0

Hose Clamps & Brackets

Does your intercooler hose blow off under full boost, or is coolant dripping from a joint that otherwise seems tight? Clamps and brackets keep hoses and lines secure and sealed, and we have gathered T-bolt clamps, worm gear clamps and spring-loaded clamps for charge air, coolant and AN lines – for you who are building something new or maintaining an existing project.

Three clamp types, each with its own strength

Worm gear clamps are tightened with a screw that pulls the band together and cover a wide range – e.g. the Torque Solution Worm Gear Clamp from 2.5 to 3.5 inches. T-bolt clamps have a smooth band and a bolt, which typically distributes pressure more evenly and gives a firmer grip at high boost. Spring-loaded clamps such as the Turbosmart Turbo-Seal follow the hose as it expands and contracts with temperature, so clamping force is kept more constant. For AN lines there are brackets such as the Fragola -6AN Clamp, which hold the line in place.

How to choose a hose clamp

Several factors determine the choice:

  • Diameter: measure the outer diameter of the hose while it is fitted on the pipe, and choose a clamp where the measurement falls in the middle of its range.
  • Load: pressure, temperature and hose material determine which type will hold up in your particular system.
  • Hose type: perforated bands can cut into silicone hoses, while a smooth band is typically gentler on them.
  • Quantity: several worm gear clamps are available in 10-packs for when a whole project needs to be assembled.

If you need new hoses, you will find them under hoses, lines and tubing, and connectors for AN systems are under fittings and plugs.

Installation and maintenance

Place the clamp behind the pipe's bead, if the pipe has one, so the hose cannot slip off under boost, and tighten according to the manufacturer's instructions – overtightening can damage the hose. After the first heat cycles the hose may settle, so it may be necessary to retighten standard clamps. For hose kits from do88 there are matching clamps, and Turbosmart offers constant tension clamps in several sizes. Mishimoto, Granatelli Motor Sports and COMP Cams are also among the brands. Plain clamping bands can be found under hose clamps.

Frequently asked questions

What is the difference between T-bolt clamps and worm gear clamps?

A worm gear clamp is tightened with a screw in a ribbed or perforated band and is easy to adjust. A T-bolt clamp has a smooth band and a bolt, which typically gives more even pressure and a firmer grip on charge air and silicone hoses.

When do spring-loaded clamps make sense?

Where the hose is exposed to large temperature changes, e.g. on coolant and charge air. The spring can compensate as the hose expands and contracts, so clamping force is kept more even. Whether it is the right choice depends on the hose and system.

How tight should a hose clamp be?

Follow the manufacturer's instructions for the specific clamp. If it is tightened too hard, the band can cut into the hose or squeeze the silicone out; too loose and the joint can leak. It is a good idea to check again after the first few drives.

Why does the hose blow off even though the clamp is tight?

It can be because the pipe lacks a bead, the clamp is positioned incorrectly, oil makes the surface slippery, or the clamp does not match the hose diameter. Boost pressure and hose material also play a part.

View as Grid List
Sort by
Display per page

Magnum FORCE Replacement Clamp Kit

afe59-01012-MA
aFe Magnum FORCE Replacement Clamp Kit SAE 048 (2-9/16 IN ID to 3-1/2 IN ID Range) Pair
145,90 € excl. VAT

Magnum FORCE Replacement Clamp Kit

afe59-01016-MA
aFe Magnum FORCE Replacement Clamp Kit SAE 064 (2-1/2 IN ID to 4-1/2 IN ID Range) Pair
145,90 € excl. VAT

Magnum FORCE Replacement Clamp Kit

afe59-01005-MA
aFe Magnum FORCE Replacement Clamp Kit SAE 012 MINI (11/16 IN ID to 1-1/4 IN ID Range) Pair
129,54 € excl. VAT

Magnum FORCE Replacement Clamp Kit

afe59-01020-MA
aFe Magnum FORCE Replacement Clamp Kit SAE 096 (5-9/16 IN ID to 6-1/2 IN ID Range) Pair
186,83 € excl. VAT

Mishimoto MMCLAMP-225

misMMCLAMP-225
Mishimoto 2.25 Inch Stainless Steel T-Bolt Clamps
104,66 € excl. VAT

