0

Mufflers & Resonators

Does your exhaust drone annoyingly on the motorway, or does your car sound too tame when you put your foot down? Mufflers and resonators shape the sound of the exhaust system. We bring together the parts for you who want to replace a worn original muffler, change the sound character or build a new system for your project.

The difference between a muffler and a resonator

A muffler reduces the overall sound level of the exhaust, typically using chambers, perforated tubes or sound-absorbing material. A resonator targets specific frequencies and can remove the drone that can occur at a constant cruising speed. Many systems use both, so the sound can be powerful under acceleration and calmer on the open road. How the result sounds depends on the entire exhaust system, the engine and the placement under the car.

How to choose a muffler

Measure your existing system before you choose. The product names typically state the most important dimensions, e.g. Flowmaster 2.5 IN(O)/OUT(C) Super 10 SS Muffler, where O and C stand for offset and centred inlet and outlet.

  • Pipe diameter: the inlet and outlet must match your pipes, otherwise an adapter is required.
  • Inlet and outlet position: centred or offset determines how the piping can be routed.
  • Body and length: the muffler must fit under the car with clearance to the floor, tank and rear axle. For example, the aFe ATLAS Muffler is listed with a round body, 7 inches in diameter and 16 inches long.
  • Sound character: the sound varies between series and models from e.g. Flowmaster, Borla and Magnaflow, so read the description for the specific part number.
  • Material: several models are made of stainless steel, which typically resists corrosion better than ordinary steel.

Installation, inspection and maintenance

Welded joints typically give the tightest fit, while clamps make it easier to adjust and replace the parts later. Check hangers and heat shields so the muffler does not hit the floor or transfer vibrations to the body. A freer-flowing muffler can raise the sound level, and whether it can pass inspection depends on the product and the car. So check the noise requirements and any approval for the specific part number. Replace the muffler if it rattles inside or has rusted through.

Frequently asked questions

Should I choose a muffler or a resonator?

It depends on your goal. If you want to change the overall sound level, the muffler is the key choice. If the problem is a drone at certain revs or cruising speed, a resonator can typically help. Many systems combine both.

What do O and C mean in the product names?

O stands for offset and C for centred position of the inlet or outlet. For example, a Flowmaster 2.5 IN(O)/OUT(C) has an offset inlet and a centred outlet. The position must match the piping under your car.

Can my car pass inspection with a new muffler?

It depends on the product and the car. A freer-flowing muffler can result in a higher sound level than permitted. Check the noise requirements and any approval for the specific part number before you install it.

Why does my car drone after fitting a new muffler?

A drone at cruising speed can be caused by the new muffler amplifying certain frequencies, or by a resonator having been removed. It can also come from pipes touching the floor. Check the hangers and consider a resonator.

View as Grid List
Sort by
Display per page

Resonator

corPKM2004
Corsa 304 Stainless Steel 2.50in Pro Series Packed Resonator (Slip Fit) (6-8DB) - Brushed
1.320,07 € excl. VAT

Resonator

corPKM2007
Corsa 304 Stainless Steel 2.75in Pro Series Packed Resonator (Slip Fit) (2-3DB) w/ 2 Clamps
1.273,12 € excl. VAT

Resonator

corPKM2020
Corsa Pro-Series 304SS Packed Resonator - 3.0in Dual Inlet / Dual Outlet - 19in OAL
2.823,63 € excl. VAT

Resonator

corPKM2005
Corsa 304 Stainless Steel 2.50in Pro Series Packed Resonator (Slip Fit) (6-8DB) w/ 2 Clamps
1.419,75 € excl. VAT

Resonator

corPKM2006
Corsa 304 Stainless Steel 2.75in Pro Series Packed Resonator (Slip Fit) (2-3DB) - Brushed
1.220,40 € excl. VAT

Resonator Delete Kit

cor14845
Corsa 2015-2020 Ford F-150 5.0L V8 163.7in Wheelbase 2.5in Resonator Delete Kit
3.912,29 € excl. VAT

Resonator Delete Kit

cor14757
Corsa 2011-14 Ford F-150 Raptor 6.2L V8 133in Wheelbase Xtreme Cat-Back Resonator Delete Kit Exhaust
2.882,68 € excl. VAT

Resonator Delete Kit

cor14756
Corsa 2011-2014 Ford F-150 6.2L V8 156.5in Wheelbase 3in Resonator Delete Kit
3.509,99 € excl. VAT

Resonator Delete Kit

cor14754
Corsa 2011-2014 Ford F-150 3.5L V6/5.0L V8 163.1in Wheelbase 3in Resonator Delete Kit
3.408,31 € excl. VAT

Resonator Delete Kit

cor14840
Corsa 2015-2020 Ford F-150 3.5L Ecoboost 145in Wheelbase 3in Resonator Delete Kit
5.106,29 € excl. VAT

Resonator Delete Kit

cor14753
Corsa 2011-2014 Ford F-150 3.5L V6/5.0L V8 156.5in Wheelbase 3in Resonator Delete Kit
3.509,99 € excl. VAT

Resonator Delete Kit

cor14755
Corsa 2011-2014 Ford F-150 6.2L V8 144.5in Wheelbase 3in Resonator Delete Kit
3.208,10 € excl. VAT

RESONATOR DELETE KIT M2

dnnD660-0059
Dinan 16-18 BMW M2 (F87) Resonator Delete Kit - 3.25in - Stainless Steel
3.068,65 € excl. VAT

S.S. MUFFLER W/TIP

vib1040
Vibrant StreetPower Oval Muffler w/ Dual 3.5in Round Tips Straight Cut Beveled Edge 2.5in inlet I.D.
2.349,44 € excl. VAT

S.S. MUFFLER W/TIP

vib12321
Vibrant StreetPower Flat Muffler Dual 304SS Brushed Tips 9in x 5in x 15in - 3in Dual Inlet
2.216,07 € excl. VAT

S.S. MUFFLER W/TIP

vib12320
Vibrant Streetpower Flat Blk Muffler 9x5x15in Body 2.5in Inlet ID 3in Tip OD w/Dual Straight Tips
2.121,81 € excl. VAT

S.S. MUFFLER W/TIP

vib1061
Vibrant TPV Turbo Round Muffler (17in Long) with 4in Round Tip Angle Cut - 3in inlet I.D.
1.694,64 € excl. VAT

S.S. RESONATOR

vib17995
Vibrant SS Race Muffler 5in inlet/outlet x 5in long
1.088,97 € excl. VAT

S.S. UNIV MUFFLER

vib1106
Vibrant StreetPower Oval Muff 5inx9in x 15in long Muff body 2.5in in I.D. x 2.5in out Offset-Center
1.331,57 € excl. VAT