0

Gaskets & Seals

Is your engine sweating oil at a joint, or does the cylinder head need to come off during a project? Gaskets and seals keep oil, coolant, combustion gases and compression where they belong between the parts of the engine, exhaust and drivetrain. The category covers everything from oil seals and O-rings to complete gasket kits and gasket material for both daily drivers and tuned projects.

What gaskets and seals do

A gasket fills the small irregularities between two surfaces so the joint stays sealed under pressure and heat. Among engine gaskets and seals you will find, for example, head gaskets, intake manifold gasket kits, oil filter housing gaskets and timing belt cover seals. Rotating shafts are typically sealed with oil seals, while O-rings are used in fittings and housings, for example. For the drivetrain there are separate groups for gearbox, differential and transfer case.

How to choose the right gasket

Start with the engine code or the part number of the original part – fitment depends on engine and model year, not just the car model. Then consider:

  • Thickness: A head gasket affects the compression ratio, so the thickness should be chosen based on the engine build and any decking or resurfacing of the cylinder head or block.
  • Bore: With larger pistons, the gasket bore must match the new cylinder diameter, e.g. 83.5 mm on a Cometic head gasket for the Audi 2.5 TFSI.
  • Material: Multi-layer steel (MLS) gaskets can typically handle higher cylinder pressure and boost than soft gaskets, but often require flat surfaces with the correct surface finish.
  • Single part or kit: If several joints need to be opened, a complete kit, such as the Fel-Pro intake manifold kits for the Ford Mustang and Dodge Challenger, can ensure you are not missing a single gasket.

Exhaust, installation and gasket material

Exhaust gaskets sit at the exhaust manifold, headers and flange joints, where heat and vibration put them under heavy stress. New headers may require different gaskets than the originals, so check the flange shape. When installing: clean the surfaces thoroughly, check them for warping, and tighten to the manufacturer's torque and sequence. If no ready-made gasket is available, you can cut your own from gasket material sheets, e.g. for covers and low-pressure flanges.

Brands and engines in the category

Brands include Cometic Gasket, Fel-Pro, Victor Reinz, Vertex Pistons and Wiseco. The range includes parts for engines such as the Ford 302/351W and 4.6/5.4L V8, Nissan RB20/RB26DETT and Audi 2.5 TFSI, as well as a few motorcycle and ATV engines such as the Yamaha YFZ450R.

Frequently asked questions

Can I reuse an old gasket?

It is generally not recommended. A gasket is compressed and conforms to the surfaces on first installation, so it rarely seals as well a second time. This applies especially to head and exhaust gaskets, where pressure and heat are highest.

How do I choose the thickness of a head gasket?

The thickness affects the compression ratio and the clearance between piston and cylinder head. If the head or block has been resurfaced, or different pistons have been fitted, the thickness should be calculated from the actual measurements rather than just the original spec.

Should I use gasket sealant with a new gasket?

It depends on the gasket and the manufacturer's instructions. Many multi-layer steel and coated gaskets should be installed dry, while certain joints, e.g. where two parts meet at a corner, may require a small amount of sealant.

Why is a new gasket leaking?

Typical causes are warped or dirty surfaces, incorrect torque or tightening sequence, reused bolts or a gasket that does not fit the specific engine. Check the surfaces and the engine code before you install a new one.

Gaskets & Seals
View as Grid List
Sort by
Display per page

BMW 83-93 2.5/2.7L M20 Top End Kit

cgsPRO2028T-140
Cometic Gasket BMW 83-93 2.5/2.7L M20 Top End Gasket Kit - 85mm Bore - .140in MLS Cyl Head Gasket
2.644,04 € excl. VAT

BMW M10B18/M10B20 Bottom End Kit

cgsPRO2027B
Cometic Street Pro 66-88 BMW M10 1.8L/2.0L Bottom End Gasket Kit
665,38 € excl. VAT

BMW M10B18/M10B20 ExManifold Gasket

cgsC4883
Cometic Gasket BMW M10B18/M10B20 .064in AM Exhaust Manifold Gasket
165,17 € excl. VAT

BMW M10B18/M10B20 Top End Kit

cgsPRO2027T
Cometic Street Pro 66-88 BMW M10 1.8L/2.0L 90mm Top End Gasket Kit
1.867,30 € excl. VAT

BMW M10B18/M10B20 Top End Kit

cgsPRO2027T-910-051
Cometic Gasket BMW M10B18/M10B20 Top End Gasket Kit - 91mm Bore - .051in MLS Cylinder Head Gasket
1.892,35 € excl. VAT

