0

Suspension Linkages

Is your suspension clunking over bumps, or are your sway bar end links preloaded after lowering or lifting? In this category we bring together sway bar end links, Panhard rods and upper trailing arms for you who want to restore correct geometry or sharpen cornering response.

What do sway bar end links and Panhard rods do?

Sway bar end links connect the sway bar to the suspension so it can counteract body roll in corners. The Panhard rod keeps a solid axle located laterally, and upper trailing arms control the axle position during compression and rebound. If the ride height is changed, the original lengths can cause preload or shift the axle. An adjustable Panhard rod, e.g. from ICON for the Ford F-250/F-350, can re-centre the axle after a lift kit, while adjustable end links can remove preload after fitting coilovers.

How to choose suspension linkages

  • Bushing type: polyurethane, as in Torque Solutions links for the Subaru WRX/STI, typically gives more precision than rubber. Ball joints give a more direct connection but can transmit more vibration and require more frequent inspection.
  • Adjustability: relevant if the ride height has been changed significantly or if you use an adjustable sway bar.
  • Fitment: the links are vehicle-specific, e.g. for the Tesla Model 3, VW/Audi MQB or Toyota Tundra. Check model year, drivetrain and ride height.

Brands in the category include Whiteline and Superpro.

Installation and maintenance

Sway bar end links are typically tightened with the suspension loaded so the sway bar is not preloaded. Ball joints and bushings wear over time, and play, clunking or cracked dust boots are signs that a link should be inspected.

Frequently asked questions

Should I choose end links with ball joints or polyurethane?

Ball joints typically give the most direct response but can create more noise and require more frequent inspection. Polyurethane typically sits between rubber and ball joints. The choice depends on how much noise and vibration you accept in daily driving.

When do I need an adjustable Panhard rod?

Typically when a solid-axle vehicle has been lifted or lowered so the axle is shifted sideways relative to the body. An adjustable rod can re-centre the axle. The need depends on how much the ride height has been changed.

Do new suspension linkages require an inspection or wheel alignment?

Whether the modification needs to be inspected depends on the product and the vehicle, so check the approval for the specific part number. Panhard rods and upper trailing arms can affect the axle position, so a wheel alignment after installation is typically a good idea.

View as Grid List
Sort by
Display per page

FABTECH FTS451 ADJUSTABLE TRACK BAR

fabFTS451
Fabtech 00-04 Ford F250/350/Excursion 4WD Adjustable Track Bar - 32.5in Extended/29in Collapsed
2.081,79 € excl. VAT

FJ/4RUNNER/GX REAR ADJ TRACK BAR KIT

ico54200
ICON 2007+ Toyota FJ / 2003+ Toyota 4Runner Rear Adj Track Bar Kit
3.344,75 € excl. VAT

Hellwig 7960

hwg7960
Hellwig Universal Adjustable Heavy Duty Sway Bar End Links 6-8in Length
1.485,55 € excl. VAT

Hotchkis 25405 End Link Set

hot25405
Hotchkis 04-07 STi Front & Rear Endlink Set
2.187,55 € excl. VAT

Hotchkis 25826 Rear Endlink Kit

hot25826
Hotchkis 99-06 BMW E46 3 Series REAR Endlink Set - REAR ONLY
2.186,64 € excl. VAT

Hotchkis 25826F Front Endlink Kit

hot25826F
Hotchkis 99-06 BMW E46 3 Series FRONT Endlink Set - FRONT ONLY
2.226,66 € excl. VAT