Universal Oil Coolers
Is your engine oil getting too hot on track days, or does your project need extra cooling after adding more power? Universal oil cooler cores give you the freedom to choose the size, placement and connections yourself when there is no ready-made kit for your car.
What does a universal oil cooler do?
An oil cooler lowers the temperature of the engine oil so it typically retains its lubricating properties better during hard driving, high boost pressure or hot weather. A universal core is typically supplied without vehicle-specific brackets and hoses, so you put together the rest of the system yourself. See also our other engine oil coolers.
How to choose an oil cooler
Size alone does not determine cooling capacity. Consider several factors:
- Rows and dimensions – e.g. 8 or 16 rows, or cores from 4 x 10 to 12 x 12 inches; more rows can increase cooling capacity, but also pressure drop.
- Connection – e.g. 10AN or M22, which must match your fittings and hoses.
- Space and airflow – the core needs fresh air and should not block the radiator or intercooler.
In this category you will find cores from brands such as Vibrant, GReddy, ISR Performance and Perrin Performance.
Installation and maintenance
Use hoses and fittings that can withstand oil temperature and pressure, and consider a thermostat so the oil is not overcooled when the engine is cold. After installation, you should check the oil level and look for leaks, as the system holds more oil than before.
Frequently asked questions
Do I need a thermostat with the oil cooler?
Typically yes, especially for daily driving in cold weather. A thermostat lets the oil reach operating temperature faster so it is not overcooled under light load.
Where should the oil cooler be placed?
Somewhere with fresh airflow, e.g. behind the bumper or in front of the radiator, protected from stones. The placement depends on the space in the car, and the core should not take air away from the radiator or intercooler.
What does the AN size on an oil cooler mean?
It indicates the size of the connection, e.g. 10AN. Hoses and fittings must be the same size or have suitable adapters, and the inner diameter also affects flow and pressure drop in the system.