0

Mufflers & Resonators

Does your exhaust drone annoyingly on the motorway, or does your car sound too tame when you put your foot down? Mufflers and resonators shape the sound of the exhaust system. We bring together the parts for you who want to replace a worn original muffler, change the sound character or build a new system for your project.

The difference between a muffler and a resonator

A muffler reduces the overall sound level of the exhaust, typically using chambers, perforated tubes or sound-absorbing material. A resonator targets specific frequencies and can remove the drone that can occur at a constant cruising speed. Many systems use both, so the sound can be powerful under acceleration and calmer on the open road. How the result sounds depends on the entire exhaust system, the engine and the placement under the car.

How to choose a muffler

Measure your existing system before you choose. The product names typically state the most important dimensions, e.g. Flowmaster 2.5 IN(O)/OUT(C) Super 10 SS Muffler, where O and C stand for offset and centred inlet and outlet.

  • Pipe diameter: the inlet and outlet must match your pipes, otherwise an adapter is required.
  • Inlet and outlet position: centred or offset determines how the piping can be routed.
  • Body and length: the muffler must fit under the car with clearance to the floor, tank and rear axle. For example, the aFe ATLAS Muffler is listed with a round body, 7 inches in diameter and 16 inches long.
  • Sound character: the sound varies between series and models from e.g. Flowmaster, Borla and Magnaflow, so read the description for the specific part number.
  • Material: several models are made of stainless steel, which typically resists corrosion better than ordinary steel.

Installation, inspection and maintenance

Welded joints typically give the tightest fit, while clamps make it easier to adjust and replace the parts later. Check hangers and heat shields so the muffler does not hit the floor or transfer vibrations to the body. A freer-flowing muffler can raise the sound level, and whether it can pass inspection depends on the product and the car. So check the noise requirements and any approval for the specific part number. Replace the muffler if it rattles inside or has rusted through.

Frequently asked questions

Should I choose a muffler or a resonator?

It depends on your goal. If you want to change the overall sound level, the muffler is the key choice. If the problem is a drone at certain revs or cruising speed, a resonator can typically help. Many systems combine both.

What do O and C mean in the product names?

O stands for offset and C for centred position of the inlet or outlet. For example, a Flowmaster 2.5 IN(O)/OUT(C) has an offset inlet and a centred outlet. The position must match the piping under your car.

Can my car pass inspection with a new muffler?

It depends on the product and the car. A freer-flowing muffler can result in a higher sound level than permitted. Check the noise requirements and any approval for the specific part number before you install it.

Why does my car drone after fitting a new muffler?

A drone at cruising speed can be caused by the new muffler amplifying certain frequencies, or by a resonator having been removed. It can also come from pipes touching the floor. Check the hangers and consider a resonator.

View as Grid List
Sort by
Display per page

Stainless Works 1968-72 Corvette Exh.

sswV6872SW
Stainless Works 1968-72 Corvette Exhaust SB 2-1/2in Factory Style Mufflers
13.903,14 € excl. VAT

Stainless Works 1973-81 Corvette Exh.

sswV7381SW
Stainless Works 1973-82 Corvette Exhaust 2-1/2in Factory Style Mufflers
13.903,14 € excl. VAT

Stainless Works 2003-11 Crown Vic Exh.

sswCRVIC03CBLMF
Stainless Works 2003-11 Crown Victoria/Grand Marquis 4.6L 2-1/2in Exhaust S-Tube Mufflers
13.719,71 € excl. VAT

Stainless Works 2007-10 GT500 Exhaust

sswM09GT
Stainless Works 2007-10 Shelby GT500 3in Catback Chambered Mufflers
13.056,39 € excl. VAT

Stainless Works 2007-10 GT500 Exhaust

sswM09GTL
Stainless Works 2007-10 Shelby GT500 3in Catback S-Tube Mufflers
12.846,09 € excl. VAT

Stainless Works 2007-10 GT500 Exhaust

sswM08GTL
Stainless Works 2007-10 Shelby GT500 3in Catback X-Pipe S-Tube Mufflers
12.759,61 € excl. VAT

Stainless Works 2007-10 GT500 Exhaust

sswM08GT
Stainless Works 2007-10 Shelby GT500 3in Catback X-Pipe Chambered Mufflers
12.759,61 € excl. VAT

Stainless Works 2011-14 Mustang Exh.

sswM12CB3HDR
Stainless Works 2011-14 Mustang GT/2011-2012 Shelby GT500 3in Catback Retro Chambered Mufflers
13.509,71 € excl. VAT

Stainless Works 2011-14 Mustang Exh.

sswM12CB3
Stainless Works 2011-14 Mustang GT/2011-2012 Shelby GT500 3in Catback Retro Chambered Mufflers
13.509,71 € excl. VAT

Stainless Works 2013-14 GT500 Exh.

sswM13GT
Stainless Works 2013-14 Ford Shelby GT500 3in Catback Retro Chambered Mufflers
14.091,60 € excl. VAT

Stainless Works 2015-20 Mustang Eco. Exh

sswM15ECBSW
Stainless Works 2015-16 Mustang 2-1/2in Catback Retro Chambered Mufflers
12.929,89 € excl. VAT

Stainless Works 3-1/2" Race Muffler

sswRM35
Stainless Works 3.5in OD 4.25in Body 5in Length Race Muffler
1.280,85 € excl. VAT

Stainless Works 4" Race Muffler

sswRM40
Stainless Works 4in OD 4.75in Body 5in Length Race Muffler
1.438,12 € excl. VAT

Stainless Works 68-72 Chevelle LS1 Exh

sswCV6872LSD
Stainless Works Chevy Chevelle LS1 Hot Rod 1968-72 Exhaust 3in Stainless Turbo Mufflers
12.673,98 € excl. VAT