0

Mufflers & Resonators

Does your exhaust drone annoyingly on the motorway, or does your car sound too tame when you put your foot down? Mufflers and resonators shape the sound of the exhaust system. We bring together the parts for you who want to replace a worn original muffler, change the sound character or build a new system for your project.

The difference between a muffler and a resonator

A muffler reduces the overall sound level of the exhaust, typically using chambers, perforated tubes or sound-absorbing material. A resonator targets specific frequencies and can remove the drone that can occur at a constant cruising speed. Many systems use both, so the sound can be powerful under acceleration and calmer on the open road. How the result sounds depends on the entire exhaust system, the engine and the placement under the car.

How to choose a muffler

Measure your existing system before you choose. The product names typically state the most important dimensions, e.g. Flowmaster 2.5 IN(O)/OUT(C) Super 10 SS Muffler, where O and C stand for offset and centred inlet and outlet.

  • Pipe diameter: the inlet and outlet must match your pipes, otherwise an adapter is required.
  • Inlet and outlet position: centred or offset determines how the piping can be routed.
  • Body and length: the muffler must fit under the car with clearance to the floor, tank and rear axle. For example, the aFe ATLAS Muffler is listed with a round body, 7 inches in diameter and 16 inches long.
  • Sound character: the sound varies between series and models from e.g. Flowmaster, Borla and Magnaflow, so read the description for the specific part number.
  • Material: several models are made of stainless steel, which typically resists corrosion better than ordinary steel.

Installation, inspection and maintenance

Welded joints typically give the tightest fit, while clamps make it easier to adjust and replace the parts later. Check hangers and heat shields so the muffler does not hit the floor or transfer vibrations to the body. A freer-flowing muffler can raise the sound level, and whether it can pass inspection depends on the product and the car. So check the noise requirements and any approval for the specific part number. Replace the muffler if it rattles inside or has rusted through.

Frequently asked questions

Should I choose a muffler or a resonator?

It depends on your goal. If you want to change the overall sound level, the muffler is the key choice. If the problem is a drone at certain revs or cruising speed, a resonator can typically help. Many systems combine both.

What do O and C mean in the product names?

O stands for offset and C for centred position of the inlet or outlet. For example, a Flowmaster 2.5 IN(O)/OUT(C) has an offset inlet and a centred outlet. The position must match the piping under your car.

Can my car pass inspection with a new muffler?

It depends on the product and the car. A freer-flowing muffler can result in a higher sound level than permitted. Check the noise requirements and any approval for the specific part number before you install it.

Why does my car drone after fitting a new muffler?

A drone at cruising speed can be caused by the new muffler amplifying certain frequencies, or by a resonator having been removed. It can also come from pipes touching the floor. Check the hangers and consider a resonator.

View as Grid List
Sort by
Display per page

MACH Force-Xp Stainless Muffler

afe49M00016-B
aFe MACH Force-Xp 409 SS Muffler w/ Black Finish 3in Center/Offset 22in L x 11in x 5in - Oval Body
3.139,69 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M30059
aFe MACH Force-Xp Muffler 3 IN ID Center/Center x 5 IN Dia. x 19 IN Overall Length - Round Body
1.420,72 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M00002
aFe Scorpion Replacement Alum Steel Muffler Double Layer 2-1/2in In/Out Center/Offset 18inL x9inW
1.342,94 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M00020
aFe MACH Force XP SS Muffler 3in Center Inlet / 3in Offset Outlet 18in L x 9in W x4in H Body
1.601,65 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M00055
aFe MACH Force-Xp 409 SS Muffler 3in Dual Inlet/Dual Outlet 5in H x 8in W x 18in L - Oval Body
1.685,27 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M00016
aFe MACH Force XP SS Muffler 3in Center Inlet / 3in Offset Outlet 22in L x 11n W x 6in H Body
2.231,64 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M00019
aFe MACH Force XP SS Muffler 2.5in Center Inlet / 2.5in Offset Outlet 18in L x 9in W x4in H Body
1.575,68 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M00015
aFe MACH Force XP SS Muffler 3in Center Inlet / 3in Offset Outlet 22in L x 11in W x 6in H Body
2.231,64 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M00052
aFe MACH Force-Xp Muffler 2-1/2 IN Dual Inlet/Dual Outlet 5 IN H x 8 IN W x 18 IN L - Oval Body
1.430,15 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M00030
aFe MACH Force-Xp 409 SS Muffler 3in ID Offset/Offset x 4in H x 9in W x 14in L - Oval Body
1.290,94 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M30015
aFe MACH Force-Xp Muffler 3 IN ID Center/Dual-Outlet x 11 IN W x 6 IN H x 22 IN L - Oval Body
2.671,04 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M00012
aFe MACH Force-Xp 409 SS Muffler 3in Center/Center 14in L x 6in Dia - Round Body
1.246,55 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M00014
aFe MACH Force XP SS Muffler 3in Center Inlet / 2.5in Dual Outlets 22in L x 11in W x 6in H Body
2.231,64 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M00028
aFe MACH Force-Xp 409 SS Muffler 2.5in Offset Inlet/2.5in Offset Outlet 14in L x 9in W x 4in H Body
1.290,94 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M30045
aFe MACH Force-Xp Muffler 2-1/2 IN ID Center/Center x 9 IN Dia. x 14 IN L - Round Body
1.332,48 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M30053
aFe MACH Force-Xp Muffler Delete Pipe 2-1/2 IN ID Inlet/Outlet x 24 IN Overall Length
1.052,97 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M00029
aFe MACH Force-Xp Muffler 2-1/2 IN ID Offset/Center x 9 IN W x 4 IN H x 14 IN L - Oval Body
1.290,94 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M00017
aFe MACH Force XP SS Muffler 3in Center Inlet / 3in Offset Outlet 22in L x 9in W x4in H Body
1.767,80 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M00031
aFe MACH Force XP SS Muffler 3in Center Inlet / 3in Outlet 9in L x 4in W x 14in Body
1.342,63 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M00003
aFe Scorpion Replacement Alum Steel Muffler 2-1/2in In/Out Baffled Offset/Offset 13inL x10inW x4inH
1.112,57 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M00007
aFe MACH Force-Xp 409 SS Muffler 2-1/2in Center/Center 14in L X 6in Dia - Round Body
1.447,72 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49-91012
aFe MACH Force XP Exhausts Mufflers SS-409 EXH Muffler 5 ID In/Out 8 Dia
2.042,32 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49M30050
aFe MACH Force-Xp 409 SS Muffler 3in Center/Center 18in L X 5in Dia - Round Body
1.541,26 € excl. VAT

MACH Force-Xp Stainless Muffler

afe49-91010
aFe MACH Force XP Exhausts Mufflers SS-409 EXH Muffler 3In/Out 5x11 Body Brushed
2.035,09 € excl. VAT