0

Hand Guards

Does your clutch or brake lever snap when the bike goes down, or do branches whack your fingers on the trail? Here we bring together handguards, aluminium bars and clamps that protect your hands and levers, for you who ride enduro, off-road or want shielding from wind and dirt.

Handguards with or without aluminium bar

Protection ranges from plastic shields that mainly deflect wind, mud and branches to solutions where the shield is mounted on a load-bearing aluminium bar, e.g. Cycra Probend Bar Pack. A bar can typically give the levers more protection in a crash, but how much depends on design and mounting. At Cycra you will find, for example, the Rebound DX, Series One Enduro DX and CRM Ultra series, where shield and cover are available in different colours. The category also includes products from Renthal and Mustang Motorcycle.

How to choose hand protection

The most important measurement is the handlebar diameter, because the clamps must fit precisely. For example, CRM Ultra clamps are available for both 7/8 inch and 1-1/8 inch, so measure the bar at the clamping point before you order. Also consider:

  • Use: shielding from wind and dirt or protection against rocks, branches and crashes
  • Clearance around levers, switches and cables so nothing gets pinched at full steering lock
  • Whether clamps are available separately, e.g. CRM Clamps, so you can replace a single part after a crash

Check the bolts regularly and always after a crash, as a loose clamp can let the guard rotate into the lever. The levers and controls themselves can be found under motorcycle levers and controls.

Frequently asked questions

How do I know whether I need clamps for 7/8 or 1-1/8 inch?

Measure the handlebar diameter where the clamp will sit. 7/8 inch corresponds to approx. 22 mm and 1-1/8 inch to approx. 28.6 mm. Tapered bars are typically thinner towards the ends, so the measurement depends on the mounting point.

What is the difference between a handguard with and without a bar?

A guard without a bar mainly protects against wind, mud and branches. With an aluminium bar, e.g. Probend, the shield sits on a load-bearing frame, which can typically give levers and hands more protection in a crash.

Can I ride on public roads with handguards fitted?

It depends on the product and the motorcycle. For example, the guards must not cover lights or indicators or restrict steering lock. Check the approval and requirements for the specific part number before riding on the road or going for inspection.

View as Grid List
Sort by
Display per page