0

Oil Seals

Is oil seeping out at the crankshaft, the camshaft or the front fork on your motorcycle? Here we gather shaft seals and other oil seals that seal around rotating and sliding shafts. You will also find fork seals, dust covers and repair sleeves for worn shaft journals. The category is for you if you are fixing a leak or renewing seals in a project.

What a shaft seal does, and why it starts to leak

A shaft seal seals where a shaft passes through a housing. This is typically done with a rubber lip that a spring holds against the shaft surface. Over time the lip can harden or crack, or it can wear a groove in the shaft, and then oil seeps out. In the category you will find crankshaft seals and camshaft seals.

How to choose the right oil seal

The new seal must match the old one on several points, not just the diameter:

  • Dimensions: inner diameter, outer diameter and width in mm, e.g. 43 x 54 x 11 on a BikeMaster fork seal.
  • Design: whether you need a single or double lip and possibly a dust lip depends on the location.
  • Material: the rubber compound must be able to withstand the oil and the temperature the seal is exposed to.
  • Shaft running surface: if the old lip has worn a groove, a new seal can leak again. A repair sleeve, a thin sleeve pressed over the shaft, gives the lip a new surface. Fel-Pro, for example, has the Shaft Repair Sleeve in the category.

Other brands in the category include Cometic Gasket, Vertex Pistons and QuadBoss.

Fork seals and installation

For motorcycles you will find fork seals and dust covers from BikeMaster in several tube diameters. The dust cover keeps dirt away from the seal. That is why it can make sense to replace both parts and the fork oil at the same time. Complete kits are found under fork seal kits. The same applies when installing any shaft seal: clean the seat, lubricate the lip with oil, and press the seal in straight with a tool that contacts the entire outer edge. A crooked or damaged lip can leak right from the first start.

Frequently asked questions

Can I reuse a shaft seal once the parts have been taken apart?

It is typically not recommended. The lip has adapted to the old running surface and can be damaged when the seal is pulled out. Since the parts are apart anyway, the safest option is to fit a new one.

How do I find the dimensions of a shaft seal?

Measure the inner diameter, outer diameter and width in millimetres, or read the dimensions on the old seal, where they are often stamped. Preferably also measure the shaft and the seat, as wear can make the old seal misleading.

Why does the fork leak again shortly after replacing the seals?

It can be caused by scratches or rust on the fork tube, dirt under the dust cover or a seal that has been fitted crooked. Check the surface of the fork tube, and replace the dust cover together with the seal.

When should I use a repair sleeve?

When the old lip has worn a visible or noticeable groove in the shaft. The sleeve is pressed over the running surface so the new shaft seal gets an even surface to seal against. Check that the sleeve dimensions fit the shaft.

View as Grid List
Sort by
Display per page

Crank Seal

pfsSM86626
Peterson Fluid Systems Chevrolet Small Block Rear Crank Seal - Double Split
753,45 € excl. VAT

Crank Seal

pfsT-16028
Peterson Fluid Systems Chevrolet LS-1 Front Crank Seal
918,14 € excl. VAT

Crank Seal

pfsSM85339
Peterson Fluid Systems Ford 358 Rear Crank Seal
823,94 € excl. VAT

Crank Seal

pfsSM86625
Peterson Fluid Systems Chevrolet Small Block Rear Crank Seal - Single Spilt
773,89 € excl. VAT

Crank Seal

pfsSM13610
Peterson Fluid Systems Ford 302 Rear Crank Seal
826,13 € excl. VAT

Crank Seal

pfsSM86665
Peterson Fluid Systems Chevrolet Big Block Rear Crank Seal
794,25 € excl. VAT

Crank Seal

pfsSM86910
Peterson Fluid Systems GM B/B Front Crank Seal
763,79 € excl. VAT

Crank Seal

pfsSM86990
Peterson Fluid Systems GM S/B Front Crank Seal
722,92 € excl. VAT

Crank Seal

pfsSM85742
Peterson Fluid Systems Ford 358 w/ 302 Rear Crank Seal
830,01 € excl. VAT

Crank Seal

pfsT-16027
Peterson Fluid Systems Chevrolet LS-1 Rear Crank Seal
982,73 € excl. VAT

Crank Seal

pfsSM85338
Peterson Fluid Systems Ford 358 Front Crank Seal
763,79 € excl. VAT