BMW M10B18/M10B20/S14B20 Oil Pan

cgsC4796-062
Cometic Gasket BMW M10B18/M10B20/S14B20 .062in Fiber Oil Pan Gasket - Upper
287,60 € excl. VAT

BMW M20B25/M20B27 Bottom End Kit

cgsPRO2028B
Cometic Street Pro BMW 1983-93 M20 2.5/2.7L 85mm Bore Bottom End Kit
560,36 € excl. VAT

BMW M20B25/M20B27 Ex Manifold Gasket

cgsC4798-064
Cometic Gasket BMW M20B25/M20B27 .064in AM Exhaust Manifold Gasket
164,20 € excl. VAT

BMW M20B25/M20B27 Intake Manifold Gasket

cgsC4885
Cometic Gasket BMW M20B25/M20B27 .062in Fiber Intake Manifold Gasket Set
156,91 € excl. VAT

BMW M20B25/M20B27 Lower Timing Cover

cgsC14059
Cometic Gasket BMW M20B25/M20B27 .032in AFM Lower Timing Cover Gasket
108,38 € excl. VAT

BMW M20B25/M20B27 Timing Cover Kit

cgsC4803
Cometic Gasket BMW M20B25/M20B27 Timing Cover Gasket Kit
154,35 € excl. VAT

BMW M20B25/M20B27 Top End Kit

cgsPRO2028T-855-070
Cometic Gasket BMW M20B25/M20B27 Top End Gasket Kit - 85.5mm Bore - .070in MLS Cylinder Head Gasket
2.372,97 € excl. VAT

BMW M20B25/M20B27 Top End Kit

cgsPRO2028T-060
Cometic Gasket BMW M20B25/M20B27 Top End Gasket Kit - 85mm Bore - .060in MLS Cylinder Head Gasket
2.372,97 € excl. VAT

BMW M20B25/M20B27 Top End Kit

cgsPRO2028T-080
Cometic Gasket BMW M20B25/M20B27 Top End Gasket Kit - 85mm Bore - .080in MLS Cylinder Head Gasket
2.614,66 € excl. VAT

BMW M20B25/M20B27 Top End Kit

cgsPRO2028T
Cometic Street Pro BMW 1983-93 M20 2.5/2.7L 85mm Bore Top End Kit
2.333,57 € excl. VAT

BMW M20B25/M20B27 Top End Kit

cgsPRO2028T-860-070
Cometic Gasket BMW M20B25/M20B27 Top End Gasket Kit - 86mm Bore - .070in MLS Cylinder Head Gasket
2.372,97 € excl. VAT

BMW M20B25/M20B27 Top End Kit

cgsPRO2028T-840-086
Cometic Gasket BMW M20B25/M20B27 Top End Gasket Kit - 84mm Bore - .086in MLS Cylinder Head Gasket
2.614,66 € excl. VAT

BMW M30B25/M30B28 Cylinder Head Gasket

cgsC4475-098
Cometic Gasket BMW M30B25V/M30B25/M30B28V/M30B28 .098in MLS Cylinder Head Gasket - 88mm Bore
1.696,58 € excl. VAT

BMW M30B25/M30B28 Cylinder Head Gasket

cgsC4475-070
Cometic BMW M30/B25 M30/B28 73-81 88mm .070 inch MLS Head Gasket 525i/528i/728i
1.572,15 € excl. VAT

BMW M30B25/M30B28 Cylinder Head Gasket

cgsC4475-120
Cometic Gasket BMW M30B25V/M30B25/M30B28V/M30B28 .120in MLS Cylinder Head Gasket - 88mm Bore
1.814,32 € excl. VAT

BMW M30B25/M30B28 Cylinder Head Gasket

cgsC4475-080
Cometic Gasket BMW M30B25V/M30B25/M30B28V/M30B28 .080in MLS Cylinder Head Gasket - 88mm Bore
1.688,74 € excl. VAT

BMW M30B25/M30B28 Cylinder Head Gasket

cgsC4475-075
Cometic Gasket BMW M30B25V/M30B25/M30B28V/M30B28 .075in MLS Cylinder Head Gasket - 88mm Bore
1.584,14 € excl. VAT

BMW M30B25/M30B28 Cylinder Head Gasket

cgsC4475-051
Cometic Gasket BMW M30B25V/M30B25/M30B28V/M30B28 .051in MLS Cylinder Head Gasket - 88mm Bore
1.476,37 € excl. VAT

BMW M30B30/M30B32 Cylinder Head Gasket

cgsC4476-027
Cometic Gasket BMW M30B30V/M30B30/M30B32 .027in MLS Cylinder Head Gasket - 90mm Bore
1.474,05 € excl. VAT