Mishimoto MMCLAMP-CTWG-105

misMMCLAMP-CTWG-105
Mishimoto Constant Tension Worm Gear Clamp 3.27in.-4.13in. (83mm-105mm)
105,15 € excl. VAT

Mishimoto MMCLAMP-CTWG-117

misMMCLAMP-CTWG-117
Mishimoto Constant Tension Worm Gear Clamp 3.74in.-4.61in. (95mm-117mm)
106,98 € excl. VAT

Mishimoto MMCLAMP-WG-101HT

misMMCLAMP-WG-101HT
Mishimoto High-Torque Worm Gear Clamp 3.07in.-3.98in. (78mm-101mm) - Pack of 2
98,76 € excl. VAT

Mishimoto MMCLAMP-WG-114HT

misMMCLAMP-WG-114HT
Mishimoto High-Torque Worm Gear Clamp 3.54in.-4.49in. (90mm-114mm) - Pack of 2
98,76 € excl. VAT

Mishimoto MMCLAMP-WG-127HT

misMMCLAMP-WG-127HT
Mishimoto High-Torque Worm Gear Clamp 4.13in.-5.00in. (105mm-127mm) - Pack of 2
98,76 € excl. VAT

Mishimoto MMCLAMP-WG-12HT

misMMCLAMP-WG-12HT
Mishimoto High-Torque Worm Gear Clamp 0.31in.-0.47in. (8mm-12mm) - Pack of 10
104,42 € excl. VAT

Mishimoto MMCLAMP-WG-16HT

misMMCLAMP-WG-16HT
Mishimoto High-Torque Worm Gear Clamp 0.39in.-0.63in. (10mm-16mm) - Pack of 10
106,98 € excl. VAT

Mishimoto MMCLAMP-WG-20HT

misMMCLAMP-WG-20HT
Mishimoto High-Torque Worm Gear Clamp 0.43in.-0.79in. (11mm-20mm) - Pack of 10
104,48 € excl. VAT

Mishimoto MMCLAMP-WG-44HT

misMMCLAMP-WG-44HT
Mishimoto High-Torque Worm Gear Clamp 0.83in.-1.73in. (21mm-44mm) - Pack of 10
109,77 € excl. VAT

Mishimoto MMCLAMP-WG-51HT

misMMCLAMP-WG-51HT
Mishimoto High-Torque Worm Gear Clamp 1.06in.-2.01in. (27mm-51mm) - Pack of 10
106,98 € excl. VAT

Mishimoto MMCLAMP-WG-57HT

misMMCLAMP-WG-57HT
Mishimoto High-Torque Worm Gear Clamp 1.30in.-2.24in. (33mm-57mm) - Pack of 10
106,98 € excl. VAT

Mishimoto MMCLAMP-WG-64HT

misMMCLAMP-WG-64HT
Mishimoto High-Torque Worm Gear Clamp1.57in.-2.52in. (40mm-64mm) - Pack of 10
106,98 € excl. VAT

Mishimoto MMCLAMP-WG-76HT

misMMCLAMP-WG-76HT
Mishimoto High-Torque Worm Gear Clamp 2.05in.-2.99in. (52mm-76mm) - Pack of 2
90,62 € excl. VAT

Mishimoto MMCLAMP-WG-95HT

misMMCLAMP-WG-95HT
Mishimoto High-Torque Worm Gear Clamp 2.83in.-3.74in. (72mm-95mm) - Pack of 2
90,62 € excl. VAT

Mishimoto MMCLAMP-WGP-59

misMMCLAMP-WGP-59
Mishimoto Sure Grip Worm Gear Clamp 59mm 10-Pack
246,24 € excl. VAT

Mishimoto MMCLAMP-WGP-65

misMMCLAMP-WGP-65
Mishimoto Sure Grip Worm Gear Clamp 65mm - Pack of 10
247,40 € excl. VAT

Mishimoto MMCLAMP-WGP-95

misMMCLAMP-WGP-95
Mishimoto Sure Grip Worm Gear Clamp 95mm 2-Pack
128,80 € excl. VAT

Multi-Purpose Clamp - TS-ECK-150

turTS-ECK-150
Turbosmart 304SS 1.5in V-Band Coupling Kit
514,02 € excl. VAT

Multi-Purpose Clamp - TS-ECK-175

turTS-ECK-175
Turbosmart 304SS 1.75in V-Band Coupling Kit
547,28 € excl. VAT