Air Spring Kits
Does the rear end sag when the bed is loaded or the trailer is hooked up? Air springs and air helper springs can lift and stabilise the vehicle under load, and the pressure can be adjusted to suit the load. Here you'll find both vehicle-specific kits and individual air bags for your own project.
Vehicle-specific kits or individual air bags
This category covers two needs. Vehicle-specific kits from Firestone, such as Ride-Rite and Coil-Rite, are made for specific models and model years like the Ford Ranger, Jeep Gladiator, Chevrolet/GMC 2500/3500 and Dodge RAM 2500. They work as helper springs that supplement the original springs when the vehicle is loaded. Individual air bags from Ridetech are typically used in a project where you put together the brackets, lines and controls yourself.
How to choose air springs
- Bag type: A double convoluted bag with two folds can provide long travel at a low mounting height, while a rolling sleeve bag rolls over a piston and typically gives smoother suspension through the stroke.
- Load capacity: The capacity, e.g. 800 lb, should match the axle load when loaded. Too high a capacity can result in a harsh ride when the vehicle is driven unloaded.
- Connection: The port size, e.g. 1/4 inch, determines which fittings and lines will fit.
- Fitment: Check the model year, front or rear axle and 2WD/4WD in the product description. Several kits are available in variants such as RED Label and Ex Duty.
Installation and maintenance
The bag must have clearance from the exhaust, brake lines and sharp edges throughout its full travel. Run the minimum pressure specified by the manufacturer, even when unloaded, so the bag does not fold incorrectly and wear. Leaks can be found with soapy water on fittings and joints. If you need a compressor and controls for a complete system, see our complete air suspension kits.
Frequently asked questions
What is the difference between air helper springs and full air suspension?
Air helper springs supplement the vehicle's original springs and are typically used to keep the vehicle level under load. With full air suspension, the air bags replace the springs entirely, which typically requires a compressor, tank and controls.
What air pressure should the air springs run?
It depends on the kit and the load. Stay within the manufacturer's minimum and maximum pressure, and maintain the minimum pressure even when the vehicle is driven unloaded, so the bag does not wear or fold incorrectly.
Does the vehicle need an inspection after fitting air springs?
It depends on the product and the vehicle, and on whether the modification affects things like ground clearance or permitted load. Check the requirements and documentation for the specific part number, and ask an inspection centre before installation if you are in doubt.