Mechanical Fuel Pumps
Is the fuel pump on your carburettor engine driven by the camshaft, and does your project now need more fuel than before? In this category we've gathered mechanical pumps for both petrol and diesel engines, as well as eccentrics for the pump drive.
What does a mechanical fuel pump do?
A mechanical pump is typically driven by an eccentric on the camshaft via a lever arm and delivers a relatively low pressure that suits many carburettor systems. It requires no power supply, but its output depends on engine speed. Ford Racing, for example, has a fuel pump eccentric in the category. If you run fuel injection or need higher pressure, an electric solution among inline fuel pumps or in-tank fuel pumps is typically more relevant.
How to choose the right pump
- Engine family: the product name indicates which engine the pump is made for, e.g. SBC or BBC from Edelbrock.
- Flow and pressure: choose based on your engine's fuel demand and your carburettor's requirements. More flow isn't automatically better, as excessive pressure can cause problems with the needle valve.
- Fuel type: some pumps are for petrol only, e.g. a Victor Series pump marked Gas Only.
- Diesel: Industrial Injection, for example, offers a mechanical pump for the Chevrolet 6.5L.
When fitting, check gaskets, fittings and the lever arm's contact with the eccentric, and inspect regularly for leaks.
Frequently asked questions
Can I use a mechanical pump with fuel injection?
Typically not, as mechanical pumps deliver lower pressure than most fuel injection systems require. Check your system's pressure requirements; an electric in-tank or inline pump is often necessary.
What are the signs of a worn mechanical fuel pump?
Typical signs are traces of fuel or oil around the pump, dropping pressure at high revs or starting problems. The cause may also be a worn eccentric or a leaking hose, so check the entire supply system.
Does a mechanical fuel pump require approval for roadworthiness inspection?
It depends on the product and the car. Check for the specific part number whether approval requirements apply, and make sure hoses and fittings are correctly fitted and leak-free.