0

Fittings & Hoses

Which AN size, hose type and fitting does your next fuel or oil project need? In this category we bring together hoses, lines, fittings, plugs, hose clamps, brackets, valves and complete fuel kits. The parts are for you if you are building new lines, relocating components or want leak-free connections that can handle pressure, heat and vibration in the engine bay.

How the plumbing system fits together

A line system for fuel, oil, coolant or vacuum typically consists of three parts: the hose or hard line itself, the fittings and plugs that connect the line to the pump, filter or carburettor, and the clamps and brackets that hold it in place. Check valves control the direction of flow, while shut-off valves close off a line. If you don't want to build everything from scratch, there are complete fuel system kits, e.g. DeatschWerks 6AN PTFE Fuel Line Kit for 4160-style carburettors with pressure gauge.

How to choose hoses and fittings

Start with the fluid, the pressure and the temperature. PTFE hoses are typically used for fuel, but whether a hose suits your fuel depends on the manufacturer's specification for that particular hose. Then choose the size based on the engine's flow requirements and the space you have for routing – a larger size is not automatically better.

  • AN size: e.g. 6AN, 8AN or 10AN must match the hose, the fittings and the component ports.
  • Thread type: AN, NPT, ORB and SAE seal in different ways and require an adapter to connect, e.g. Radium Engineering 10AN ORB to 6AN Male Fitting or DeatschWerks 8AN Long to 7/8-20 Carb Adapter for the carburettor inlet.
  • Angle and design: 90-degree fittings and swivel banjo fittings can shorten line runs and make installation easier in tight spaces.
  • Material and finish: must suit the fluid, the temperature and the rest of the system.

Installation and safe routing

Route the lines away from the exhaust manifold, moving parts and sharp edges, and secure them so vibration doesn't wear the hose. For this you use hose clamps and brackets, e.g. Russell Line Clamp, while protective sleeving such as Convoluted Tubing can shield against chafing. Follow the manufacturer's instructions when assembling fittings onto the hose, and pressure test the system before starting the engine. Check the connections after the first drives and then regularly for moisture, cracks and loose clamps. In this category you will find brands such as Gates, Fragola, DFC, Russell and Vibrant.

Frequently asked questions

Can I mix AN, NPT and ORB fittings?

Not directly. The thread types are different and each seals in its own way. You need an adapter with the correct type at both ends, and you should check that the sizes match both the hose and the component.

Which hose should I use for fuel?

It depends on the fuel type, pressure and temperature. PTFE hoses are typically used for fuel, but always check the manufacturer's specification for the specific hose, especially if you run ethanol-blended fuel.

How do I find the right AN size?

Look at the engine's fuel requirements, the pump and filter ports and the manufacturer's recommendation. Hose, fittings and components must match throughout the whole system; a larger size does not automatically give a better result.

Can I modify the fuel lines on a road car?

It depends on the product and the car. Check the inspection requirements and any approval for the specific part number, and make sure the lines are properly secured and routed safely away from heat and moving parts.

Fittings & Hoses
View as Grid List
Sort by
Display per page

Mishimoto MMHOSE-INT-90BK

misMMHOSE-INT-90BK
Mishimoto 90-93 Acura Integra Black Silicone Hose Kit (does NOT fit B17A1 Engine)
966,61 € excl. VAT

Mishimoto MMHOSE-INT-94BK

misMMHOSE-INT-94BK
Mishimoto 94-01 Acura Integra Black Silicone Hose Kit
964,00 € excl. VAT

Mishimoto MMHOSE-INT-97BK

misMMHOSE-INT-97BK
Mishimoto 97-01 Acura Integra Type R Black Silicone Hose Kit
1.010,52 € excl. VAT

Mishimoto MMHOSE-JLP-18ARD

misMMHOSE-JLP-18ARD
Mishimoto 2018+ Jeep Wrangler JL / Gladiator JT 3.6L AT Red Silicone Radiator Coolant Hose Kit
2.063,73 € excl. VAT

Mishimoto MMHOSE-K2-14BK

misMMHOSE-K2-14BK
Mishimoto 14+ Chevrolet Silverado 1500 Black Silicone Hose Kit
2.760,25 € excl. VAT

