0

Fittings & Hoses

Which AN size, hose type and fitting does your next fuel or oil project need? In this category we bring together hoses, lines, fittings, plugs, hose clamps, brackets, valves and complete fuel kits. The parts are for you if you are building new lines, relocating components or want leak-free connections that can handle pressure, heat and vibration in the engine bay.

How the plumbing system fits together

A line system for fuel, oil, coolant or vacuum typically consists of three parts: the hose or hard line itself, the fittings and plugs that connect the line to the pump, filter or carburettor, and the clamps and brackets that hold it in place. Check valves control the direction of flow, while shut-off valves close off a line. If you don't want to build everything from scratch, there are complete fuel system kits, e.g. DeatschWerks 6AN PTFE Fuel Line Kit for 4160-style carburettors with pressure gauge.

How to choose hoses and fittings

Start with the fluid, the pressure and the temperature. PTFE hoses are typically used for fuel, but whether a hose suits your fuel depends on the manufacturer's specification for that particular hose. Then choose the size based on the engine's flow requirements and the space you have for routing – a larger size is not automatically better.

  • AN size: e.g. 6AN, 8AN or 10AN must match the hose, the fittings and the component ports.
  • Thread type: AN, NPT, ORB and SAE seal in different ways and require an adapter to connect, e.g. Radium Engineering 10AN ORB to 6AN Male Fitting or DeatschWerks 8AN Long to 7/8-20 Carb Adapter for the carburettor inlet.
  • Angle and design: 90-degree fittings and swivel banjo fittings can shorten line runs and make installation easier in tight spaces.
  • Material and finish: must suit the fluid, the temperature and the rest of the system.

Installation and safe routing

Route the lines away from the exhaust manifold, moving parts and sharp edges, and secure them so vibration doesn't wear the hose. For this you use hose clamps and brackets, e.g. Russell Line Clamp, while protective sleeving such as Convoluted Tubing can shield against chafing. Follow the manufacturer's instructions when assembling fittings onto the hose, and pressure test the system before starting the engine. Check the connections after the first drives and then regularly for moisture, cracks and loose clamps. In this category you will find brands such as Gates, Fragola, DFC, Russell and Vibrant.

Frequently asked questions

Can I mix AN, NPT and ORB fittings?

Not directly. The thread types are different and each seals in its own way. You need an adapter with the correct type at both ends, and you should check that the sizes match both the hose and the component.

Which hose should I use for fuel?

It depends on the fuel type, pressure and temperature. PTFE hoses are typically used for fuel, but always check the manufacturer's specification for the specific hose, especially if you run ethanol-blended fuel.

How do I find the right AN size?

Look at the engine's fuel requirements, the pump and filter ports and the manufacturer's recommendation. Hose, fittings and components must match throughout the whole system; a larger size does not automatically give a better result.

Can I modify the fuel lines on a road car?

It depends on the product and the car. Check the inspection requirements and any approval for the specific part number, and make sure the lines are properly secured and routed safely away from heat and moving parts.

Fittings & Hoses
View as Grid List
Sort by
Display per page

NONEXTRUDEDALFITTING

vib21504
Vibrant -4AN 150 Degree Elbow Hose End Fitting
222,65 € excl. VAT

NONEXTRUDEDALFITTING

vib21988
Vibrant 90 Degree Elbow Forged Hose End Fitting Hose Size -8AN
249,52 € excl. VAT

NONEXTRUDEDALFITTING

vib12736
Vibrant BSPT Adapter Fitting -6 AN to 1/4in -19
103,69 € excl. VAT

NONEXTRUDEDALFITTING

vib10380
Vibrant 1/8in NPT Female Pipe Coupler Fitting - Aluminum
87,21 € excl. VAT

NONEXTRUDEDALFITTING

vib10177
Vibrant Straight Adapter Fitting Size -8AN x 3/4in NPT
96,69 € excl. VAT

NONEXTRUDEDALFITTING

vib10704
Vibrant -10AN Female Union Adapter (AN to AN)
144,75 € excl. VAT

NONEXTRUDEDALFITTING

vib11183
Vibrant Barbed Weld On Bung for 5/8in ID Hose
87,21 € excl. VAT

NONEXTRUDEDALFITTING

vib16968
Vibrant -10AN Male Flare to Male -10AN ORB Swivel 90 Degree Adapter Fitting - Anodized Black
295,44 € excl. VAT

NONEXTRUDEDALFITTING

vib21916
Vibrant -16AN 90 Degree Elbow Hose End Fitting
324,82 € excl. VAT

NONEXTRUDEDALFITTING

vib10775
Vibrant -12AN Female to -12AN Male 45 Degree Swivel Adapter Fitting
314,17 € excl. VAT

NONEXTRUDEDALFITTING

vib11510
Vibrant -4AN Male Banjo Fitting 8mm x 1.0 Metric Aluminum + 2 Washers
265,88 € excl. VAT

NONEXTRUDEDALFITTING

vib10257
Vibrant -6AN to 1/8in NPT 90 Degree Elbow Adapter Fitting
119,81 € excl. VAT

NONEXTRUDEDALFITTING

vib10687
Vibrant -20AN Flare Straight Bulkhead Adapter Fitting - Aluminum
335,83 € excl. VAT

NONEXTRUDEDALFITTING

vib10250A
Vibrant -3AN to 1/8in NPT 90 Degree Elbow Adapter Fitting
108,62 € excl. VAT

NONEXTRUDEDALFITTING

vib10786
Vibrant -16AN Female to -16AN Male 90 Degree Swivel Adapter Fitting
436,60 € excl. VAT

NONEXTRUDEDALFITTING

vib16877
Vibrant 90 Degree Aluminum AN to Male Quick Connect Fitting -8AN - 0.375in Barb Size
213,16 € excl. VAT

NONEXTRUDEDALFITTING

vib21910
Vibrant -10AN 90 Degree Elbow Hose End Fitting
244,12 € excl. VAT

NONEXTRUDEDALFITTING

vib10444
Vibrant -10AN Flare Plugs - Aluminum
85,02 € excl. VAT

NONEXTRUDEDALFITTING

vib10811
Vibrant -12AN x -10AN x -10AN Y-Adapter Fitting - Aluminum
434,71 € excl. VAT

NONEXTRUDEDALFITTING

vib16610
Vibrant -4AN to 16x1.5mm Adapter Fitting w/Washer
107,46 € excl. VAT

NONEXTRUDEDALFITTING

vib21804
Vibrant -4AN 180 Degree Elbow Hose End Fitting
248,73 € excl. VAT

NONEXTRUDEDALFITTING

vib10733
Vibrant -8AN Female 90 Degree Union Adapter (AN to AN) - Anodized Black Only
216,87 € excl. VAT

NONEXTRUDEDALFITTING

vib10763
Vibrant -8AN Tube Sleeve Fitting - Aluminum
70,24 € excl. VAT

NONEXTRUDEDALFITTING

vib10441
Vibrant -4AN Flare Plugs - Aluminum
70,24 € excl. VAT