0

Oil Seals

Is oil seeping out at the crankshaft, the camshaft or the front fork on your motorcycle? Here we gather shaft seals and other oil seals that seal around rotating and sliding shafts. You will also find fork seals, dust covers and repair sleeves for worn shaft journals. The category is for you if you are fixing a leak or renewing seals in a project.

What a shaft seal does, and why it starts to leak

A shaft seal seals where a shaft passes through a housing. This is typically done with a rubber lip that a spring holds against the shaft surface. Over time the lip can harden or crack, or it can wear a groove in the shaft, and then oil seeps out. In the category you will find crankshaft seals and camshaft seals.

How to choose the right oil seal

The new seal must match the old one on several points, not just the diameter:

  • Dimensions: inner diameter, outer diameter and width in mm, e.g. 43 x 54 x 11 on a BikeMaster fork seal.
  • Design: whether you need a single or double lip and possibly a dust lip depends on the location.
  • Material: the rubber compound must be able to withstand the oil and the temperature the seal is exposed to.
  • Shaft running surface: if the old lip has worn a groove, a new seal can leak again. A repair sleeve, a thin sleeve pressed over the shaft, gives the lip a new surface. Fel-Pro, for example, has the Shaft Repair Sleeve in the category.

Other brands in the category include Cometic Gasket, Vertex Pistons and QuadBoss.

Fork seals and installation

For motorcycles you will find fork seals and dust covers from BikeMaster in several tube diameters. The dust cover keeps dirt away from the seal. That is why it can make sense to replace both parts and the fork oil at the same time. Complete kits are found under fork seal kits. The same applies when installing any shaft seal: clean the seat, lubricate the lip with oil, and press the seal in straight with a tool that contacts the entire outer edge. A crooked or damaged lip can leak right from the first start.

Frequently asked questions

Can I reuse a shaft seal once the parts have been taken apart?

It is typically not recommended. The lip has adapted to the old running surface and can be damaged when the seal is pulled out. Since the parts are apart anyway, the safest option is to fit a new one.

How do I find the dimensions of a shaft seal?

Measure the inner diameter, outer diameter and width in millimetres, or read the dimensions on the old seal, where they are often stamped. Preferably also measure the shaft and the seat, as wear can make the old seal misleading.

Why does the fork leak again shortly after replacing the seals?

It can be caused by scratches or rust on the fork tube, dirt under the dust cover or a seal that has been fitted crooked. Check the surface of the fork tube, and replace the dust cover together with the seal.

When should I use a repair sleeve?

When the old lip has worn a visible or noticeable groove in the shaft. The sleeve is pressed over the running surface so the new shaft seal gets an even surface to seal against. Check that the sleeve dimensions fit the shaft.

View as Grid List
Sort by
Display per page

Ford 351C/351M/351W V8 Rear Main Seal

cgsC5689
Cometic Ford 351W/351C 335 Series V8 / 351W Windsor V8 Viton Rear Main Seal 2 piece
314,73 € excl. VAT

Ford OHC. Windsor V8 Rear Seal

cgsC5688
Cometic Ford 1974-1981 2.3L OHC 1962-1983 221/255/260/289/302 Windsor V8 Rear Main Seal - 2 Piece
290,94 € excl. VAT

GM Duramax Rear Main Seal

cgsC15044
Cometic 01-07 GM 6.6L Duramax Rear Main Seal
590,76 € excl. VAT

GM Gen-3/4 SB V8 Rear Main Seal Kit

cgsC5172
Cometic 97-05 GM LS1 4.8/5.3/5.7/6.0L Rear Main Seal Set
578,24 € excl. VAT

GM I6/V6/Small Block V8 Rear Main Seal

cgsC5085
Cometic GM 3.2/3.8/4.1/4.8L Inline 6 3.8/4.3L V6 Chevy Gen1 SB V8 Silicone Rear Main Seal-2 Piece
157,45 € excl. VAT

GM LS Gen-3/4 Rear Seal Cover Gasket

cgsCP15281
Cometic GM LS Gen-3/4 Rear Main Seal Cover Gasket - 10 Pack
1.799,11 € excl. VAT

Hond 02-08 CRF450R Oil Seal Kit

cgsC3047OS
Cometic 02-08 Honda CRF450 Oil Seal Kit
398,83 € excl. VAT

Hond 05-17 CRF450X Oil Seal Kit

cgsC3134OS
Cometic 05-13 Honda CRF450X Oil Seal Kit
373,90 € excl. VAT

Hond 09-16 CRF450R Oil Seal Kit

cgsC3270OS
Cometic 09-16 Honda CRF450R Oil Seal Kit
347,14 € excl. VAT

Hond 84-91 CR250R Crank Seal Kit

cgsC7697
Cometic 84-91 Honda CR250 Crankshaft Oil Seal Kit
182,75 € excl. VAT

Hond 85-86 CR250R Oil Seal Kit

cgsC7013OS
Cometic 85-86 Honda CR250 Oil Seal Kit
332,78 € excl. VAT

Hond 86-02 CR80R, CR85R Oil Kit

cgsC7126OS
Cometic 86-02 Honda CR80 Oil Seal Kit
316,67 € excl. VAT

Hond 86-07 CR125R Crank Seal Kit

cgsC7654
Cometic 86-03 Honda CR125 Crankshaft Oil Seal Kit
173,75 € excl. VAT

Hond 89-01 CR500R Oil Seal Kit

cgsC7020OS
Cometic 89-01 Honda CR500 Oil Seal Kit
339,17 € excl. VAT

Hond 90-02 CR125R Oil Seal Kit

cgsC7010OS
Cometic 90-02 Honda CR250 Oil Seal Kit
327,73 € excl. VAT