Mishimoto MMHOSE-K2-14BL

misMMHOSE-K2-14BL
Mishimoto 14+ Chevrolet Silverado 1500 Blue Silicone Hose Kit
2.729,30 € excl. VAT

Mishimoto MMHOSE-LIBT-05TBK

misMMHOSE-LIBT-05TBK
Mishimoto 05-06 Jeep Liberty 2.8 CRD Black Silicone Turbo Hose Kit
2.798,20 € excl. VAT

Mishimoto MMHOSE-LIBT-05TRD

misMMHOSE-LIBT-05TRD
Mishimoto 05-06 Jeep Liberty 2.8 CRD Red Silicone Turbo Hose Kit
2.790,30 € excl. VAT

Mishimoto MMHOSE-LTN-2WDBK

misMMHOSE-LTN-2WDBK
Mishimoto Ford F-150/250/Expedition Black Silicone Radiator Coolant Hose Kit
2.718,54 € excl. VAT

Mishimoto MMHOSE-MIA-90BK

misMMHOSE-MIA-90BK
Mishimoto 90-93 Mazda Miata Black Silicone Radiator Hose Kit
1.023,05 € excl. VAT

Mishimoto MMHOSE-MIA-90HHBK

misMMHOSE-MIA-90HHBK
Mishimoto 90-91 Mazda Miata Black Silicone Heater Hose Kit
871,37 € excl. VAT

Mishimoto MMHOSE-MIA-94HHBK

misMMHOSE-MIA-94HHBK
Mishimoto 94-97 Mazda Miata Black Silicone Heater Hose Kit
868,03 € excl. VAT

Mishimoto MMHOSE-MIA-99BK

misMMHOSE-MIA-99BK
Mishimoto 99-05 Mazda Miata Black Silicone Radiator Hose Kit
1.047,06 € excl. VAT

Mishimoto MMHOSE-MOP57-05BK

misMMHOSE-MOP57-05BK
Mishimoto 05-10 Mopar 5.7L V8 Black Silicone Hose Kit
1.464,39 € excl. VAT

Mishimoto MMHOSE-MOP57-11BK

misMMHOSE-MOP57-11BK
Mishimoto 2011+ Mopar LX Chassis 5.7L V8 Black Silicone Hose Kit
1.584,44 € excl. VAT

Mishimoto MMHOSE-MOP57-11RD

misMMHOSE-MOP57-11RD
Mishimoto 2011+ Mopar LX Chassis 5.7L V8 Red Silicone Hose Kit
1.583,59 € excl. VAT

Mishimoto MMHOSE-MOP61-05BK

misMMHOSE-MOP61-05BK
Mishimoto 05-10 Mopar 6.1L V8 Black Silicone Hose Kit
1.523,74 € excl. VAT

Mishimoto MMHOSE-MOP61-05RD

misMMHOSE-MOP61-05RD
Mishimoto 05-10 Mopar 6.1L V8 Red Silicone Hose Kit
1.517,42 € excl. VAT

Mishimoto MMHOSE-MOP62-15BK

misMMHOSE-MOP62-15BK
Mishimoto 2015+ Dodge Challenger / Charger SRT Hellcat Silicone Radiator Hose Kit - Black
2.032,34 € excl. VAT

Mishimoto MMHOSE-MOP62-15RD

misMMHOSE-MOP62-15RD
Mishimoto 2015+ Dodge Challenger / Charger SRT Hellcat Silicone Radiator Hose Kit - Red
2.034,84 € excl. VAT

Mishimoto MMHOSE-MOP64-11BK

misMMHOSE-MOP64-11BK
Mishimoto 2011+ Mopar LX Chassis 6.4L Hemi Black Silicone Hose Kit
1.735,63 € excl. VAT

Mishimoto MMHOSE-MR2-90BK

misMMHOSE-MR2-90BK
Mishimoto 90-99 Toyota MR2 Turbo Black Silicone Hose Kit
1.399,80 € excl. VAT

Mishimoto MMHOSE-MS3-10BK

misMMHOSE-MS3-10BK
Mishimoto 10-13 Mazdaspeed 3 2.3L Black Silicone Hose Kit
1.890,65 € excl. VAT

Mishimoto MMHOSE-MUS-11BK

misMMHOSE-MUS-11BK
Mishimoto 11-14 Ford Mustang GT 5.0L Black Silicone Hose Kit
1.362,40 € excl. VAT