0

Mufflers & Resonators

Does your exhaust drone annoyingly on the motorway, or does your car sound too tame when you put your foot down? Mufflers and resonators shape the sound of the exhaust system. We bring together the parts for you who want to replace a worn original muffler, change the sound character or build a new system for your project.

The difference between a muffler and a resonator

A muffler reduces the overall sound level of the exhaust, typically using chambers, perforated tubes or sound-absorbing material. A resonator targets specific frequencies and can remove the drone that can occur at a constant cruising speed. Many systems use both, so the sound can be powerful under acceleration and calmer on the open road. How the result sounds depends on the entire exhaust system, the engine and the placement under the car.

How to choose a muffler

Measure your existing system before you choose. The product names typically state the most important dimensions, e.g. Flowmaster 2.5 IN(O)/OUT(C) Super 10 SS Muffler, where O and C stand for offset and centred inlet and outlet.

  • Pipe diameter: the inlet and outlet must match your pipes, otherwise an adapter is required.
  • Inlet and outlet position: centred or offset determines how the piping can be routed.
  • Body and length: the muffler must fit under the car with clearance to the floor, tank and rear axle. For example, the aFe ATLAS Muffler is listed with a round body, 7 inches in diameter and 16 inches long.
  • Sound character: the sound varies between series and models from e.g. Flowmaster, Borla and Magnaflow, so read the description for the specific part number.
  • Material: several models are made of stainless steel, which typically resists corrosion better than ordinary steel.

Installation, inspection and maintenance

Welded joints typically give the tightest fit, while clamps make it easier to adjust and replace the parts later. Check hangers and heat shields so the muffler does not hit the floor or transfer vibrations to the body. A freer-flowing muffler can raise the sound level, and whether it can pass inspection depends on the product and the car. So check the noise requirements and any approval for the specific part number. Replace the muffler if it rattles inside or has rusted through.

Frequently asked questions

Should I choose a muffler or a resonator?

It depends on your goal. If you want to change the overall sound level, the muffler is the key choice. If the problem is a drone at certain revs or cruising speed, a resonator can typically help. Many systems combine both.

What do O and C mean in the product names?

O stands for offset and C for centred position of the inlet or outlet. For example, a Flowmaster 2.5 IN(O)/OUT(C) has an offset inlet and a centred outlet. The position must match the piping under your car.

Can my car pass inspection with a new muffler?

It depends on the product and the car. A freer-flowing muffler can result in a higher sound level than permitted. Check the noise requirements and any approval for the specific part number before you install it.

Why does my car drone after fitting a new muffler?

A drone at cruising speed can be caused by the new muffler amplifying certain frequencies, or by a resonator having been removed. It can also come from pipes touching the floor. Check the hangers and consider a resonator.

View as Grid List
Sort by
Display per page

Gibson Exhaust Muffler

gib788200S
Gibson SFT Superflow Offset/Offset Round Muffler - 6x19in/2.5in Inlet/2.5in Outlet - Stainless
2.337,09 € excl. VAT

Gibson Exhaust Muffler

gib55152S
Gibson CFT Superflow Center/Center Oval Muffler - 4x9x18in/2.5in Inlet/2.5in Outlet - Stainless
2.237,90 € excl. VAT

Gibson Exhaust Muffler

gib788706S
Gibson SFT Superflow Offset/Offset Round Muffler - 6x19in/2.25in Inlet/2.25in Outlet - Stainless
2.512,73 € excl. VAT

Gibson Exhaust Muffler

gib55192S
Gibson CFT Superflow Offset/Center Oval Muffler - 4x9x18in/2.5in Inlet/2.5in Outlet - Stainless
1.448,39 € excl. VAT

Gibson Exhaust Muffler

gib788050S
Gibson SFT Superflow Dual/Center Round Muffler - 8x24in/3in Inlet/4in Outlet - Stainless
3.626,63 € excl. VAT

Gibson Exhaust Muffler

gib55109S
Gibson CFT Superflow Dual/Dual Oval Muffler - 4x9x13in/3in Inlet/3in Outlet - Stainless
2.665,07 € excl. VAT

Gibson Exhaust Muffler

gib55189S
Gibson CFT Superflow Center/Dual Oval Muffler - 4x9x18in/3in Inlet/2.5in Outlet - Stainless
3.026,39 € excl. VAT

Gibson Exhaust Muffler

gibBM0100
Gibson MWA Superflow Offset/Center Oval Muffler - 4x9x14in/2.25in Inlet/2.25in Outlet - Stainless
1.255,60 € excl. VAT

Gibson Exhaust Muffler

gib788705S
Gibson SFT Superflow Offset/Offset Round Muffler - 8x19in/2.5in Inlet/3in Outlet - Stainless
2.866,68 € excl. VAT

Gibson Exhaust Muffler

gibBM0110
Gibson MWA Superflow Center/Dual Oval Muffler - 4x9x14in/3in Inlet/3in Outlet - Stainless
1.298,06 € excl. VAT

Gibson Exhaust Muffler

gib788700S
Gibson SFT Superflow Offset/Offset Round Muffler - 6x24in/2.25in Inlet/2.25in Outlet - Stainless
2.512,73 € excl. VAT

Gibson Marine

gib110001
Gibson Marine Bullet Muffler (Pair) - 4in Inlet/11in Length - Stainless
7.004,05 € excl. VAT

Granatelli Exhaust Muffler

gms313541
Granatelli 3.0in Inlet 3.0in Outlet 13x9.5x6in Oval Muffler
1.373,28 € excl. VAT

Injen Universal Muffler

injSES225TT
Injen 2 3/8 Universal Muffler w/Titanium burnt rolled Tip and stainless steel resonated inner wall
2.474,36 € excl. VAT

Injen Universal Muffler

injSES225C
Injen 2 3/8 Universal Muffler w/Stainless Steel resonated rolled tip (Injen embossed logo)
2.047,25 € excl. VAT

Injen Universal Muffler

injSES300TT
Injen 3.00 Universal Muffler w/Titanium burnt rolled Tip and stainless steel resonated inner wall
2.518,51 € excl. VAT

MACH Force-Xp Resonator Delete Pipe

afe49M10005
aFe MACH Force-Xp 304 SS Resonator 3in. Inlet/Outlet / 3in. Diameter / 16in. Length
941,98 € excl. VAT

MACH Force-Xp Resonator Delete Pipe

afe49M10010
aFe MACH Force-Xp Resonator Delete Pipe 3 IN Inlet/Outlet x 3 IN Dia. x 19 IN Overall L w/ Clamps
786,41 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M00024
aFe MACH Force-Xp 409 SS Muffler 3-1/2in ID Center/Center x 7in Dia x 24in L - Round Body
1.922,40 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M00021
aFe MACH Force-Xp 409 SS Muffler 2.5in Center/Center 18in L x 6in Dia - Round Body
1.515,77 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M30016
aFe MACH Force-Xp Muffler 3 IN ID Center/Offset x 11 IN W x 5 IN H x 22 IN L - Oval Body
2.486,76 € excl. VAT