer SBC Vortec Natural Finish
8.990,54 € excl. VAT

INTK CARB KT

ede2063
Edelbrock Manifold And Carb Kit Performer RPM Air-Gap Big Block Chevrolet Oval Port Natural Finish
8.955,52 € excl. VAT

INTK CARB KT

ede2020
Edelbrock Manifold And Carb Kit Performer Air-Gap Small Block Chevrolet 1957-1986 Natural Finish
9.202,55 € excl. VAT

INTK CARB KT

ede2031
Edelbrock Manifold And Carb Kit Performer Small Block Ford 289-302 Natural Finish
8.810,71 € excl. VAT

INTK CARB KT

ede2056
Edelbrock Manifold And Carb Kit Performer RPM Pontiac Natural Finish
8.757,13 € excl. VAT

INTK CARB KT

ede2032
Edelbrock Manifold And Carb Kit Performer RPM Small Block Ford 289-302 Natural Finish
9.205,53 € excl. VAT

INTK CARB KT

ede2004
Edelbrock Manifold and Carb Kit Performer RPM Air-Gap SBC 1957-1986 Natural Finish
9.293,53 € excl. VAT

IntMnfSpcr - M-9486-A52

frpM-9486-A52
Ford Racing EFI Heat Spacer .5inch Cobra Intake
849,42 € excl. VAT

IntMnfSpcr - M-9486-A53

frpM-9486-A53
Ford Racing EFI Heat Spacer 1.00inch Cobra Intake
1.012,34 € excl. VAT

LSXHR 103mm Manifold for LS7

fst146204
FAST LSXHR 103mm Black Polymer Rectangular Port LS7 Intake Manifold
10.166,97 € excl. VAT

LSXHRShortVelocityStackSet

fst146074-8
FAST LSXHR 103mm Intake Manifold Short Velocity Stack Set
1.059,78 € excl. VAT

LSXr 102mm LS1/2/6 Intake + T-Body Kit

fst146302B-KIT
FAST LSXR Manifold 102MM LS1/2/6 Intake Manifold Kit - Black
12.709,86 € excl. VAT

LSXr 102mm LS3/L92 Intake + T-Body Kit

fst146102B-KIT
FAST LSXR 102MM Rect Port Intake Manifold - Black w/ 102MM Big Mouth Billet Throttle Body (Kit)
11.838,07 € excl. VAT

LSXr 102mm LS7 Intake + T-Body Kit

fst146202B-KIT
FAST Throttle Body / Manifold Kit, 102 Mm Throttle Body W/ 102Mm Blackls7 Manifold
11.690,47 € excl. VAT

LSXr 92mm Intake Upper Shell

fst54039BUS
FAST Manifold Upper Shell 92mm - Black
3.646,83 € excl. VAT

LSXrt 102mm High HP Intake

fst146105B
FAST LSXRT Manifold LS3 102MM High HP Runner - Black
10.501,39 € excl. VAT