0

Gaskets & Seals

Is your engine sweating oil at a joint, or does the cylinder head need to come off during a project? Gaskets and seals keep oil, coolant, combustion gases and compression where they belong between the parts of the engine, exhaust and drivetrain. The category covers everything from oil seals and O-rings to complete gasket kits and gasket material for both daily drivers and tuned projects.

What gaskets and seals do

A gasket fills the small irregularities between two surfaces so the joint stays sealed under pressure and heat. Among engine gaskets and seals you will find, for example, head gaskets, intake manifold gasket kits, oil filter housing gaskets and timing belt cover seals. Rotating shafts are typically sealed with oil seals, while O-rings are used in fittings and housings, for example. For the drivetrain there are separate groups for gearbox, differential and transfer case.

How to choose the right gasket

Start with the engine code or the part number of the original part – fitment depends on engine and model year, not just the car model. Then consider:

  • Thickness: A head gasket affects the compression ratio, so the thickness should be chosen based on the engine build and any decking or resurfacing of the cylinder head or block.
  • Bore: With larger pistons, the gasket bore must match the new cylinder diameter, e.g. 83.5 mm on a Cometic head gasket for the Audi 2.5 TFSI.
  • Material: Multi-layer steel (MLS) gaskets can typically handle higher cylinder pressure and boost than soft gaskets, but often require flat surfaces with the correct surface finish.
  • Single part or kit: If several joints need to be opened, a complete kit, such as the Fel-Pro intake manifold kits for the Ford Mustang and Dodge Challenger, can ensure you are not missing a single gasket.

Exhaust, installation and gasket material

Exhaust gaskets sit at the exhaust manifold, headers and flange joints, where heat and vibration put them under heavy stress. New headers may require different gaskets than the originals, so check the flange shape. When installing: clean the surfaces thoroughly, check them for warping, and tighten to the manufacturer's torque and sequence. If no ready-made gasket is available, you can cut your own from gasket material sheets, e.g. for covers and low-pressure flanges.

Brands and engines in the category

Brands include Cometic Gasket, Fel-Pro, Victor Reinz, Vertex Pistons and Wiseco. The range includes parts for engines such as the Ford 302/351W and 4.6/5.4L V8, Nissan RB20/RB26DETT and Audi 2.5 TFSI, as well as a few motorcycle and ATV engines such as the Yamaha YFZ450R.

Frequently asked questions

Can I reuse an old gasket?

It is generally not recommended. A gasket is compressed and conforms to the surfaces on first installation, so it rarely seals as well a second time. This applies especially to head and exhaust gaskets, where pressure and heat are highest.

How do I choose the thickness of a head gasket?

The thickness affects the compression ratio and the clearance between piston and cylinder head. If the head or block has been resurfaced, or different pistons have been fitted, the thickness should be calculated from the actual measurements rather than just the original spec.

Should I use gasket sealant with a new gasket?

It depends on the gasket and the manufacturer's instructions. Many multi-layer steel and coated gaskets should be installed dry, while certain joints, e.g. where two parts meet at a corner, may require a small amount of sealant.

Why is a new gasket leaking?

Typical causes are warped or dirty surfaces, incorrect torque or tightening sequence, reused bolts or a gasket that does not fit the specific engine. Check the surfaces and the engine code before you install a new one.

Gaskets & Seals
View as Grid List
Sort by
Display per page

BMW M50B20/M50B20TU Cylinder Head

cgsC4332-120
Cometic BMW M50B20 Engine 82mm .120 inch MLS Head Gasket 320i/520i 89-98
1.962,90 € excl. VAT

BMW M50B20/M50B20TU Cylinder Head

cgsC4332-045
Cometic Gasket BMW M50B20/M50B20TU .045in MLS Cylinder Head Gasket - 82mm Bore
1.779,66 € excl. VAT

BMW M50B20/M50B20TU Cylinder Head

cgsC4332-030
Cometic Gasket BMW M50B20/M50B20TU .030in MLS Cylinder Head Gasket - 82mm Bore
1.777,04 € excl. VAT

BMW N14/N18 Cylinder Head Gasket

cgsC4617-050
Cometic Gasket BMW N14B16A/N14B16C/N18B16A/N18B16C .050in MLX Cylinder Head Gasket - 78mm Bore
1.013,26 € excl. VAT

