0

Mufflers & Resonators

Does your exhaust drone annoyingly on the motorway, or does your car sound too tame when you put your foot down? Mufflers and resonators shape the sound of the exhaust system. We bring together the parts for you who want to replace a worn original muffler, change the sound character or build a new system for your project.

The difference between a muffler and a resonator

A muffler reduces the overall sound level of the exhaust, typically using chambers, perforated tubes or sound-absorbing material. A resonator targets specific frequencies and can remove the drone that can occur at a constant cruising speed. Many systems use both, so the sound can be powerful under acceleration and calmer on the open road. How the result sounds depends on the entire exhaust system, the engine and the placement under the car.

How to choose a muffler

Measure your existing system before you choose. The product names typically state the most important dimensions, e.g. Flowmaster 2.5 IN(O)/OUT(C) Super 10 SS Muffler, where O and C stand for offset and centred inlet and outlet.

  • Pipe diameter: the inlet and outlet must match your pipes, otherwise an adapter is required.
  • Inlet and outlet position: centred or offset determines how the piping can be routed.
  • Body and length: the muffler must fit under the car with clearance to the floor, tank and rear axle. For example, the aFe ATLAS Muffler is listed with a round body, 7 inches in diameter and 16 inches long.
  • Sound character: the sound varies between series and models from e.g. Flowmaster, Borla and Magnaflow, so read the description for the specific part number.
  • Material: several models are made of stainless steel, which typically resists corrosion better than ordinary steel.

Installation, inspection and maintenance

Welded joints typically give the tightest fit, while clamps make it easier to adjust and replace the parts later. Check hangers and heat shields so the muffler does not hit the floor or transfer vibrations to the body. A freer-flowing muffler can raise the sound level, and whether it can pass inspection depends on the product and the car. So check the noise requirements and any approval for the specific part number. Replace the muffler if it rattles inside or has rusted through.

Frequently asked questions

Should I choose a muffler or a resonator?

It depends on your goal. If you want to change the overall sound level, the muffler is the key choice. If the problem is a drone at certain revs or cruising speed, a resonator can typically help. Many systems combine both.

What do O and C mean in the product names?

O stands for offset and C for centred position of the inlet or outlet. For example, a Flowmaster 2.5 IN(O)/OUT(C) has an offset inlet and a centred outlet. The position must match the piping under your car.

Can my car pass inspection with a new muffler?

It depends on the product and the car. A freer-flowing muffler can result in a higher sound level than permitted. Check the noise requirements and any approval for the specific part number before you install it.

Why does my car drone after fitting a new muffler?

A drone at cruising speed can be caused by the new muffler amplifying certain frequencies, or by a resonator having been removed. It can also come from pipes touching the floor. Check the hangers and consider a resonator.

View as Grid List
Sort by
Display per page

Stainless Works Chambered Turbo Muffler

sswTM4C22O22OPS
Stainless Works 2.25in ID OFFSET INLET/ 2.25in OD OFFSET OUTLET (OPPOSITE SIDES) 4inX8in
2.820,58 € excl. VAT

Stainless Works Chambered Turbo Muffler

sswTM4C25O25OPS
Stainless Works 2.5in ID OFFSET INLET/ 2.5in OD OFFSET OUTLET (ON OPPOSITE SIDES) 4inX8in
2.820,58 € excl. VAT

Stainless Works Chambered Turbo Muffler

sswTM5C2C2C
Stainless Works 2in ID CENTER INLET/ 2in OD CENTER OUTLET 5inX9in
2.820,58 € excl. VAT

Stainless Works Chambered Turbo Muffler

sswTM5C2O2C
Stainless Works 2in ID OFFSET INLET/ 2in OD CENTER OUTLET 5inX9in
2.820,58 € excl. VAT

Stainless Works Chambered Turbo Muffler

sswTM5C22O22OSS
Stainless Works 2.25in ID OFFSET INLET/ 2.25in OD OFFSET OUTLET (ON SAME SIDE) 5inX9in
2.820,58 € excl. VAT

Stainless Works Chambered Turbo Muffler

sswTM5C22O22OPS
Stainless Works 2.25in ID OFFSET INLET/ 2.25in OD OFFSET OUTLET (ON OPPOSITE SIDES) 5inX9in
2.820,58 € excl. VAT

Stainless Works Chambered Turbo Muffler

sswTM4C2O2C
Stainless Works 2in ID OFFSET INLET/ 2in OD CENTER OUTLET 4inX8in
2.820,58 € excl. VAT

Stainless Works Chambered Turbo Muffler

sswTM4C2C2C
Stainless Works 2in ID CENTER INLET/2in OD CENTER OUTLET 4inX8in
2.820,58 € excl. VAT

Stainless Works Chambered Turbo Muffler

sswTM5C25O25C
Stainless Works 2.5in ID OFFSET INLET/ 2.5in OD CENTER OUTLET 5inX9in
1.757,46 € excl. VAT

Stainless Works Chambered Turbo Muffler

sswTM4C22C22O
Stainless Works 2.25in ID CENTER INLET/ 2.25in OD OFFSET OUTLET 4inX8in
2.820,58 € excl. VAT

Stainless Works Chambered Turbo Muffler

sswTM5C22C22O
Stainless Works 2.25in ID CENTER INLET/ 2.25in OD OFFSET OUTLET 5inX9in
2.820,58 € excl. VAT

Stainless Works Chambered Turbo Muffler

sswTM5C25O25OSS
Stainless Works 2.5in ID OFFSET INLET/ 2.5in OD OFFSET OUTLET (ON SAME SIDE) 5inX9in
2.820,58 € excl. VAT

Stainless Works Chambered Turbo Muffler

sswTM4C2O2OPS
Stainless Works 2in ID OFFSET INLET/ 2in OD OFFSET OUTLET (ON OPPOSITE SIDES) 4inX8in
2.820,58 € excl. VAT

Stainless Works Chambered Turbo Muffler

sswTM5C3C3C
Stainless Works 3in ID CENTER INLET/ 3in OD CENTER OUTLET 5inX9in
2.820,58 € excl. VAT

Stainless Works Chambered Turbo Muffler

sswTM5C3O3OSS
Stainless Works 3in ID OFFSET INLET/ 3in OD OFFSET OUTLET (ON SAME SIDE) 5inX9in
2.820,58 € excl. VAT

Stainless Works Chambered Turbo Muffler

sswTM5C25C25C
Stainless Works 2.5in ID CENTER INLET/ 2.5in OD CENTER OUTLET 5inX9in
2.820,58 € excl. VAT

Stainless Works Chambered Turbo Muffler

sswTM5C3C3O
Stainless Works 3in ID CENTER INLET/ 3in OD OFFSET OUTLET 5inX9in
1.757,46 € excl. VAT

Stainless Works Chambered Turbo Muffler

sswTM4C25O25C
Stainless Works 2.5in ID OFFSET INLET/ 2.5in OD CENTER OUTLET 4inX8in
2.820,58 € excl. VAT

Stainless Works Chambered Turbo Muffler

sswTM5C22O22C
Stainless Works 2.25in ID OFFSET INLET/ 2.25in OD CENTER OUTLET 5inX9in
2.820,58 € excl. VAT

Stainless Works Chambered Turbo Muffler

sswTM4C25C25C
Stainless Works 2.5in ID CENTER INLET/2.5in OD CENTER OUTLET 4inX8in
2.820,58 € excl. VAT