BMW N14/N18 Cylinder Head Gasket

cgsC4617-032
Cometic 07-12 Mini Cooper 1.6L Turbo 78mm .032 inch MLX Head Gasket
841,51 € excl. VAT

BMW N14/N18 Cylinder Head Gasket

cgsC4617-048
Cometic Gasket BMW N14B16A/N14B16C/N18B16A/N18B16C .048in MLX Cylinder Head Gasket - 78mm Bore
1.013,26 € excl. VAT

BMW N14/N18 Cylinder Head Gasket

cgsC4617-040
Cometic Gasket BMW N14B16A/N14B16C/N18B16A/N18B16C .040in MLX Cylinder Head Gasket - 78mm Bore
837,44 € excl. VAT

BMW N55 Cylinder Head Gasket

cgsC15476-060
Cometic BMW N55B30A 85mm .060 inch MLX Head Gasket
1.518,52 € excl. VAT

BMW N55 Cylinder Head Gasket

cgsC15476-052
Cometic BMW N55B30A 85mm .052 inch MLX Head Gasket
1.545,51 € excl. VAT

BMW N55 Cylinder Head Gasket

cgsC15476-044
Cometic BMW N55B30A 85mm Bore .044in MLX Head Gasket
1.516,94 € excl. VAT

BMW S38B35/S38B36 Cylinder Head Gasket

cgsC4478-089
Cometic BMW M30/S38B35 84-92 95mm .089 inch MLS Head Gasket M5/M5i/M6
1.679,00 € excl. VAT

BMW S55B30T0 Cylinder Head Gasket

cgsC14133-052
Cometic 15-21 BMW M2 M3 M4 S55B30T0 85mm Bore .052 In MLX Cylinder Head Gasket
1.532,74 € excl. VAT

BMW S65B40 Cylinder Head Gasket

cgsC5111-080
Cometic BMW 4.0L 07-08 93mm Bore .080 inch MLS Head Gasket
1.478,49 € excl. VAT

BMW T16b3/T16b4 Tritec Cylinder Head

cgsC4308-120
Cometic BMW Mini Cooper 78.5mm .120 inch MLS Head Gasket
1.743,65 € excl. VAT

BMW T16b3/T16b4 Tritec Cylinder Head

cgsC4308-066
Cometic BMW Mini Cooper 78.5mm .066 inch MLS 5 Head Gasket
982,36 € excl. VAT

BMW T16b3/T16b4 Tritec Cylinder Head

cgsC4308-045
Cometic Gasket BMW T16b3/T16b4 Tritec .045in MLS Cylinder Head Gasket - 78.5mm Bore
836,40 € excl. VAT

BMW T16b3/T16b4 Tritec Cylinder Head

cgsC4308-075
Cometic Gasket BMW T16b3/T16b4 Tritec .075in MLS Cylinder Head Gasket - 78.5mm Bore
982,05 € excl. VAT

BMW T16b3/T16b4 Tritec Cylinder Head

cgsC4308-098
Cometic Gasket BMW T16b3/T16b4 Tritec .098in MLS Cylinder Head Gasket - 78.5mm Bore
1.063,24 € excl. VAT

BMW T16b3/T16b4 Tritec Cylinder Head

cgsC4308-051
Cometic BMW Mini Cooper 78.5mm .051 inch MLS Head Gasket
841,02 € excl. VAT

BMW T16b3/T16b4 Tritec Cylinder Head

cgsC4308-030
Cometic BMW Mini Cooper 78.5mm .030 inch MLS Head Gasket
841,02 € excl. VAT

BMW T16b3/T16b4 Tritec Cylinder Head

cgsC4308-047
Cometic Gasket BMW T16b3/T16b4 Tritec .047in MLS Cylinder Head Gasket - 78.5mm Bore
836,40 € excl. VAT

Bomb/CanA DS 650 Head Base Kit

cgsC7721
Cometic 01-04 Bombardier DS650 102mm Bore Head & Base Gasket Kit
560,18 € excl. VAT

Bomb/CanA DS 650 Head Base Kit

cgsC7722
Cometic 01-04 Bombardier DS650 105.5mm Bore Head & Base Gasket Kit
560,05 € excl. VAT